OMCAN MS-IT-0319-M Manual Meat Slicer Instruction Manual
- June 5, 2024
- OMCAN
Table of Contents
Manual Meat Slicer
Model MS-IT-0319-M Item 44007
Instruction Manual
Revised – 01/27/2022
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no
damage is evident on the external packaging, open carton to ensure all ordered
items are within the box, and there is no concealed damage to the machine. If
the package has suffered rough handling, bumps or damage (visible or
concealed), please note it on the bill of lading before accepting the delivery
and contact Omcan within 24 hours, so we may initiate a claim with the
carrier. A detailed report on the extent of the damage caused to the machine
must be filled out within three days, from the delivery date shown in the
shipping documents. Omcan has no recourse for damaged products that were
shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all
operation and safety instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost
importance to save these instructions for future reference. Also save the
original box and packaging for shipping the equipment if servicing or
returning of the machine is required.
Safety and Warranty
MECHANICAL SAFETY DEVICES
The slicer is manufactured according to the EEC 2006/42 Machinery Directive.
The mechanical safety devices are the following:
- The 360° unmovable blade guard ring protects the blade.
- A specific device allows to expose only the part of the blade used for cutting.
IMPORTANT
The front support feet can be unscrewed and replaced as required according to
the dimensions of the working surface.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor
coverage for component failure or other damages resulting from installation in
non-commercial or residential applications. The right is reserved to deny
shipment for residential usage; if this occurs, you will be notified as soon
as possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at
1-800-465-0234 to schedule an Omcan
authorized service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical
and part failures, not improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can
therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products
separately (differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specifications
| Model | MS-IT-0319-M |
|---|---|
| Blade Size | 12.5” / 319mm |
| Cutting Size | 8” x 8.7” / 203 x 220mm |
| Cut Thickness Range | 0.01” – 0.16” / 0.3 – 4mm |
| Weight | 110 lbs. / 50 kgs. |
| Dimensions | 32.7” x 23” x 22” / 831 x 584 x 559mm |
| Item Number | 44007 |
Installation
The slicer must be placed horizontally on a stable, robust and non-slip base adequate to support its weight. The suggested height of the working surface is about 800mm. Check out that the product tray motion has no hindrance and that the product can be easily loaded. It is possible to move the front support feet according to the depth of the working surface.
WARNING: To prevent the risk of crushing, position the machine so as to leave a clear space between the moving parts and the permanent structure.
PRELIMINARY CLEANING
The machine has to be cleaned from the protection oil. Please follow the
instructions detailed in Maintenance.
WARNING The working surface must always be cleaned.
Operation
SLICER FUNCTIONING AND USE
This slicer is suitable only for cutting ham and prosciutto
WARNING The following products cannot be sliced:
- Inedible products.
- Foodstuff with bones.
- Frozen products.
-
Check out that the blade is protected by the blade guard
-
By manually moving the flywheel, bring the foodholding plate towards the operator side.
WARNING: Turn the flywheel only in clockwise direction. -
Distance the food-holding plate using the fast plate shifting lever.
-
Place the product on the food-holding plate, press down on the pusher vertical sliding handle and lock it with the self-clamping pusher.
Note: To avoid slicing anomalies (irregular thickness, broken slices, etc.) it is suggested not to let an excessive quantity of the product jut out from the self-clamping pusher. Note: When it is necessary to cut a substantial amount of the product, it is suggested to repeat several times the product re- positioning and re-locking operation by using the self-clamping pusher. -
Arrange the thickness desired slice thickness control is working on cutting. Note: Turning the slice thickness control in clockwise direction increases the slice thickness, whereas turning it in counterclockwise direction reduces it. The knob is equipped with a graduate scale from 1 to 11 (from 0 to 2 mm).
-
Bring the product in the cutting position by using the fast plate shifting lever or the slow plate shifting knob.
WARNING: Leave a 0.5 to 1 cm space between product and blade. -
Turn in counterclockwise direction the blade protection block. The blade guard will move away from the blade, exposing just the part used for cutting.
