BECEN BC-4000RGB 4W Full Color Animation Laser Light User Manual

Full-Color Animation Laser Light
User Manual

Please read this user manual carefully before use.

Dear User,
This product combines many advanced technologies like optics, electronics, and digital graphic processing into one, especially suitable for dancing halls and DISCO. It can operate built-in beam effects according to music, and with smoke, it can create a light-curtain wall and time-tunnel effects; it can build a romantic colorful laser would.
Attentions:
The perfect working temperature of the laser is: 20 ~ 35ºC.
Don’t illuminate to eyes directly to avoid eye hurt.
Don’t use is beyond the voltage AC110V240V and make sure it’s grounded safely.
Don’t turn on and turn off frequently to avoid affecting the working lifespan of the laser.
Please avoid starting it for a long time based on an all-solid-state laser; Please turn off the light for 15minutes after 3-hour continuous work. You can turn on it after it’s completely cooled.
Don’t touch the lens in the projection window to avoid any effects of the operation.
Please ask the professional repairing person to repair when in faults. Don’t open the laser on yourself.
Attention: Man-made damage or tearing out warranty labels is beyond warranty. Please read warranty details carefully.

Operation panel

MENU: Mode selection
UP & DOWN : modify parameters
ENTER: Determine

1. Display and the corresponding functions:

to enter or exit sound control, But in remote, you should press the SOUND button.)
R 1 + INDR + DMX| Simple DMX mode, the 1 after R is address code 1, it can be 1-512
R 1 + DMX| Standard DMX mode, the 1 after R is address code 1, it can be 1-512
SE- 1 +SET + SEL| The 1 after SE is the folder serial number, it can be 1-9( In mixed display mode, long-press the button MODE to enter, and press the buttons +.- to revise parameters; press the CERTAIN button to select or not. Long press the button MODE to save &exit.)
dr- II + SET| Press the button CERTAIN to revise X phase
dr- = + SET| Press the button CERTAIN to revise the Y phase
dr- =11 + SET| Press the button CERTAIN to revise the X phase and Y phase both.
II100 + SET| The 100 after ‘II’ means graph’s size, it can be 10-100. Press the CERTAIN button and the SEL lights on; press UP or DOWN to change X direction and its size’ after the change, please press the CERTAIN button, and then tum off the SEL light and save it.
= 100 + SET| The 100 after ‘ .’ means graphs’ size, it can be 10-100. Press the CERTAIN button and SEL
| | lights on, press UP or DOWN to change Y direction and its size; after the change, please press the CERTAIN button, and then turn off the SEL light and save it.
---|---|---
Roff| + SET| It means whether close remote control function when SEL lights on, long-press the button MODE to exit; and it close remote control function. Otherwise remote control function opens.
oR du| | Test function

Attention: In the SET mode, when increase or decrease to a certain folder, the SEL lights on, it means the effects in the folder can be transferred in AUTO or Sound control mode; If the SEL does not light on, the effects can not be transferred.

S – 11
Vs-2000
Vs-4000| Power:
Power:
Power:| Green150mw(532nm) Green500mw(520nm) Green1000mw(520nm)| Red 500mw(650nm) Red 500mw(650nm) Red 1000mw(650nm)| Blue 400mw(450nm)
Blue1000mw(450nm)
Blue2000mw(450nm)
---|---|---|---|---

Play system: DMX512, Sound control, AUTO
Control system: High-speed scanner, scanning angle±20°
Effects: Beams, complicated graphs, animation
Programming: It can program beams, animations
Interface: RJ45 interface (DMX512)
Power supply: AC 110/220V 50/60HZ

Simple DMX mode

CH1
Turn on &off laser| 0| close
1-255| open
CH2| 0-127| AUTO
Sound control| 128-255| Sound control
---|---|---
CI-13
graphs selection| 0-15| No. 1 graphs library
16-31| No.2 graphs library
32-47| No.3 graphs library
48-63| No.4 graphs library
64-79| No.5 graphs library
80-95| No.6 graphs library
96-111| No.7 graphs library
112-127| No.8 graphs library
128-143| No.9 graphs library
144-159| No.10 graphs library
160-175| No.11 graphs library
176-191| No.12 graphs library
192-207| No.13 graphs library
208-223| No.14 graphs library
224-239| No.15 graphs library
240-255| No.0 graphs library
CH4
scene selection| 0-255| Each value corresponds to one graph; if the value is beyond the graphs’ quantity, the system uses the max. the graph to replace.
CI-15
Color selection| 0-31| color
32-63| red
64-95| yellow
96-127| green
128-159| Indigo
160-191| blue
191-223| purple
224-255| white
CH6| 0| Default speed
1-255| From slow to fast

