DRAPER WTM1 Mechanical Water Timer Instructions
- June 5, 2024
- DRAPER
Table of Contents
DRAPER WTM1 Mechanical Water Timer
IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE
OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling, operating or maintaining this product. This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product. Whilst every effort has been made to ensure the accuracy of the information contained in this manual, the Draper Tools policy of continuous improvement determines the right to make modifications without prior warning.
TITLE PAGE
INTRODUCTION
As our user manuals are continually updated, users should make sure that they
use the very latest version. Downloads are available from:
http://www.drapertools.com/manuals.pgm DRAPER TOOLS LIMITED, HURSLEY ROAD,
CHANDLER’S FORD, EASTLEIGH, HAMPSHIRE, SO53 1YF, UK
UNDERSTANDING THIS MANUALS SAFETY CONTENT
WARNING
Information that draws attention to the risk of injury or death.
CAUTION
Information that draws attention to the risk
COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited. Permission is granted to reproduce this
publication for personal & educational use only. Commercial copying,
redistribution, hiring or lending is prohibited. No part of this publication
may be stored in a retrieval system or transmitted in any other form or means
without written permission from Draper Tools Limited. In all cases this
copyright notice must remain intact.
GUARANTEE
Draper Tools have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship. Should the tool develop a fault, please return the complete tool to your nearest distributor or contact Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England. Telephone: (023) 8026 6355.Proof of purchase must be provided with the tool.If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs attempted or made by any person other than the authorized Draper warranty repair agent.
Note:
If the tool is found not to be within the Terms of Warranty, repair and
carriage charges will be quoted and made accordingly. This guarantee applies
in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised. Your Draper guarantee is not effective unless you
can produce upon request a dated receipt or invoice to verify your proof of
purchase within the guarantee period. Please note that this guarantee is an
additional benefit and does not affect your statutory rights. Draper Tools
Limited.
Note:
This tool is intended for domestic use only.
INTRODUCTION
SCOPE
This timer allows setting watering time easy dial with manual on/off and
clear digital display
SPECIFICATION
- Stock No…………………………………………36748
- Part No………………………………………….WTM1
- Inlet ………………………… 1″BSP Female with a
- ……. ¾”BSP female adaptor ring with filter.
- Outlet…………………..¾” BSP Male with a ½”
- ………………………………………. hose connector
HANDLING & STORAGE
Do not drop this machine. Store out of the reach of children.
- Dial
- Water inlet
- Water outlet
IMPORTANT
- Recommended Water Pressure: 0.5 – 12 bar. In higher pressure areas, use a pressure reducer.
- Recommended Operating Temperature: 4° to 60°. It is recommended to remove the timer from the tap during colder months and when temperatures drop below 4°. The timer should not be subjected to freezing temperatures or frost.
- Recommended Water Source: Use cold mains water only. If you are using a gravity fed watering system, ensure that you use a tap filter. Do not use any bore or unfiltered water. Do not use any kind of pump to draw water. Do not use if the water supply is unstable. Do not use any liquids other than water.
INSTALLATION
- The Draper Water Timer is best suited to a cold mains fed system.
- The timer connects to the tap using the 1″ connector or ¾” reducer supplied.
- Using a hose connector (not supplied), connect the hose directly to the timers, ½” connector.
- Set the required watering time on the dial before timing the water on.
GET STARTED
This mechanical timer is very easy to use. It functions like an egg timer allowing you to set a watering time of up to 120 minutes. If you just want regular water flow from the tap, turn the dial to MANUAL and water will flow freely.
WATER WITHOUT TIMING
(Turn water on and off without having to remove timer from the tap)
- Turn the dial anti-clockwise to MANUAL to turn on the water flow.
- To stop water flow, turn the dial clockwise to ‘0’
SET A WATERING TIME
(Ideal for use with sprinklers and other watering systems)
- IMPORTANT: Make sure your sprinkler/watering system is set up correctly before continuing. As soon as the dial is turned, the valve opens allowing water to flow. It is recommended to set the timer first and then turn on the tap.
- Turn the dial clockwise so the arrow on
- Turn the dial clockwise so the arrow on the dial points to the desired watering time. Watering will begin immediately.
- When the timer reaches ‘0’, the valve will close automatically and stop the flow of water
TIMER CARE MAINTENANCE
- Keep clear of any dirt or debris which may block the valve and cause the timer to malfunction.
- Disassembling the timer improperly will void all warranties.
DISPOSAL
-
At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations.
-
Contact your local authority for details of collection schemes in your area.
In all circumstances:- Do not dispose of power tools with domestic waste.
- Do not incinerate.
- Do not abandon in the environment.
- Do not dispose of WEEE* as unsorted municipal waste.
Waste Electrical & Electronic Equipment.