infineon CY7111 EZ-PD PMG1-S1 MCU Prototyping Kit User Guide
- June 5, 2024
- infineon
Table of Contents
Quick start guide
CY7111 EZ-PD™ PMG1-S1 MCU prototyping kit
The CY7111 EZ-PD™ PMG1-S1 MCU prototyping kit is a development platform to
design products that can be powered from a high-voltage USB PD port, and also
need a microcontroller to implement different applications. This platform is
compliant with the USB PD 3.0 protocol and can support up to 100 W (20 V, 5 A)
of power consumption.
https://www.cypress.com/CY7111
Before you start
- Ensure that you have a USB PD 3.0-compliant USB-C power adapter (e.g., Apple 30 W USB-C power adapter) with a compatible USB PD 3.0-compliant Type-C cable.
- Download and unzip the CY7111 release package from the CY7111 web page (cypress.com/CY7111).
- Ensure that the jumper shunt on the power selection jumper (J5) is placed at positions 1–2 to select the USB-C power adapter as the power source for the CY7111 board.
Step 1: Hardware connection
- Connect the USB PD sink port (J10) of the CY7111 board to the USB-C power adapter using the USB Type-C cable.
- Confirm that the power LED (LED4) glows green and the user LED (LED3) blinks green.
Now, the kit is ready for use.
Step 2: Evaluating the USB PD sink functionality
- Measure the DC_OUT voltage by connecting a multimeter to the terminal block (J9). Confirm that the DC_OUT voltage value is within the 4.75 V–21.00 V range. The actual value is determined by the maximum voltage which the USB-C power adapter can supply.
- Remove the multimeter and connect an external load to the terminal block (J9).
The maximum current that can be consumed by an external load cannot exceed 5
A.
www.cypress.com/CY7111
Next steps
- See the CY7111 kit user guide (available as part of the CY7111 kit release package) to learn more about the features supported in the CY7111 hardware and how to develop applications using ModusToolbox™ software.
Please note!
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN
HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE, OR DESCRIPTION
OF ANY FUNCTIONALITY, CONDITIONS, AND/OR QUALITY OF OUR PRODUCTS OR ANY
SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL
SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT
PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL
DEPARTMENTS ARE REQUIRED TO EVALUATE
THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION.
WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN
HEREIN AT ANY TIME.
Additional information
For further information on technologies, our products, the application of our
products, delivery terms and conditions, and/or prices, please contact your
nearest Infineon technologies office
(www.infineon.com).
Warnings
Due to technical requirements, our products may contain dangerous substances.
For information on the types in question, please contact your nearest Infineon
Technologies office.
Except as otherwise explicitly approved by us in a written document signed by
authorized representatives of Infineon
Technologies, our products may not be used in any life-endangering
applications, including but not limited to medical, nuclear, military, life-
critical or any other applications where a failure of the product or any
consequences of the use thereof can result in personal injury.
www.infineon.com
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2021 Infineon Technologies AG.
All Rights Reserved.
Document Number: 002-32419 Rev. *A
Date: 08 / 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>