Professional DMX512 MODE Channel Form1

CH1
Turn on &off the laser| 0| All close
1-99| AUTO
100-199| Sound control
200-254| hold
255| Graph A close, Graph B can light
CH2
Graph outside & size| 0-49| Outside pass
50-99| Outside reentry
100-149| Outside disappear
150-199| Graph enlarge, outside disappear
200-255| hold
CH3
Graph selection| 0-15| No. 1 graphs library
16-31| No. 2 graphs library
32-47| No. 3 graphs library
48-63| No. 4 graphs library
64-79| No. 5 graphs library
80-95| No. 6 graphs library
96-111| No. 7 graphs library
112-127| No. 8 graphs library
128-143| No. 9 graphs library
144-159| No. 10 graphs library
160-175| No. 11 graphs library
176-191| No. 12 graphs library
192-207| No. 13 graphs library
| 208-223| No. 14 graphs library
---|---|---
224-239| No. 1 5graphs Wary
240-255| No. 0 graphs library
CH4
Graphs selection| 0-255| Each value corresponds to one graph: if the value is beyond graphs” quantity the system uses the max. the graph to replace.
CHS
Graphs zoom| 0| No zoom
1-31| Zoom effect 1
32433| Zoom effect 2
84-95| Zoom effect 3
98-127| Zoom effect 4
128-159| Zoom effect 5
180-191| Zoom effect 6
192-223| Zoom effect 7
224-255| Zoom effect 8
CH6
Graphs rotation| 63| Manual-operate rotation
84-95| Rotation effect 1
96-127| Rotation effect 2
128-159| Rotation effect 3
160-191| Rotation effect 4
192-223| Rotation effect 5
224-255| Rotation effect 6
CH7
Horizontal movement| 43| Manual-operate graph horizontal move
84-95| horizontal Move effect 1
96-127| horizontal Move effect 2
128-159| horizontal Move effect 3
180-191| horizontal Move effect 4
192-223| horizontal Move effect 5
224-255| horizontal Move effect 8
CH8
Vertical movement| 43| Manual-operate graph vertical move
84-95| vertical move 1
96-127| vertical move 2
128-159| vertical move 3
160-191| vertical move 4
192-223| vertical move 5
224-255| vertical move 8
CH9
Horizontal zoom| 43| Manual-operate X zoom
134-95| X zoom effect 1
96-127| X zoom effect 2
128-159| X zoom effect 3
180-191| X zoom effect 4
192-223| X zoom effect 5
224-255| X zoom effect 6
CHIO Vertical zoom| 43| zoom
Manual-operate V
84-95| Y zoom 1
98-127| Y zoom 2
128-159| Y zoom 3
180-191| Y zoom 4
192-223| Y zoom 5
224.| Y zoom 6
CH11
Forced
segmentation e9 color| 0| GRAPH ORIGINAL COLOR
---|---|---
1-255| SEGMENT COLOR LENGTH
CH12
Great, color change| 0-7| Original color (default)
8-15| red
16-23| yellow
24-31| green
32-39| indigo
40-47| blue
48-55| gut*
56-63| white
64-95| Graph red/green/blue change
96-127| Graph indigo/blue/purple change
128-159| Seven colors changes
160-191| Seven colors change
192-223| Positive cursory color
224-255| Negative cursory color
CH13 Joint&break point control| 0-63| Normal stroke
64-127| Graphs no stroke. retrace line stroke: the bigger the value is. the higher the joint brightness is.
128-159| Graphs no stroke. retrace IS no stroke: the bigger the value is. the higher the joint brightness is.
160-255| hold
CH14| Need to work with CH15
0-255| Manual drawing (when CH15 is 0-63)
0-255| The time it can hold for graph dynamics drawing lay-out ( when CH 15 is 64-127 or 160-191.)
0-255| The joint quantity of cursory drawing ( when CH15 is 192-255)
CH15
Drawing control| CH 15 needs 10 work with CH 14
0-31| Positive manual drawing
32-63| Negative manual drawing
64-95| Extended drawing
96-127| Zoom drawing
128-159| Zoom drawing in two sides at the same time
160-191| Zoom drawing in the ‘tat and in the end separate:e. ,
192-223| Cursory drawing
224-255|
CH 16
Distortion effect auxiliary| 0-255| The bigger the value is. the snigger the distortion is.
Mention: In zoom. rotation. move or roll distortion effects. CH16 can control the distortion range for the above distortion effects.
CH17
grating selection| NO use
0-51| No grating
52-102| Baby’s breath grating
103-153| One-dimensional grating
154-204| 3D face grating
205-255| 3Dline grating

