CREATE Aroma Ceramic Diffuser User Manual
- June 5, 2024
- CREATE
Table of Contents
CREATE Aroma Ceramic Diffuser
SECURITY INSTRUCTIONS
Read the following instruction carefully before using the appliance for the first time.
- Only use the power cord that is supplied with the unit.
- Always remove the power cord before cleaning.
- An essential oil should not come in contact with the exterior surface of the unit. Use only 100% pure essential oil. Do not use fragrance oils.
- To clean the aroma diffuser, first remove the top cover.
- Ory with a soft cloth to avoid mineral buildup.
- Do not use strong detergents.
DESCRIPTION
- It utiUzes ultrasonic vibration to transform water into mist Essential oil could be applied to create fragrance, and it has some humidification effect.
- Water shortage protection: With water shortage detector, when being in operation, it will automaticlly power off ff waterless, which can protect the atomizer from being burnt and broken.
- OV..rheatlng protection: The machine will automatically power off It abnormal overÂheating. Such function could avoid shell deformation caused by high temperature.
PARTS LIST
- Ceramic cover
- Drain side
- Ceramic disc
- Light button
- water tank
- Max water level
- Air outlet
- Power button
- Air inlet
- DC plug
- Cleaning brush
- Power adaptor
OPERATING INSTRUCTIONS
- Open the top cover.
- Avoid essential oil or acetone chemicals dropping on the cover surface because the painting can peel off.
- Add around 130 ml tap water Inside the water tank.
- Do not exceed the max water line when filling water inside, two or three drops of essential oil is enough for 130 ml water.
- Close the top cover.
- Insert the adaptor plug Into a household power socket. Light button usage:
- 1st pressing: Light is on at 100% intensity.
- 2nd pressing: Light is on at 20% intensity.
- 3rd pressing: Candle Light mode is on.
- 4th pressing: Light Is off.
- When the ught is on, long-press the light button to control the intensity. It can be adjusted from 100% to 30% intensity. Once the button is loosened, the light intensity is locked.
- Power button usage 1st pressing: Continuous mist is on. 2nd pressing: Intermittent mist is on in 15 seconds intervals. 3rd pressing: Mist is off. When the unit is on, long-press the power button to turn off the unit completely.
TROUBLESHOOTING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>