PAPERANG P2 57mm Printing Pager Thermal Printer User Manual

PAPERANG P2 57mm Printing Pager Thermal Printer

Product Introduction| Packing list

1. preparing printer
2. thermal paper
3. charging cable
4. manual

Product Introduction | Product Information

1. power key
2. reset key
3. micro USB

SPECIFICATION

• product name: thermal print
• product model:p2z1
• input:5v1A
• charging interface:micro USB

Product Introduction| App Download

Install Paperang App on Your Mobile Device

Product Introduction | Instructions

Turn On/Off

• Press and hold the power key for 3 seconds
• Tun on when the light comes on
• Press and hold the power key again for 3 seconds
• Turn off when the light goes off

Satety and Attention

Battery overheating
Battery management and precautions

• When charging is cornplete, we suggest unplugging the charging catle.
• To avoid the risk of fre, please do not charge in high temperature environments (such as steam rooms, near a camphre, etc.).

Attention when using Charger

• Print hond managomont ond procautions
• The print head may be damageci hy improper charging
• We recommend not to use the machine in high humidity or dusty environments

Damage to charging port

• Precautions during charging
• Pease gently insert or pull out USB cable to prevent damage to the charging port

FCC COMPLIANCE STATEMENT:

This device complies with port ‘5 o the rCC Rules. Ope atiorn is subject to the following two coriditiorsThis device mey not ceuse hamfu interference, and this dovico m.ust accopt any rtortoronco ronaivod, includi n9 ir preference lhal may cause undesired operalion.
Note: This equipmant has baen tastad and found to comply with the limits for a Chss B digital device, pursuant to Part 15 u tre FCC Rules. Tese lrnits are desigied tu provide reasonable protection against harmful inter”erence in a residential installation. Ihis cquipment genoratos, uss and can rodiate radio frequency energy and, it nat installed aro used ‘r accordance with the instructions, may cause ham ‘ul interference to rzcio communication. However, hhere is ro guarsritee that irterferer ce will nxot uccur in a particular installation. If this equipmen: does cause harmful inteference to recio or television reception, which can ho docormincd by turning tho og.ipmont ott and on, tho usor is
encouragec to Iry to correct the iner lerence by one or more of he following reassures:

• Reorierit or rdocate the receiving arterr.
• Increase the separation between the equipment and recelver
• Connoct the cquipmont into ar outlet on a ircuit ditteront tram that to which the receiver is connected.
• Consult he deoler or on experienced radio/TV technicign for help.
  Warning: Change or modifications to this unit iot expressly approved by tre part responsible for compliance coui void the user’s autror ity to operate the equipment.

FCC Radiation Exposure Statement
The device has been evelualed to mee. general RF exposure requirem en. The device con be used in portable Bxposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>