DANGER: The part of the blade used for cutting is not protected. -
With your right hand rotate the flywheel in clockwise direction.
With such an action you will start the slicing operation.
To unload the product, do the reverse operations.
WARNING Once you finished the cutting operation, do not forget to put back the blade protection by following the described instructions in reverse.
Maintenance
BLADE SHARPENING
If the quality of the cut is not satisfying, the blade must be sharpened. The
time interval between the sharpening operations depends on the use of the
slicer and on the kind of products to be cut. This operation must be
accomplished by qualified personnel. The blade must be replaced when its
diameter is 10mm shorter than the original one.
WARNING
The replacement of the blade is a dangerous operation. If the sharpening
quality is not satisfying, replace both of the grinding stones. Please contact
Omcan customer service.
WARNING
Check that the blade guard covers the part of the blade used for cutting.
SHARPENING OPERATION
For a correct blade sharpening please proceed following the instructions hereafter:
-
Clean the blade, especially from fat leftovers.
-
Distance the food-holding plate from the blade.
-
Lift up the sharpener and rotate it 180°.
WARNING: Risk of injury – Once you have removed the sharpening device, a section of the blade remains uncovered. -
Replace carefully the sharpener, the grinding stones will position themselves on either side of the blade.
-
With your right hand rotate the flywheel clockwise.
-
Sharpening: Press and hold the “A” button to bring the grinding stones in contact with the blade. Perform 20/30 blade rotations with the flywheel. Then release the “A” button and stop the rotation of the blade.
-
Honing: Press and hold the “B” button and bring it in contact with the blade. Perform 1/2 blade rotations with the flywheel. Then release the “B” button and stop the blade rotation.
-
With your right hand rotate the flywheel clockwise.
-
Lift and rotate by 180° degrees the sharpener and reposition it in its initial position.
GRINDING STONES CLEANING
To obtain an excellent sharpening the grinding stones must always be clean.
Remove dirt and grease with alcohol and the supplied brush.
MAINTENANCE
SPARE PARTS Please request only original spare parts.
CLEANING
After long periods of inactivity, always perform the cleaning operations
before using the machine again. Clean all the accessible parts by using a
cloth damped with water.
WARNING
Please avoid water jets.
DANGER
Please be careful during the cleaning operations: danger of injury.
WARNING
Check that the front blade protection covers the part of the blade used for
cutting.
COMPONENTS REMOVAL
FOOD-HOLDING PLATE
- Turn the food-holding plate locking lever counterclockwise
- Pull up and remove the food holding plate.
SLICE-DEFLECTOR
- Loosen the screw and remove the slice deflector.
SLICER RECEIVING TRAY
- Loosen the two handles and pull out the tray
BLADE CLEANING
DANGER
During the blade cleaning operations, carefully avoid accidental contacts with
the blade. · Clean the blade front side with a wet cloth and move it slowly
outwards from the centre, as indicated by the arrow. Dry with another cloth,
then clean the back side of the blade in the same way.
BLADE PROTECTION CLEANING
-
Clean the blade guard ring front side with a wet cloth.
-
Turn in counterclockwise direction the blade protection block.
DANGER: The part of the blade used for cutting is now uncovered. -
Clean the blade guard ring back side with a wet cloth.
-
Once you finish the cleaning operation, turn the blade protection block clockwise, the blade guard will cover the blade.
IMPORTANT: All the disassembled parts have to be cleaned individually with water and dishes detergent (do not use strong detergents), using a brush or a cloth. Then rinse them in warm water and dry them.
LUBRICATION
LUBRICATION OF THE CARRIAGE GUIDE BAR
This operation must be performed after cleaning the machine or whenever there
are sliding problems. We suggest to use SHELL ONDINA 15 or ESSO MARCOL 82
oils.
- By activating the flywheel, move the carriage with the food-holding plate towards the operator.
- Squeeze the lubricating oil into the specific carriage guide bar lubricator.
