infineon CY8CKIT-028-SENSE IoT Sense Expansion Kit User Guide
- June 6, 2024
- infineon
Table of Contents
infineon CY8CKIT-028-SENSE IoT Sense Expansion Kit User Guide
Kit contents
- CY8CKIT-028-SENSE IoT sense expansion kit
- Quick start guide (this document)
Features
- XENSIV™ digital barometric pressure sensor with built-in temperature sensor
- Two high-performance XENSIV MEMS digital microphones
- 9-axis absolute orientation sensor
- Wake-on-sound piezoelectric MEMS microphone
- I²C-based OLED display module
- Arduino™ UNO compatible headers
- Low-power stereo audio codec with audio jack
Top board details
- Arduino UNO R3 compatible I/O headers (J2, J3, J4)
- XENSIV digital barometric pressure sensor with built-in temperature sensor (U3)
- OLED display module (ACC6, J6)
- Arduino UNO R3 compatible power header (J1)
Bottom board details
- XENSIV MEMS digital microphones (U1, U2)
- Bosch 9-axis absolute orientation sensor (U6)
- Crystal oscillator (Y1)
- I²C level translator (U7)
- Audio jack type selection switch (SW1)
- Audio codec (U4)
- 3.5-mm stereo audio jack socket (J5)
- Vesper piezoelectric MEMS analog microphone (U5)
- Preamplifier for analog microphone (U8)
To learn more about how to use this shield for Machine Learning applications please visit: www.cypress.com/products/modustoolbox/machine- learning
This expansion kit is intended to be used along with an Infineon MCU kit that has a compatible interface, such as the CY8CKIT-062S2-43012. For a full list of compatible kits, see www.cypress.com/CY8CKIT-028-SENSE.
Document Number: 002-32583 Rev. *C
Date: 06/2021
Published by Infineon Technologies AG 81726 Munich, Germany © 2021 Infineon Technologies AG. All Rights Reserved.
www.cypress.com/CY8CKIT-028-SENSE
References
- Semiconductor & System Solutions - Infineon Technologies
- Support: Live Chat Online, Tech Support & FAQ - Infineon Technologies
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>