CARSON LM-10 LED Lighted Magnifier Instruction Manual
- June 6, 2024
- Carson
Table of Contents
CARSON LM-10 LED Lighted Magnifier
Installing Batteries
Open the battery door located on the bottom of the unit (Fig. 1). Insert 3 fresh AAA batteries (not included) according to polarity indicators marked inside the battery compartment (Fig. 2). Snap battery door closed when complete.
To Activate LED Light
Press the button on top of the magnifier base to turn on the LED light (Fig. 3). Turn the light off when not in use.
To Use Hands Free
Lift the top half straight up until the unit stands on its own (Fig. 4). Open lens cover and position lens as desired (Fig. 5). To use as a desk lamp, keep the lens cover closed (Fig. 6). Turn the light off and return the magnifier to the closed position when storing (Fig. 7).
Warning: Use only alkaline batteries. Mixing old and new, different brands or types within brands may cause batteries to leak, overheat or explode. Keep away from fire or excessive heat. Inspect batteries for corrosion or leakage. Insert in the direction indicated. Rechargeable batteries not recommended.
Cleaning Your Magnifier
Clean lens with a soft, clean microfiber cloth by rubbing gently in a circular motion. Moisten the lens cloth with water if needed. Do not use harsh chemicals, solvents or abrasives as they may damage the lens.
Customer Service
If you experience any difficulties, please contact us and we will be happy to
help you.
In the U.S.A.
Phone: 1-631-963-5000 Email:
info@carson.com
For warranty information, visit
www.carson.com/warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>