DAEWOO 32DE04HL 32 Inch HD Ready LED User Manual

DAEWOO 32DE04HL 32 Inch HD Ready LED

Product Information

The product is a television set that is designed to be environment-friendly and energy efficient. It has various features such as Energy Saving settings, Backlight adjustment, and System>Picture menu. The TV set also contains Class II equipment and Class 1 laser source that is safe for users under normal operating conditions. The product comes with safety instructions and warnings that should be carefully followed.

Safety Information

• Do not open the TV set as it may cause electric shock. Refer servicing to qualified service personnel.
• Disconnect the TV set from the mains during extreme weather or long inactivity periods to avoid power consumption.
• Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
• Follow the on-screen instructions for operating the related features.
• Read the instructions fully before installing or operating the TV set.
• Do not mount the TV set on the wall without following the wall mounting warnings.

Environmental Information and Energy Saving Features

• The TV set is designed to be environment-friendly and energy efficient.
• The Energy Saving settings can be found in the System>Picture menu.
• To reduce energy consumption, set the Energy Saving to Minimum, Medium, Maximum, or Auto. If you like to set the Backlight to a fixed value, set it as Custom and adjust the Backlight manually using Left or Right buttons on the remote. Set as 0 to turn this setting off.
• Some picture settings will be unavailable to be changed when using the Energy Saving feature.
• If pressed Right button while Auto option is selected or Left button while Custom option is selected, the screen will be turned off in 15 seconds. Select Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be turned off in 15 seconds.

Product Usage Instructions

1. Read the instructions fully before installing or operating the TV set.
2. Follow the safety instructions and warnings provided in the user manual.
3. To avoid electric shock, do not open the TV set or remove its cover.
4. Disconnect the TV set from the mains during extreme weather or long inactivity periods to avoid power consumption.
5. Follow the on-screen instructions for operating the related features such as Energy Saving settings and Backlight adjustment.
6. If you want to use the Energy Saving feature, go to System>Picture menu and choose your preferred setting (Minimum, Medium, Maximum, or Auto). Adjust the Backlight manually if you want to set it as a fixed value.
7. Note that some picture settings will be unavailable to be changed when using the Energy Saving feature.
8. If you want to turn off the screen immediately, press the Right button while Auto option is selected or Left button while Custom option is selected. Choose Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be turned off in 15 seconds.
9. Do not mount the TV set on the wall without following the wall mounting warnings provided in the user manual.

ot place any heat sources such as electric
heaters, radiators, etc. near the TV set.
• Do not place the TV on the floor and inclined
surfaces.
• 7R DYRLG GDQJHU RI VXႇRFDWLRQ NHHS SODVWLF EDJV
out of the reach of the babies, children and domestic
animals.
• Carefully attach the stand to the TV. If the stand is
SURYLGHG ZLWK VFUHZVWLJKWHQWKH VFUHZV ¿UPO\WR
prevent the TV from tilting. Do not over-tighten the
screws and mount the stand rubbers properly.
• Do not dispose of the batteries in fire or with
KD]DUGRXVRUÀDPPDEOHPDWHULDOV

Warning: Batteries must not be exposed to excessive
KHDWVXFKDVVXQVKLQH¿UHRUWKHOLNH
Caution Serious injury or death risk
Risk of electric shock Dangerous voltage risk
Maintenance
Important maintenance component
Markings on the Product
The following symbols are used on the product as a
marker for restrictions and precautions and safety
instructions. Each explanation shall be considered where the product bears related marking only. Note
such information for security reasons.
Class II Equipment: This appliance is
designed in such a way that it does not require a safety connection to electrical earth.
Class II Equipment With Functional
Earthing: This appliance is designed in such a way that it does not require a safety connection to electrical earth, the earth connection is used for functional purposes.
Protective Earth Connection: The marked terminal is intended for connection of the protective earthing conductor associated with
the supply wiring.
Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal
operating conditions.
Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.
Class 1 Laser Product:
This product contains
Class 1 laser source that is safe under reasonably\ foreseeable conditions of
her (storms, lightning) and long inactivity
periods (going on holiday) disconnect the TV set from the
mains.
The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standb features.
y
PRGHRUVZLWFKHGRႇ
IMPORTANT – Please read these
instructions fully before installing or

operating

WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised.

• Use this TV set at an altitude of less than 5000 meters\ above the sea level, in dry locations and in regions with moderate or tropical climates.

