DISPLAYS2GO PDC02 37 Inch Pedestal Digital Display Case User Manual

PDC02 37 Inch Pedestal Digital Display Case
User Manual

[This device complies with Part 15 of the FCC Rules. Operation s subject 1o the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Any changes/modifications to this equipment ot approved by George Potion| Associates court void the user’s authority to operate the equipment.

Model: PDC02
Description: 37-Inch Pedestal Digital Display
Case
USER MANUAL
Scan QR code to visit the product page:

Operating Instructions for Digital Signage

Note: Before using the product, please read the instructions carefully!
Do not attempt to disassemble this product. If the product does not work properly, please call our Customer Service Department at 1-844-221-3393.

Features

1. Embedded with Android 7.1 smart operating system and unique Ul design, bringing you a more convenient operation and better visual experience.
2. 5upports USB mouse and keyboard, allowing easy manipulation like a computer. Using a mouse for set up is recommended.
3. Built-in Wi-Fi module, high-capacity memory and high-capacity cache, making it smoother to watch 1080P HD movies and play big games.
4. High-quality LCD screen as the display, with no flicker, low radiation, greatly reducing eye fatigue, eye protection, high brightness, high contrast, and wide viewing angle; ultra-fast response time greatly reduces ghosting of fast moving images.
5. Progressive image processing and industry-leading motion compensation technology improve the flickering and blurring in the edges of motion picture.
6. Dynamic contrast technology can significantly improve the clarity and contrast of various screens.
7. Multi-channel USB interfaces, supporting HD media streaming.

Safety Warnings and Precautions

Thank you for purchasing the high-performance multi-functional LED backlight Digital Signage from Displays2Go. We have considered the factors to ensure personal safety in product design and have tested rigorously at the factory. However, improper installation and use may result in electric shock and fire.
In order to safely use, maximize performance of the unit and extend the life of the product, please read and follow all instructions carefully before using the product.
Keep the instructions for future reference.
We strongly recommend using a surge protector, or a power strip with internal circuit breaker to prevent damages to the digital signage.

Symbol Legends:

Warning: May cause personal injury or death
The operation is prohibited
Caution: May cause damage or property loss
The operation must be executed

If any of the following occurs:

• Power outage or instable voltage.
• Abnormal sound or smell from the unit.
• AC power cord is damaged.
• Digital Signage is damaged due to drop, knock or impact.
• Any liquid or foreign matters fall into the enclosure.

Turn off the Digital Signage immediately, pull out the plug from the power outlet, and ask the authorized personnel for maintenance timely.
If coal gas or other flammable gas leaks, do not pull out the plug of the LCD Digital Signage or other electrical appliances; instead, turn off the gas valve immediately, and open the doors and windows quickly.

WARNING

• Do not use power supply other than AC 110V, 60Hz.

• Cut off the power supply before connecting or disconnecting any cables.

• Do not place the Digital Signage on any instable positions, or else it may be damaged or cause fire.

• Do not place the Digital Signage in the positions such as:
  1. The environment subject to direct strong sunlight, moisture, extreme temperature or too much dust;
  2. The environment with flammable or explosive materials;
  3. The environment with flammable or corrosive gases;

• Do not use damaged or inappropriate power outlets, and ensure that the plugs and outlets contact properly.

• Do not let dust or metal deposits adhere to the plugs and outlets.

• Do not damage the power cords:
  1. Do not modify the power cords;
  2. Do not place heavy objects on the power cords;
  3. Keep the power cords away from heat source;
  4. Do not pull the cord to remove the plug.

• Do not connect too many plugs to one outlet in parallel, or else it may cause fire due to excessive power consumption.

• Do not approach the Digital Signage with open flame (e.g. a lighted candle), or else it may cause electric shock or fire.

• Do not put any sharp objects, metal or liquid into the vents or let them touch the signal terminals to avoid short circuit, product damage, and electric shock.

