Merra HCF-0615-BK-BNHD-1 1-Light Dark Brown LED Wall Sconce Instructions
- October 30, 2023
- MERRA
Table of Contents
Merra HCF-0615-BK-BNHD-1 1-Light Dark Brown LED Wall Sconce
Product Information
The product is a lamp that needs to be installed on the wall. The product comes with a canopy, mounting bracket, mounting bolts, wire nuts, and canopy bolts. The product requires wiring in the wall and a junction box (not included) to be prepared before installation. The product can be dangerous if power is not disconnected before installation.
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Remove the canopy bolts (E) and take the mounting bracket (C) off the canopy (A).
- Connect the mounting bracket to your junction box using the mounting bolts (B).
- Make electrical connections using the wire nuts (D).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Restore the power and enjoy!
To avoid danger, disconnect power to the line until the lamp has been fully installed. For any questions or comments, contact the manufacturer at help @cs-supportpro.com. For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code provided in the manual.
INSTRUCTIONS
DANGER!
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Remove the canopy bolts (E) and take the mounting bracket (C) off the canopy (A).
- Connect the mounting bracket to your junction box using the mounting bolts (B).
- Make electrical connections using the wire nuts (D).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Restore the power and enjoy!
CONTACT US
Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>