- By activating the flywheel, let the carriage run back and forth several times.
Parts Breakdown
Model MS-IT-0319-M 44007
Model MS-IT-0319-M 44007
Model MS-IT-0319-M 44007
Model MS-IT-0319-M 44007
Model MS-IT-0319-M 44007
Model MS-IT-0319-M 44007
Model MS-IT-0319-M 44007
Model MS-IT-0319-M 44007
Item No.| Description| Position| Item No.|
Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
65118| Sharpener Assembled Red for 44007| A1151R| 65136| Arm Pressam.Cromato
Ass. for 44007| B7984CR| 65160| Flywheel Spacer for 44007| D5312
65120| Tree Flyer for 44007| A3176| 65139| Aluminum Hood Red for 44007|
C1640R| 65161| Spacer Shaft Corona for 44007| D5313
65121| Shaft for Wheel IN. (Z.36) for 44007| A3177| 65142| Flywheel Cart for
44007| C1896| 65162| Spacer Bar Øi7x18x10 for 44007| D5314
65122| Shaft for Paral.Est.Mob Sledge for 44007| A3178| 65143| Trolley Ass.
for 44007| C1945| 65163| Conical Spacer Øi7x18x22x10 for 44007| D5315
65123| Blade Door Shaft for 44007| A3180| 65144| Cart Ass. for 44007| C1952|
65164| Spacer Bar2 BCT for 44007| D5316
65124| Compensator Ring 42×12 for 44007| A5016| 65656| Cart Part Crome Assy.
for 44007| C1952CR| 65165| Spacer for 44007| D5317
17279| Ring El.Benzing 5 for 44007| A5403| 65146| Roller Chain 3/8×7/32” L.81p
Closed for 44007| C3003| 65167| Distance Lever AZ.Paral.Est. for 44007|
D576101
16902| Ring El.Benzing 8 for 44007| A5406| 64360| Right Hinge Stainless Steel
Group of INT90E for 44007| C3665| 65166| Distance Barrel Carr. They Fly for
44007| D5828
64355| Ring El.Seeger Ext.12 for 44007| A5444| 65147| Flywheel Hinge Imp. for
44007| C3668| 19554| Bearing Cam A310 for 44007| E1401
36541| Ring El.Seeger Int.35 for 44007| A5470| 36599| Rivet 3.85 for 44007|
C4621| 64367| Wheel Eccentric 104 for 44007| E1430
19174| Ring for 44007| A5475| 36601| Rivet 1.9×5 for 44007| C4640| 65169|
Feltro Cart for 44007| F1616
64356| Oil Seal OR 3043 for 44007| A5849| 36623| Foot Cover for 44007| C6682|
65170| Flat Floor-B3 Pul for 44007| F6084
17287| O-Ring 123 17.86×2.62 for 44007| A5852| 64361| Sharpener Body C33F for
44007| C680764| 65171| Flange Chrome Plate B114 / TRIB for 44007| F6084CR
65125| Flange Ring for 44007| A5960| 65150| Trolley Bar Cover for 44007|
C7184| 65174| Ring Adjusting Device for 44007| G5117
65126| Bar 12×20 Scorr.Carr for 44007| B1067| 65151| Cover Inf. Shoulder for
44007| C7185| 64368| Handle Bar Verticale L250 for 44007| I1938
65127| Cart Bar for 44007| B1746| 65152| Ant. Cover Shoulder S5227 for 44007|
C7186| 65657| Grip. Chrome Vertical Bar 105 for 44007| I1938CR
65128| Cart Bar Transport for 44007| B1747| 65153| Supp. Cover Plate for
44007| C7188| 17357| Deflector Screw for 44007| I1942
65129| Round Bar Ø19×310 Arm for 44007| B1749| 65154| Rack Pressamerce for
44007| C7255| 65176| Handle 6 Lobe D.30 Hole M6 for 44007| I1963
65130| Round Bar Ø19×320 Arm for 44007| B1753| 65155| Rack Advance. Plate for
44007| C7258| 36719| Cover Handle for 44007| I2102
65131| Rod Vernic for 44007| B4010| 36629| Bearing 2Z-6003 17x35x10 for 44007|
C8006| 65178| Handle Regul.Avanz Handle for 44007| I2138
19618| Bushing 8x10x8 for 44007| B6009| 19538| Bearing 20x42x12 for 44007|
C8008| 65179| Chromed Grip Reg.Piatto Handle for 44007| I2138CR
19619| Bushing 8x10x12 for 44007| B6020| 64362| Bearing 2Z-626 6x19x6 for
