MiBOXER WL3-P75V24 75W RGB Dimming LED Driver Instruction Manual
- June 5, 2024
- MiBOXER
Table of Contents
MiBOXER WL3-P75V24 75W RGB Dimming LED Driver
Product feature
This product uses WiFi + Bluetooth + 2.4G wireless transmission technology, low power consumption, strong anti-interference ability. WiFi + Bluetooth connect network can greatly enhance the connect network experience. When the router is disconnected, Bluetooth can also directly connect and control equipment at close range. After successful network configuration using [MiBoxer Smart] APP to achieve wireless dimming, remote control, group control, scene control, timing control, music movement, biorhythm, sleep plan, wake plan, one key execution, automation,etc. functions. And it supports 2.4G remote control.
Product Parameter
- Model No.: WL3-P75V24
- Input Voltage: AC100V~240V 50/60Hz
- Output Voltage: DC24V
- Output current: Max 3A
- WiFi Standard: IEEE 802.11b/g/n 2.4GHz
- RF: 2.4GHz TA: 40°C TC: 85°C
- Remote Control Distance: 30m
- Bluetooth Protocol: Bluetooth4.2
Connection Diagram
Auto-transmitting & Synchronization (only for remote control)
-
Signal transmitting
A dimming LED driver can transmit the signals from the remote control to another one within 30m, as long as there is dimming LED driver within 30m, the remote control distance is unlimited. -
Modes synchronization
Different dimming LED drivers can work synchronously when they are started at different times, controlled by the same remote, under same dynamic mode and within 30m distance.
Dynamic mode selection (only for remote control)
-
Select dynamic mode sheet 1 :
The dimming LED driver is powered off for 10 seconds and then powered on, or the short ” SET ” button one time. Press the ” S+ ” button 5 times within 3 seconds, the blue light blink 3 times slowly, the selection is done successfully. -
Select dynamic mode sheet 2 :
The dimming LED driver is powered off for 10 seconds and then powered on, or the short ” SET ” button one time. Press the ” S- ” button 5 times within 3 seconds, the yellow light blink 3 times slowly, the selection is done successfully.
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Mardi Gras |
Adjustable
2| Automatic color change
3| Sam
4| Gemstone
5| Twilight
6| American
7| Fat Tuesday
8| Party
9| Slow Color Splash
Dynamic mode sheet 2 (need to switch manually)
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Colors gradual change |
Adjustable
2| White light Gradual change
3| RGB gradual change
4| Seven colors jump to change
5| Jump to change randomly
6| Red light gradual change
+Flash 3 times
7| Green light gradual change
+Flash 3 times
8| Blue light gradual change
+Flash 3 times
9| White light gradual change
+Flash 3 times
Attention
- Please check whether the voltage of the power supply is in accordance with the dimming LED driver, and please check the connection of both the cathode and anode, otherwise, the controller will be broken.
- Please do not use the controller in a place with a widely range metal area or strong electromagnetic waves nearby, otherwise, the remote distance will be affected seriously.
- Non-professional users are not allowed to disassemble the equipment directly, otherwise, the equipment may be damaged
APP Installation
Download and install [MiBoxer Smart] APP Search for [MiBoxer Smart] in Apple or Google store. Please click ” Register ” button to create account while using it in the first time, Log in directly if you already had account.
Network Configuration
- Connect dimming LED driver with power supply.
- Confirm indicator light is flashing quickly (2 flashes per second) If the indicator light isn’t in fast flashing state, there are two ways to enter:
- Long press the” SET ” key until the indicator light flashes quickly.
- Power off and on controller 3 times.
- Connect phone with home WiFi network in the 2.4GHz frequency.
- Open the homepage of the APP and click ” + ” button at the upper right corner of page.
- Click ” WiFi Lighting ” on the left side of page and then click ” Dimming LED Driver “
- Follow APP prompts to complete configuration.
- Added devices will be displayed on home page after network configuration is successful.
- Click device you want to control to enter the control interface.
APP control
- Click ” device ” or ” group ” you want to control on the homepage to enter the control page, where you can control color, saturation, brightness, color temperature, and scene.
- Click music to enter music rhythm mode, light will change with the rhythm of music.
- Click ” More ” to enter biorhythm, timing, sleep plan, wake plan, and power-on response setting.
- After opening the ” Do Not Disturb Mode ” in the power-on response, turn on light needs power on twice when light is powered off in the off state. (Applicable for frequent power outages area to save energy)
Note: Music rhythm mode requires a phone to keep on
this page.
Device name editing, third-party control, device sharing, group control.
- Click ” ” on the upper right corner of the control page to enter edit page, where you can modify device name, icon, etc.
- Click the icon under third-party control to view detailed description of third-party control.
- Click ” Share Device ” to share the device with family and friends.
- Click ” Create Group ” and follow the APP prompt after setting is completed, the device can be controlled by a group
Intelligent control
- Click ” Smart ” at the bottom.
- Click ” + ” in the upper right corner to create intelligent control.
- In the page of creating smart, you can set command to be executed under the specified conditions (such as: turn on or turn off light, color, brightness, mode, etc.)
Support Amazon Alexa Control
Please search ” Smart Life ” skill in Alexa APP and activate the skill.
Support Google Home Control
Please search ” Smart Life ” skill in Google Home APP and activate the skill.
Bluetooth control instructions
When the router is disconnected, you can turn on the Bluetooth of your
smartphone and connect directly controlled device at a short distance.
Switching Bluetooth control steps:
- Complete the network distribution of the equipment
- Power off the router used for network configuration, turn off WiFi on the mobile phone, turn on Bluetooth, and wait for about 3-5 minutes to control.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>