BenQ EX2710Q Mobiuz Gaming 1ms IPS 27 Inch QHD 165Hz LCD Monitor User Manual
- June 5, 2024
- BenQ
Table of Contents
LCD Monitor
Display QuicKit
User Manual
Firmware update utility
V 1.01
Copyright and disclaimer
Copyright
Copyright 2022 BenQ Corporation. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise, without the prior written permission of BenQ Corporation.
All other logos, products, or company names mentioned in this manual may be
the registered trademarks or copyrights of their respective companies and are
used for informational purposes only.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability, or fitness for any particular purpose. Further,
BenQ Corporation reserves the right to revise this publication and to make
changes from time to time in the contents hereof without the obligation of
BenQ Corporation to notify any person of such revision or changes.
This document aims to provide the most updated and accurate information to
customers, and thus all contents may be modified from time to time without
prior notice. Please contact customer service for the latest version of this
document.
It is the sole responsibility of the user if problems (such as data loss and
system failure) occurred due to non-factory installed software, parts, and/or
non-original accessories.
Servicing
Should you have any queries about the software after reading the document, contact customer support.
Typographics
| Icon / Symbol | Item | Meaning |
|---|---|---|
| Warning | Information mainly to prevent the damage to components, data, or |
personal injury caused by misuse and improper operation or behavior.
| Tip| Useful information for completing a task.
| Note| Supplementary information.
Introduction
Display quick is a software utility that helps to update the BenQ monitor’s
firmware easily. An updated firmware helps to improve a monitor’s stability
and compatibility, though it erases all the customized settings and resets the
monitor.
Note that not all BenQ monitors work with this software utility. It checks the
compatibility of your monitor automatically once launched.
Warnings
When performing the firmware updates, pay attention to the following:
- Always use the utility provided by BenQ and follow the procedures described in this document to complete the firmware update.
- Keep a stable power supply to the product until the update is complete. Do not remove the power adapter (if supplied) or disconnect the power cord and the cables.
- Do not power off the monitor.
- Connect only one video source to the monitor. See “Connections” on 4 for the connections.
- You can update the firmware of one monitor at a time. If you have multiple monitors connected to your computer, keep one monitor and disconnect the others first. Take turns until all monitors are updated.
Failure to follow these warnings will result in firmware update failure and possible damage to the product.
System requirements
- Windows 10 32/64 bit
- Windows 11
Connections
Available video input ports vary by model. To perform a firmware update, connect your monitor to a computer as instructed below.
- If your video source is DP or HDMI, connect a USB type A to type B cable to your monitor and the computer.
- If your video source is USB-C™ or Thunderbolt 3, no other USB connection between your monitor and the computer is required.
Updating the monitor firmware
-
Before you start, disable the power-saving function of your computer and the monitor. And keep only one monitor connected to your computer.
-
Download Display QuicKit from the BenQ website. Keep your computer connected to the Internet during the firmware update process, as the computer needs to access the firmware files on the BenQ cloud server.
-
Unzip the downloaded file and double-click the Display QuicKit.exe file. Once the software utility is installed, you can double-click the icon from your computer desktop to launch the utility again.
-
The utility checks if there is an update. You are recommended to update the utility to the latest version.
-
The utility then checks the compatibility of your monitor. If your monitor is supported, the screen shows the monitor model and its current firmware version. If you are requested to change the server location, select one from the drop-down list, or contact customer service for more information.
-
The utility checks if a new firmware version is available. Read the on-screen messages and proceed by clicking Update.
-
A progress bar is displayed. It takes about 10 minutes to complete the update.
-
Once the firmware update is complete, follow the on-screen instructions to reboot your monitor.
