XPR-PROX-USB RFID Desktop Reader User Manual
- June 12, 2024
- xpr
Table of Contents
XPR-PROX-USB RFID Desktop Reader User Manual
Overview
SPECIFICATIONS
- Technology: RFID (125 KHZ, 13.5 MHz)
- Interface: USB
- Supported credentials: EM4100 or HID PROX Compatible, NTAG,
- Mifare (Classic, Desfire, Plus, Ultralight)
- Card encryption: Mifare Classic, Desfire EV1, EV2, EV3
- Driver: Not required
- Firmware upgrade: Yes
- Compatibility: Windows 7, 8, 10, 11
- Power supply: 5 VDC (USB), 150 mA
- Sound Indicator: Internal buzzer
- LED Indicators: Red, Green
- Housing: Black ABS
- Environmental rating: Indoor
- Operating temperature: +5°C to +40°C
- Operating humidity: 5% – 95% relative humidity, non-condensing
- Dimensions (mm): 51 x 92 x 27
There is no need to install driver for this reader. Windows will detect it as a HID Compatible Device.
PROX-USB reader is compatible with following software:
- PROS CS
- Bio Manager
- PROA MS
- PROH MS
- XPR Toolbox
- XPR Smart Admin
- Device Manager
- XPR Card encoder
- Key Manage
The latest firmware version can be uploaded to the PROX-USB using XPR
Toolbox software from http://software.xprgroup.com/
This product herewith complies with requirements of EMC directive 2014/30/EU, Radio Equipment Directive 2014/53/EU. In addition it complies with RoHS2 directive EN50581:2012 and RoHS3 Directive 2015/863/EU.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>