• The openings in the enclosure are designed for ventilation and cooling, to ensure long time reliable running of components inside the enclosure and prevent overheating. Do not block the openings when place  the unit.

• Do not touch the plugs with wet fingers, or else it will cause electric shock.

• Do not use the Digital Signage in stormy weather, especially when there is lightning; instead, please disconnect the power and antenna plugs to avoid lightning strike.

Assembly and Connection

Parts List

Description of Parts for Floor Standing Version

CAUTION: Disconnect the power plug before assembling or disassembling the unit!

Remote Control of the LCD Screen

Installing batteries for the remote control:
Remove the battery cover and insert two AAA batteries (1.5V). Ensure that the battery polarity matches the “+”/“-” marks in the battery compartment of the remote control
Precautions for using the remote control:

• Aim the remote control at the receiver window. Do not place any object between the remote control and the receiver window to avoid interference with the normal operation.
• Keep the remote control away from violent vibration. In addition, do not set or place the remote control in direct sunlight, or else the remote control may be deformed by heat.
• The remote control may be invalid when the receiver window of the unit is in direct sunlight or strong lighting; in this case, please adjust the angle of the lighting or the unit or approach the receiver window to  use it.
• The distance of remote control will be shortened if the battery voltage is insufficient; in this case, please replace with new batteries; if the remote control won’t be used for a long time or the batteries are run out,  please take out the batteries to avoid corrosion due to battery leakage, which will damage the remote control
• Do not use batteries of different types or mix new batteries with old ones. Always replace the batteries in pairs.
• Do not put the batteries in fire, or charge or disassemble them, or charge, short circuit, disassemble, heat or burn used batteries. Please dispose of waste batteries in accordance with local environmental  regulations. Do not expose the batteries in overheated environments such as sunlight and fire.

Description of remote control buttons:

Description of Basic Operation

Power on/Standby
Insert the power plug into the outlet. If the Digital Signage has the switch button “I, turn it on. In power on state, press the “ ” button on the remote control, and the Digital Signage enters standby state.
Interface and Home Screen
After power on, the machine will launch home screen, as shown below:

Description of Wallpaper Switch
We suggest using a mouse to change the wallpaper.
Connect a mouse with the digital panel through USB port, then follow the steps below:

1. Click “Setting”
2. Atthe setting menu, click “Display”
3. Atthe Display setting menu, click “Wallpaper”, then choose a folder.
4. Then select an image you would like to set up as background.
5. Confirm the selection by clicking “Set wallpaper”.

File Manager

1. Click the Main Apps button “ ” in the Home screen to enter the “APPS” menu interface (Fig. 1);
2. Click the “Explorer” icon in the “APPS” menu interface (Fig. 2) and enter “Explorer” menu (Fig. 3);
3. Choose storage in the “Explorer” menu to read the files from different devices.

Local Settings

1. Click the App Drawer icon “ ” in the Home page to enter the “APPS” menu interface (Fig. 1);
2. Click the “Settings” icon (Fig. 1) and enter “Settings” menu (Fig. 2);
3. Click “Wi-Fi” and choose options then set up the WIFI connection (Fig. 3).

Description of Settings Interface (shown on the right)

Status of Menu Bar

1. Click the setting (Fig.1)
2. At the setting menu click the display menu (Fig. 2);
3. At the display setting menu unselect the display navigation check box. (Fig.3)

DiViEx APP Introduction

System requirements:
Step 1: Before using the APP, make sure your device meets or exceeds the following system requirements:

How to upload media files:
Step 2: Plug in your USB drive to the computer. Open the drive in Windows Explorer and create a new folder, rename it “Media Folder”. As shown below:

Open “Media Folder”, create 3 subfolders, and change their names to “Images”, “Videos”, “Music”. Copy the media file to be displayed, image to “Images”, video to “Videos”, Music to “Music”

Step 3: Plug the USB drive into the device and click the DiViEx APP.

Step 4: When the screen shows “Copy finished” after “Usb Disk:”, the media files are ready to be displayed

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>