44007| C8012| 65180| Grip Holder Fix.Piatto Portamerce for 44007| I2145
16904| Bushing Sharpener for 44007| B6048| 17335| Bear.2RS-6203 17x40x12 for
44007| C8022| 65181| Impug. Chromed Fix.Piatto B114 / TRB
for 44007| I2145CR
17303| Bushing DU 12x14x15 for 44007| B6052| 16926| Bearing 2RS-6000 (10x26x8)
for 44007| C8067| 65182| Flying Handle for 44007| I2147
16905| Bushing DU 16x18x15 for 44007| B6053| 65157| Ball Holder 51103 17x30x9
for 44007| C8114| 65183| Imp. for Leva Mov. V.S.F. for 44007| I2161
17304| Bushing for 44007| B6056| 36636| Nut U5589 M6 Stainless Steel for
44007| D0133X| 65184| Imp. Chromed Movement Lever for
44007| I2161CR
16906| Bush Sharpening for 44007| B6075| 64363| Nut Din 917 M10 Inox for
44007| D013615| 65185| Hand Assembly for 44007| I2177
16907| Bush. Sharpening for 44007| B6076| 64364| Nut U5589 M14 Inox for 44007|
D014015| 65186| Handle Ass. for 44007| I2292
17307| Bushing Sharp. for 44007| B6083| 65159| Normal Nut U5588 M12 for 44007|
D0142| 65187| Gripping Assembly V.S.F. for 44007| I2292CR
64358| Bushing Du 12x14x10 for 44007| B6217| 66365| Domed Nut DIN 917 M8
Stainless Steel for 44007| D014515| 65188| Gear Advancement for 44007| I2449
36568| Du Bushing 6x8x6 for 44007| B6224| 36644| U5588 M5 Stainless Steel Nut
for 44007| D016015| 65189| Gear Z16 DP40 M2.5 for 44007| I2474
64359| Bushing Du 14x16x20 for 44007| B6238| 77613| Normal Nut U5588 M4 for
44007| D0161| 65190| Gear Z32 DP80 M2.5 for 44007| I2475
65882| Bushing SI.12x16x15 Sharpener AV3 for 44007| B6242| 19644| Nut M6 for
44007| D0163| 65191| Roller Engraver 3/8×7/32 z.36 for 44007| I2477
65132| Bushing SI.17x25x32x4x35 for 44007| B6372| 36646| Nut U5588 M6
Stainless Steel for 44007| D0163X| 65192| Input Screw S.F.Avat. Avat.On for
44007| I2480
65133| Bushing for Pivot Aff. for 44007| B6373| 36648| Nut U5588 M8 for 44007|
D0165X| 65193| Blade mm 319/19/2 for 44007| L0633
65134| Bush Ingr. V.S.F. for 44007| B6375| 64366| Nut M14x1 for 44007| D0188|
65195| Drive Lever V.S.F. for 44007| L2444
65135| Arm Pressamerce Ass. for 44007| B7984| 36652| Nut M25x1.5 for 44007|
D0198| 65196| Lever Block Gear for 44007| L2445
Model MS-IT-0319-M 44007
Item No.| Description| Position| Item No.|
Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
65197| Lever for Rod for 44007| L2446| 65214| Pin for Imp. Flywheel for 44007|
P3750| 65241| Flat Washer U6953 10x30x2.5 Inox for 44007| R653215
65198| External Operating Lever for 44007| L2447| 65215| Axle Lift Station Pin
V.S.F. for 44007| P3771| 64377| Washer U6592 12 for 44007| R6540
65199| Lever Mov. Screw S.F. B3 Luc. for 44007| L2448| 65216| Ax.Mola
Sbavatrice Pin for 44007| P3788| 64378| Stainless Steel Washer U6593
6,6x18x1,6 for 44007| R680415
65200| Movim Lever Screw S.F. B114 / Trib for 44007| L2448CR| 64372| Support
Motor Flat for 44007| P4623| 36889| Washer 10.5x16x1 for 44007| R6816
14787| Grinding Sharpening Stone 48x15x14.3 for 44007| M6602| 65217| Bearing
Sliding Plate for 44007| P4629| 65232| Washer Spec.Rasam.Ram24 17x24x0.2 for
44007| R6835
21644| F Stone 51x7x14.3 for 44007| M6621| 17438| Foot for 44007| P5030|
65233| Special Washer 8x14x1 Inox for 44007| R6862
36741| Spring 2.9x4x12 Stainless Steel for 44007| M7001| 65218| Plate Posit.
