BenQ JVPU2-D Wireless Mouse User Guide
- May 15, 2024
- BenQ
Table of Contents
BenQ JVPU2-D Wireless Mouse
Package contents
Top view Bottom view
Report rate switch button (0) DPI switch button (6)
Wireless operation (via Enhanced Wireless Receiver)
Wired operation
Wireless operation (via USB Wireless Receiver)
Power LED indicators
**Powering off (for power saving)
**
Product support
zowie.bena.com > Support > DOWNLOAD & FAO
Rating information
- Mouse (U2): 5V = 500mA
- Enhanced Wireless Receiver (ER-81): 5V = 500mA
- USB Wireless Receiver (RX-80): 5V == 100mA
- Battery: 3.7V == 300mAh
- (U2) : 5V = 500mA
- USB ARIZ4XER (RX-80) : 5V = 100mA
- Et : 3.7V = 300mAh
E-Waste Declaration for India
This symbol on the product or its packaging indicates that this product must
not se disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about E-waste and the places to drop off
your waste equipment for recycling in India please visit https://www.benq.com
/en-us/support/recycling/global-recycle.html.
Specifications
- No driver is needed.
- Wireless: 2.4G RF
- Wired: USB (Auto switch to wired mode when USB cable is connected)
- DPI (Dots per inch) settings: 400/800/1000/1200/1600/3200 dpi
- Adjustable USB report rate: 125/500/1000 Hz
- Connector: USB type-A on a PC; USB type-C on a device
- Buttons: 7 buttons
- Switch:1 (switch for power off and two receivers)
- Cable: USB type-A to USB type-C (2 meters/6.6 feet)
- Battery charging: approximately 2 hours
Changing DPI setting
Press the DPI switch (labelled 6) to switch to the desired DPI setting.
Adjusting USB report rate
Press the report rate switch (labelled) to switch to the desired report rate
setting.
Changing the Lift Off Distance (LOD) of your mouse
You might want to change the LOD to work with your mouse pad properly.
Wireless mode: Power off the mouse first. Press and hold the following
combination keys together and power on the mouse at the same time. Wired mode:
Power off and disconnect the mouse first. Press and hold the following
combination keys together and re-connect the mouse at the same time.
- For a lower LOD: buttons + 0
- For a medium LOD: buttons 6 + 0
- For a higher LOD: buttons + 0 + 2
Changing click response time
You can change the click response time as desired.
Wireless mode: Power off the mouse first. Press and hold the following key and
power on the mouse at the same time.
Wired mode: Power off and disconnect the mouse first. Press and hold the
following key and re-connect the mouse at the same time.
- Fast response time: 4
- Normal response time: 5
- Enabling Motion Sync
- Motion Sync on 4 + 3
- Motion Sync off: 5 + 3
- LED indicator on Enhanced Wireless Receiver
- Solid white: In sleep mode
- Dim white: In normal operation
- Flashing amber: Weak signal.
- Move the mouse within the effective range to improve signal strength.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>