hp M139e-M142e series LaserJet MFP Printer User Guide
- June 4, 2024
- HP
Table of Contents
hp M139e-M142e series LaserJet MFP Printer
Control panel
Light patterns
Printer display codes
These codes may flash after initially turning on the printer. Complete setup using the HP Smart software to resolve them.
For a complete list of printer display codes and light patterns, refer to the user guide on: hp.com/support
Do not use USB for setup
Printers with a label covering the USB port must be set up with HP Smart and an Internet connection. After setup, you can print using a USB cable if needed, but the printer must also remain connected to the Internet. Remove the label to uncover the USB port when needed.
Help and tips for Wi-Fi and connectivity
If the software is unable to find your printer during setup, check the following conditions to resolve the issue.
Exclusive HP+ Support
- Get complimentary support by contacting our experts at this website.
- Support varies by country/region. Visit the website for more information.
The information contained herein is subject to change without notice.
® Copyright 2021 HP Development Company, L.P.
Printed in Vietnam
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>