kogan KAHTCRMFANA 1500W Ceramic Fan Heater User Guide

: June 5, 2024
: Kogan

Table of Contents

kogan KAHTCRMFANA 1500W Ceramic Fan Heater
SAFETY & WARNINGS
OVERVIEW
OPERATION
CLEANING & CARE
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kogan KAHTCRMFANA 1500W Ceramic Fan Heater

SAFETY & WARNINGS

Ensure to read and follow all instructions and warnings in this user guide. Retain this user guide for future reference.

WARNING: A fire risk exists if the fan heater is covered by or positioned close to furniture, animals, curtains, or other combustible materials.

This fan heater is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the fan heater by a person responsible for their safety.
After disposing of the packaging, ensure the fan heater, power cord, and plug are in good condition. If damaged, do not use and contact help.Kogan.com for assistance.
This fan heater is intended for indoor household use only. Do not use the fan heater outdoors, or for commercial use.
Only use this fan heater as intended. Any other use may result in fires, electric shock, or injury.
This fan heater supports a voltage between 220–240V with a frequency of 50Hz. Ensure the socket used matches this.
Adult supervision is required when children are around the fan heater.
Do not allow children to play with the packaging.
Do not allow children to play with the fan heater.
Ensure the fan heater is placed on a flat, stable surface when in use.
WARNING: Do not cover the air inlet or air outlet when in use.
Do not place objects over the air inlet or air outlet as this may lead to overheating.
Keep at least a 1 metre clearance around all sides of the fan heater when in use.
Do not leave the fan heater unattended when in use.•
Do not use the fan heater directly below a socket.
Do not use the fan heater in areas where petrol, paint, or other flammable substances are used or stored.
WARNING: Do not use this fan heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless supervised.
Do not use the fan heater in areas commonly around water (for example, bathrooms, kitchens, laundries, swimming pools).
Do not expose or immerse the fan heater or power cord to rain, moisture, or any other liquid.
To avoid electric shock, do not touch the fan heater with wet hands.
If the power cord or plug is damaged, stop use immediately and contact help.Kogan.com for assistance.
If the fan heater malfunctions, is dropped or is otherwise damaged, stop use immediately and contact help.Kogan.com for assistance.
Do not attempt to disassemble or repair the fan heater yourself.
Ensure the power cord is fully extended and not in contact with any part of the fan heater before use.
Ensure the power cord is always visible. Do not place the power cord under carpet, throw rugs or furniture as this may lead to a tripping hazard.
Do not move the fan heater when in use.
During use, the fan heater will become very hot. If needing to move the fan heater, switch it off and use the handle.
After use, ensure the fan heater is turned off before unplugging the power cord.
Do not forcibly pull on the power cord when unplugging. Pull directly from the plug instead.
This fan heater is fitted with a fall protection switch. Do not use the fan heater on thick carpets as this may inhibit the fall protection switch to activate if the fan heater falls.•
Do not use third-party attachments or accessories with this fan heater as this may lead to injuries to the user and damage to the fan heater.
Do not connect power cords from other appliances into the adjacent socket (if using a double power point) as this may lead to overloading.
Do not use extension cords with this fan heater.
Ensure the fan heater is unplugged when not in use.

OVERVIEW

Front view
Back view
Control panel

OPERATION

Placement and powering on Ensure there is at least a 1 metre clearance around all sides of the fan heater. Ensure the socket that the power cord will be plugged into supports a voltage between 220–240V with a frequency of 50Hz.

Place the fan heater on a stable surface. Plug the power cord into the socket and switch the socket on.
Press the On/Off switch and you will hear a short beep. The fan heater will now be on standby and the power indicator on the control panel will illuminate. Press the power button ‘ ’ to turn on the fan heater. The fan indicator will illuminate, and the fan will begin operating.

Heating

Press the heat button ‘ ’ and the fan heater will start blowing heat at a low setting. The low heat indicator will also illuminate.
Press the heat button ‘ ’ again and the fan heater will start blowing heat at a high setting. The high heat indicator will also illuminate.

Temperature
If you wish the room to be a specific temperature, press the temperature button ‘ ’ to set the desired room temperature (15°C, 20°C, 25°C, 30°C, 35°C). The temperature indicators will illuminate accordingly. When the room reaches the desired temperature, the heating element will turn off (the fan will continue operating) and then automatically regulate the room temperature by turning itself on and off over time.

Note:
The heating element will not switch on if the desired room temperature is higher than the current room temperature (the fan will continue operating).

Timer
This fan heater features a timer function that can allow the fan heater to automatically turn off after 1–7 hours.
Press the timer button ‘ ’ until the illuminated timer indicator/s add up to the desired time (for example, if the 4hr and 1hr timer indicators are illuminated, the timer is set for 5 hours.)

Fall protection
This fan heater is protected with a safety switch that turns the fan heater’s heating off automatically if it falls over or is laying at an excessively horizontal angle. This assists in preventing the risk of fire, overheating, and other accidents. The fan will remain operating with the fan indicator flashing. If the safety switch is triggered, put the fan heater upright and press the power button ‘ ’ to reset the fan heater.

Overheating protection

This heater is protected with thermal cut off protection that switches the fan heater off automatically if it overheats for any reason (for example, something covering the air inlet or outlet).
Switch off the power at the socket and unplug the power cord. Remove any objects and ensure there are no obstructions within a 1 metre radius of the fan heater. Wait for the fan heater to cool. The thermal cut off will automatically reset.
Check for any damage to the fan heater, power cord, or plug. If there is no damage, plug the power cord back into the socket and switch the socket on. Resume normal use.

Note:
If the fan heater does not turn on, stop use immediately and contact help.Kogan.com for assistance.

Powering off
Press the power button ‘ ’. The fan will remain on with the fan indicator flashing for approximately 30 seconds to allow the fan heater to cool. The fan heater will then return to standby. Switch off the power at the socket.

CLEANING & CARE

Ensure the fan heater is turned off, unplugged, and cool before cleaning.

Clean the exterior with a lightly damp cloth, vacuum cleaner, or dusting brush.
Clean the air inlet and outlet regularly with a vacuum cleaner to remove any dust or debris. Build-up of dust and debris may lead to the fan heater overheating.
Notes:
Do not use flammable or abrasive cleaning agents (for example, benzene or spirits) to clean the fan heater.
Do not immerse the fan heater in water or any other liquid.

Storage
Store the fan heater in a clean, dry place away from sunlight.

SPECIFICATIONS

Voltage Frequency Output power (W)
220–240V AC
50Hz
1500W

Disposal

This marking indicates that this fan heater should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.