Form 2: CH18-Ch34, the channel function of graph B, these 17 channels can only control Graph B, except any special stated. Graph A can not be controlled by these:
Attention: For easy check, we mark it in Gray, which is different from Graph A.

CH18
Turn on &off
laser| 0| close
---|---|---
1-99| AUTO
100-199| Sound control
200-254| hold
255| Graph A close. graph B lights on
CH19
Graph outside & size| 0-49| Outside pass
50-99| Outside retrace
100-149| Outside disappear
150-255| hold
CH20
the distribution
angle of each
element of the
array| ( c)
0-99| The smaller the segment is, the bigger the angle distribution gap of each unit is,
100-199| The smaller the segment is, the bigger the angle distribution gap of each unit is,
200-255| hold
CH21| 0-255| Each value corresponds to one graph: if the value is beyond graphs’ quantity,
CH22 graph zoom| 0| No zoom
1-31| Zoom effect 1
32-63| Zoom effect 2
64-95| Zoom effect 3
96-127| Zoom effect 4
128-159| Zoom effect 5
160-191| Zoom effect 6
192-223| Zoom effect 7
224-255| Zoom effect 8
CH23
graph rotation| 0-63| Manual graph rotation
64-95| Rotation effect 1
96-127| Rotation effect 2
128-159| Rotation effect 3
160-191| Rotation effect 4
192-223| Rotation effect 5
224-255| Rotation effect 6
CH25| 0-63| Manual graph vertical move
---|---|---
64-95| vertical move 1
96-127| vertical move 2
128-159| vertical move 3
160-191| vertical move 4
192-223| vertical move 5
224-255| vertical move 6
CH26| 0-63| Manual X zoom
64-95| X zoom 1
96-127| X zoom 2
128-159| X zoom 3
160-191| X zoom 4
192-223| X zoom 5
224-255| X zoom 6
0| 0-63| Manual Y zoom
64-95| Y zoom 1
CH27 vertical zoom| 96-127| Y zoom 2
---|---|---
128-159| Y zoom 3
160-191| Y zoom 4
192-223| Y zoom 5
224-255| Y zoom 6
CH28 Forced| 0| Default color
1-255| The segment color length
CH29 graphs color change| 0-7| Original color (default)
15-Aug| red
16-23| yellow
24-31| green
32-39| indigo
40-47| blue
48-55| purple
56-63| white
64-95| The graph red/green/blue color change
96-127| The graph indigo/blue/purple color change
128-159| Seven color change
160-191| Seven color change
192-223| Positive cursory color
224-255| Negative cursory color
(the red part means it’s a different channel function from Graph A.)
CH30 Joint&break point control| 0-63| Normal stroke
64-127| Graphs no stroke, retrace line stroke
128-159| Graphs no stroke, retrace line no stroke;
160-191| Graph A array-based on Graph B, the color can be set like Graph A
192-255| Graph A array-based on Graph B, the color can be set like Graph B joint color
Attention: the bigger the value is, the higher the joint brightness is.
CH31 drawing control auxiliary| Needs to work with CH32
Manual drawing when CH32 is 0-63.
The graph dynamics drawing layout holding time when CH32 is 64-127 or 160-191
Cursory drawing joint quantity when CH32 is 192-255
Needs to work with CH31
CH32 Drawing control| 0-31| Positive manual drawing
32-63| Negative manual drawing
64-95| Enlarge drawing
96-127| Zoom drawing
128-159| Zoom drawing in both sides at the same time
160-191| Zoom drawing at the start and in the end separately
192-223| Cursory drawing
224-255| Turn-around cursory drawing
CH33 Distortion control| 0-255| The bigger the value is, the smaller the distortion is.
Attention: When in the zoom, rotation, movement, and rolling distortion effect, CH16 can control
(the red part means it’s a different channel function from Graph A.)
CH34 projection extent control| 0-255| In each segment, the bigger the value is, the smaller the projection extent.
20-39
…….
220-239
240-255

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>