infineon CY7112 EZ-PD PMG1-S2 MCU Prototyping Kit User Guide
- June 5, 2024
- infineon
Table of Contents
Infineon CY7112 EZ-PD PMG1-S2 MCU Prototyping Kit
Quick start guide
CY7112 EZ-PD™ PMG1-S2 MCU prototyping kit
The CY7112 EZ-PD™ PMG1-S2 MCU prototyping kit is a development platform to
design products that can be powered from a high-voltage USB PD port, and also
need a microcontroller to implement different applications. This platform is
compliant with the USB PD 3.0 protocol and can support up to 100 W (20 V, 5 A)
of power consumption.
Before you start
- Ensure that you have a USB PD 3.0-compliant USB-C power adapter (e.g., Apple 30 W USB-C power adapter) with a compatible USB PD 3.0-compliant Type-C cable.
- Download and unzip the CY7112 release package from the CY7112 web page (cypress.com/CY7112).
- Ensure that the jumper shunt on the power selection jumper (J5) is placed at positions 1–2 to select the USB-C power adapter as the power source for the CY7112 board.
Hardware connection
- Connect the USB PD sink port (J10) of the CY7112 board to the USB-C power adapter using the USB Type-C cable.
- Confirm that the power LED (LED4) glows green and the user LED (LED3) blinks green. Now, the kit is ready for use.
Evaluating the USB PD sink functionality
- Measure the DC_OUT voltage by connecting a multimeter to the terminal block (J9). Confirm that the DC_OUT voltage value is within the 4.75 V–21.00 V range. The actual value is determined by the maximum voltage which the USB-C power adapter can supply.
Remove the multimeter and connect an external load to the terminal block (J9). Next steps
See the CY7112 kit user guide (available as part of the CY7112 kit release package) to learn more about the features supported in the CY7112 hardware and how to develop applications using ModusToolbox™ software.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>