• The TV set is intended for household and similar indoor use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free space around the TV.
• The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
• The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord.
$GDPDJHGSRZHUFRUGSOXJFDQFDXVH¿UHRUJLYH
you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord.
Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this
VKRXOGRQO\EHGRQHE\TXDOL¿HGSHUVRQQHO
• Do not expose the TV to dripping or splashing of
OLTXLGVDQGGRQRWSODFHREMHFWV ¿OOHGZLWKOLTXLGV such as vases, cups, etc. on or over the TV (e.g., on shelves above the unit).
• Do not expose the TV to direct sunlight or do not SODFHRSHQÀDPHVVXFKDVOLWFDQGOHVRQWKHWRSRI or near the T

1. Standby: Switches 2Q2ႇWKH79
2. Numeric buttons: Switches the channel, enters a
number or a letter in the text box on the screen.
3. TV: Switches to TV Source
4. Mute:&RPSOHWHO\WXUQVRႇWKHYROXPHRIWKH79
Volume +/-
6. Menu: Displays TV menu
7. Directional buttons: Helps navigate menus, content
etc. and displays the subpages in TXT mode when
pressed Right or Left
8. OK: &RQ¿UPVXVHUVHOHFWLRQVKROGVWKHSDJHLQ7;7
mode), views channel list (DTV mode)
9. Back/Return: Returns to previous screen, opens index
page (in TXT mode)
10. Media browser: Opens the media browsing screen
11. Info: Displays information about on-screen content,
shows hidden information (reveal – in TXT mode)
12. My button 1 ()
13. Coloured Buttons: Follow the on-screen instructions
for coloured button functions
14. Language: Switches between sound modes (analogue
TV), displays and changes audio/subtitle language
(digital TV, where available)
Subtitles:7XUQVVXEWLWOHVRQDQGRႇZKHUHDYDLODEOH
16. Rapid reverse: Moves frames backwards in media
such as movies
17. No function
18. Play: Starts to play selected media
19. Stop: Stops the media being played
20. Rapid advance: Moves frames forward in media such
as movies
21. Pause: Pauses the media being played
22. Screen: Changes the aspect ratio of the screen
23. Text: Displays teletext (where available), press again
to superimpose the teletext over a normal broadcast
picture (mix)
24. My button 2 ()
EPG (Electronic programme guide): Displays the
electronic programme guide
26. Exit: Closes and exits from displayed menus or returns
to previous screen
27. Quick Menu: Displays a list of menus for quick access
28. No function
29. Programme +/-
30. Swap: Quickly cycles between previous and current
channels or sources
31. Source: Shows all available broadcast and content
sources oadcast search option is turned
on, the TV will search for digital satellite broadcasts
after other initial settings are completed. Before
satellite search is performed some settings should be
made. Before the satellite search starts, a menu will be
displayed where you can select to start an M7 operator
installation or a standard installation. To start an M7
operator installation set the Install Type as Operator
and the Satellite Operator as the related M7 operator.

Then highlight Preferred Scan option and set as
Automatic channel scan and press OK to start the
automatic search. These options can be preselected
depending on the Language and Country selections
WKDW \RX PDGH LQ WKH HDUOLHU VWHSV RI WKH ¿UVW WLPH
installation process. You may be asked to select HD/
SDRUFRXQWU\VSHFL¿FFKDQQHOOLVWDFFRUGLQJWR\RXU
M7 operator type. Select one and press OK to proceed.
:DLWWLOOWKH VFDQ LV ¿QLVKHG 1RZWKH OLVW KDV EHHQ
installed.

While performing an M7 operator installation, if you
want to use the satellite installation parameters that
GLႇHUIURPWKH GHIDXOW VHWWLQJV VHOHFWWKHPreferred
Scan option as Manual channel scan and press the
OK button to proceed. Antenna Type menu will be
displayed next.
In order to search for satellite channels other than
M7 channels you should start a standard installation.

Select the Install Type as Standard and press the
OK button to proceed. Antenna Type menu will be
displayed next.
There are three types of antenna selection. You can
select Antenna Type as Direct, Single Satellite Cable
or DiSEqC switch by using “ ” or “ ” buttons.
• Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. Press OK to
FRQWඈQXHSelect an available satellite on the next
screen and press OK to scan for services.
• Single Satellite Cable: If you have multiple
receivers and a single satellite cable system, select
this antenna type. Press OKWRFRQWLQXH&RQ¿JXUH
settings by following instructions on the next screen.
Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes
and a DiSEqC switch, select this antenna type. Then
set the DiSEqC version and press OKWRFRQWඈQXH
You can set up to four satellites (if available) for
version v1.0 and sixteen satellites for version v1.1
on the next screen. Press OKEXWWRQWRVFDQWKH¿UVW
satellite in the list.

Analogue: If Analogue broadcast search option is
turned on, the TV will search for analogue broadcasts
after other initial settings are completed.
Additionally you can set a broadcast type as your
favourite one. Priority will be given to the selected
broadcast ty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>