BenQ GW2780 LCD Monitor Instruction Manual
- October 30, 2023
- BenQ
Table of Contents
BenQ GW2780 LCD Monitor
Product Information
The LCD Monitor Model No. GW2780, GW2780E, GW2780T, BL2780, and BL2780T contains hazardous substances such as Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority of these substances are present in the printed circuit boards assembly. To reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Product Usage Instructions
- Before disassembling, prepare the following tools: Philips Screwdriver for M3 Screw, Nosed Pliers, Diagonal Cutting Pliers, Slotted screwdriver, Six Point Sockets, Philips Screwdriver for M2.5 Screw, and Knife.
- Refer to the product exploded view and package view to identify the different parts of the monitor.
- To disassemble the monitor, follow these steps:
- Disassemble Stand
- Unscrew
- Disassemble RC
- Disassemble Internal
- Disassemble DECO
- Unscrew MF & PNL screw*9 pcs
- Disassemble MF & Panel
- Disassemble Control BD
- Disassemble Mylar & unscrew D-sub
- Disassemble PCBs
- Disassemble Lens and sensor BD
- Disassemble Column
- Disassemble Base
- Refer to the recycle characteristics table to identify which parts can be reused, recycled, and which parts require special recovery or disposal.
- The total disassembly time is approximately 30 minutes.
Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU on waste electrical and electronic equipment (WEEE)
Materials and components with hazardous content LCDs may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the printed circuit boards assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Product Name: LCD Monitor
Model No.: GW2780,GW2780E,GW2780T,BL2780,BL2780T
Disassembly Tools
Product exploded view
Package view
Disassembly process
- Disassemble Stand
- Unscrew
- Disassemble RC
- Disassemble Internal
- Disassemble DECO
- Unscrew MF & PNL screw*9 pcs
- Disassemble MF & Panel
- Disassemble Control BD
- Disassemble Mylar & unscrew D-sub
- Disassemble PCBs
- Disassemble Lens and sensor BD
- Disassemble Column
- Disassemble Base
Recycle characteristics
Disassembly Time
Total time: 30 minutes
References
- LCD Monitors, Projectors, Speakers and Lighting | BenQ US
- LCD Monitors, Projectors, Speakers and Lighting | BenQ US