Sharpener Body for 44007| P5147| 36891| Washer 10.5x26x0.5 Stainless Steel
for 44007| R6871
17379| Spring 11.9×0.7×27 Stainless Steel for 44007| M7029| 65219| Plate Supp.
Flat Bearing for 44007| P5149| 16972| Washer 5.5x19x2.5 for 44007| R6884
17380| Spring 13.4×1.3×30 Stainless Steel for 44007| M7030| 65220| Plate Supp.
Sharpener for 44007| P5150| 36893| Stainless Steel Special Washer 8.5x24x2 for
44007| R6897X
19249| Spring 15.1×1.3×18 for 44007| M7035| 65221| Plate Flying Comb 319 for
44007| P5153| 36897| Special Washer 5.5x22x1.5 for 44007| R6932
19781| Spring for 44007| M7049| 65222| Fix Plate Felt Carr. for 44007| P5162|
65234| Blade Fixing Washer for 44007| R6969
19782| Spring 19.5×1.5×16.7 for 44007| M7050| 65223| Plate Assembly Strap for
44007| P5196| 65235| Washer Adjustable Threading for 44007| R6970
17381| Spring 22 5×1 8×18 for 44007| M7052| 65224| Stainless Steel Plate
Posamerce for 44007| P5370| 65236| Washer Dist.Barra Cart for 44007| R6971
65204| Handle Spring Trolley S37 for 44007| M7090| 65225| Stainless Steel
Plate Posamerce.Ass. for 44007| P5732| 65237| Washer Ecc. Ring for 44007|
R6973
64122| Spring Support for 44007| M7099| 65226| Transversal Plate Ass. for
44007| P5739| 65238| Washer Imp. Flywheel for 44007| R6974
65202| Spring 10×50 SP.0.5 for Lever for 44007| M7186| 64373| Pusher
Ass.L250/275 2 Colonne for 44007| P6911| 65239| Rond. Pos. for 44007| R6975
65203| Conical Spring ØI39xØI26x42 Wire Ø2.5
for 44007| M7187| 65228| Presser B114 / TRB Chrome for 44007| P6911CR| 65240|
Washer Ø12×21.8×2 Brass for 44007| R6976
17386| Rubber Shock Absorber for 44007| P1001| 65229| Prisoner M12x90
Galvanized for 44007| P7448| 19677| Wheel Tray for 44007| R8512
36760| Pin Tray Shock-Absorber for 44007| P1025| 65230| Protection Parollice
for 44007| P7858| 19680| Ball 3 17 for 44007| S3005
19797| Nylon Shock 8.5×8 for 44007| P1042| 24030| Sharpener Operating Handle
for 44007| P8625| 19681| Sphere 4 for 44007| S3010
36762| Rubber Plug for 44007| P1053| 19657| Washer 4 for 44007| R6003| 17465|
Ball 4.76 for 44007| S3015
65206| Parafet for 44007| P1190| 19661| Washer 8 for 44007| R6030| 65243|
Slide Mov Paral.Externo for 44007| S3831
65207| Paragrasso for 44007| P1376| 17454| Washer for 44007| R6204| 65244|
Sled Ass. for 44007| S3898
65208| External Paralam Pul-Anod for 44007| P1721| 64374| Rondella Tazza
16.3×31.5×0.8 for 44007| R6225| 65245| Spherical Joint Rad.GE10E 10x19x9 for
44007| S4504
16959| Pin Grinding for 44007| P3225| 64375| Rondella Ondulata 10.5×15.8×0.15
for 44007| R6282| 65658| Flywheel Shoulder for 44007| S5227
17419| Pin Truing for 44007| P322601| 65231| Wavy Washer 12.5x25x0.3 for
44007| R6290| 64379| Spina Pivot Blocco Lame MT55 INOX for 44007| S7417
