manta5 XE1 Hydrofoiler Water Bike Instructions
- June 13, 2024
- manta5
Table of Contents
REMOVE BOTTOM GEARBOX
This tutorial shows how to remove the Bottom Gearbox from the XE-1
1. Work Instruction – Remove Bottom Gearbox
TOOLS REQUIRED
ID | Description | Task |
---|---|---|
5 mm Hex Drive / Allen Key | Loosen M6 Cap Screws | |
10 mm Open / Combination Wrench | Loosen M6 Nylock Nut |
1.1 Loosen and remove the two aft M6 nylock nuts. [Tools: 10 mm Wrench, 5 mm Hex Key]
1.2 Remove the two aft 45 mm length cap screws that lock in the Bottom Gearbox. [Tools: By Hand]
1.3 Remove the Bottom Gearbox from the Frame and disengage the Bottom Gearbox Input Shaft from the Propeller Drive Shaft.
INFORMATION: Inspect the Gearbox. If excessive wear and/or damage is detected, it is strongly recommended that the Propeller Drive Shaft Assembly is also removed and inspected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>