65209| Spindle Lever Flat Advance S37 for 44007| P3237| 64376| Washer U6593 5
(5,5x15x1,2)Inox for 44007| R650715| 36921| Stainless Steel 4×7 Pin M.C for
44007| S7527
17427| Assy Grinding Stone & Pin for 44007| P3381| 36882| Washer U6592 5
Stainless Steel for 44007| R6508X| 64380| Spina Mecc.Elast. U6873 6×40 for
44007| S7548
65211| Transmission Pin Couple Cone for 44007| P3743| 17457| Washer U6592 6
Stainless Steel for 44007| R6512X| 64381| Spina 5×10 Inox Supp. Affila.G35/37N
for 44007| S7646
65212| Sharpening Pin for 44007| P3744| 36884| Washer U6592 8 Stainless Steel
for 44007| R6520X| 64382| Spina Centraggio Plate S9M-1 for 44007| S7672
65213| Spindle Scroll.Select for 44007| P3747| 36885| Washer U6592 10
Stainless Steel for 44007| R6530X| 64383| Stainless Steel Pin 6×10 ZIG. for
44007| S7678
Model MS-IT-0319-M 44007
Item No.| Description| Position| Item No.|
Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
65247| Plug Fix.External Panel S9M-1 for 44007| S7681| 37023| Screw STEI U5929
M5x5 for 44007| V6065| 17497| Screw TSP U6109 M5x15 Stainless Steel for 44007|
V7014X
65248| Central Plug Sharpening for 44007| S7686| 19691| Grub Screw M6x6 for
44007| V6066| 64398| Screw TSP DIN 963 M6x16 Stainless for 44007| V7016X
65249| Conical Plug Ø6×70 for 44007| S7687| 19692| Screw M6x8 for 44007|
V6067| 64399| Screw TSP U6109 M6x20 Inox for 44007| V701715
65661| Supp. Plate Port. Red for 44007| S9516R| 19693| Screw M6x5 for 44007|
V6068| 37079| Screw TSP U6190 M6x30 Stainless Steel for 44007| V7018X
65663| Arm Support 2 Columns for 44007| S9517| 64390| Vite STEI U5929 M6x25
Inox for 44007| V607115| 74418| Vite TSP U6109 M4x8 Inox for 44007| V703415
65255| Flat Support Pos. for 44007| S9521| 19694| Screw M8x10 for 44007|
V6075| 64400| Stainless Steel Screw TSPEI U5933 M6x15 for 44007| V704715
65256| Supp. Crem. Adv. Plate for 44007| S9526| 64391| Screw M10x25 U5923 for
44007| V6084| 65277| Screw TSPEI U5933 M10x25 Inox for 44007| V705915
19877| Rubber Cap for 44007| T1001| 65263| Screw STEI U5923 M8x10 for 44007|
V6089| 65278| Screw TSP U6109 M8x16 Inox for 44007| V707815
65257| Heyco DP-625 Plug Diam.16 for 44007| T1034| 37034| Stainless Steel
Screw M8x4 U5931 for 44007| V620615| 19713| Screw Sharpener for 44007| V7710
65258| Plate Autoad. 0-11 Advance. Plate for 44007| T1783| 64392| Screw TCEI
U5931 M5x12 Inox for 44007| V624315| 17503| Screw M5x13 for 44007| V7908
64384| Targhetta Royal Machines Mezzaluna for 44007| T1785| 77598| Stainless
Steel Screw TCEI U5931 M6x20 for 44007| V6245X| 19715| Screw Sharpener for
44007| V7910
64385| Targhetta Royal Machines Ø58 for 44007| T1786| 64393| Vite TCEI U5931
M6x30 Inox for 44007| V625015| 19717| Screw M6x50 for 44007| V7917
65259| Flat Flywheel Plate Ø126.5 for 44007| T1787| 64394| Screw TCEI U5931
M8x35 for 44007| V6255| 19720| Screw M6 for 44007| V7934
65260| Rounded Flywheel Plate Ø57.5 for 44007| T1788| 64395| Vite TBTC U6954
4.8×19 for 44007| V6302| 64401| Screw M6x10 Registro for 44007| V7944
65261| Plate Vol.Sagomata 2Col for 44007| T1792| 64396| Screw TBTC AUT.U6954
2,2×9,5 for 44007| V6312| 37095| Screw for Rod 6×13 for 44007| V7993A
64386| Screw STTC U6113 M5x12 for 44007| V6002| 37055| Stainless Steel Screw M
5×8 U5931 for 44007| V634015| 65664| Screw M8x35 Inox for 44007| V8019
37016| Screw STTC U6113 M4x25 for 44007| V6008| 65264| Screw TCEI U5931
M12x100 for 44007| V6348| 37103| Screw M5x15 for 44007| V8038
26127| Stud C Model for 44007| V602115| 65265| Screw TCEI U5931 M4x10 for
44007| V6355| 37104| Threaded Stud for 44007| V8042
64387| Stainless Steel Screw M8x30 U5923 for 44007| V602215| 37060| Stainless
Steel Screw TE U5737 M5x12 for 44007| V6403X| 37106| Stainless Steel Switch
Screw M5x10 for 44007| V8048
37021| Screw for 44007| V6030| 37062| Screw TE U5739 M10x25 Stainless Steel
for 44007| V6413X| 37112| Stainless Steel Screw M8x4 for 44007| V8085
64388| Screw STEI U5923 M6x16 for 44007| V6031| 65276| Screw for Ends S9M-1
for 44007| V642216| 37114| Stainless Steel Screw M6x25 for 44007| V8130
64389| Screw STEI U5929 M4x5 for 44007| V6062| 37070| Screw TE U5739 M6x20
Stainless Steel for 44007| V6449X| 65269| Flywheel Red for 44007| V8510R
65262| Screw STEI U5929 M5x14 for 44007| V6063| 37073| Screw TE U5739 M8x25
Stainless Steel for 44007| V6461X| | |
65275| Screw STEI U5929 M5x14 Inox for 44007| V606315| 64397| Stainless Steel
Screw TSP U6109 M4x12 for 44007| V700815| | |
Notes
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting:
https://omcan.com/warranty-registration/
For mailing in Canada
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
|
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
---|---
or email to: service@omcan.com
Purchaser’s Information
Name: __
Address:
City: __ Country: __
Province or State: Postal or Zip: __
Dealer from which Purchased: ___
Dealer City: ____ Dealer Province or State: _
Invoice: ___
Model Name: __ ___ Model Number: ____
Machine Description: ____
Date of Purchase (MM/DD/YYYY): ____
Would you like to extend the warranty? Yes No
Company Name: ____
Telephone: ____Email Address: _
Type of Company: ___
Restaurant Bakery Deli
Butcher Supermarket Caterer
Institution (specify):
Other (specify):
Serial Number: __
Date of Installation (MM/DD/YYYY): ___
Thank you for choosing Omcan
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 6,500 globally sourced products.
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: service@omcan.com
www.omcan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>