DRAPER 63056 Knapsack Pressure Sprayer Instruction Manual
- June 3, 2024
- DRAPER
Table of Contents
**
**
DRAPER 63056 Knapsack Pressure Sprayer
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE
OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions.
This document is part of the product, keep it for the life of the product
passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which
the product has been designed, and contains all the necessary information to
ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and
operator safety, together with longer life of the product itself. All
photographs and drawings in this manual are supplied by Draper Tools to help
illustrate the operation of the product. Whilst every effort has been made to
ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications
without prior warning.
SCOPE
For use with water, herbicides, pesticides and solvent-free preservative treatments.
SPECIFICATION
- Stock no. ……………………………………………………………………………………………………………. 63056
- Part no……………………………………………………………………………………………………………….PS12K
- Bottle capacity ………………………………………………………………………………………………………… 15L
- Working capacity …………………………………………………………………………………………………….. 12L
HEALTH & SAFETY INFORMATION
GENERAL SAFETY WARNINGS
WARNING:
READ and UNDERSTAND the instructions completely before using these sprayers.
The user must always ask the dealer for the safety card of the chemical
product to be used, also for disposal of the residual liquid. The use of
substances not in conformity with the current regulations is at the user’s
risk and peril.
NOTE:
After use, rinse the container then operate the pump with clean water to
completely empty the container and piston.
TECHNICAL DESCRIPTION
IDENTIFICATION
- Nozzles (x3)
- Pump lever arm
- Lance + Pump lever arm support
- Trigger assembly
- Lance
- Pump piston
- Hose
- Filler cap
- Integral filter
- Tank
- Strap buckles
- Strap + adjustment clips
UNPACKING & CHECKING
PACKAGING”
Carefully remove the product from the packaging and examine it for any sign of
damage that may have happened during shipping. Lay the contents out and check
them against the parts shown below. If any part is damaged or missing; please
contact the Draper Helpline (the telephone number appears on the Title page)
and do not attempt to use the product. The packaging material should be
retained at least during the guarantee period: in case the machine needs to be
returned for repair.
Warning
Some of the packaging materials used may be harmful to children. Do not
leave any of these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of
correctly; according to local regulations.
WHAT’S IN THE BOX?
There are a number of parts in the box which need to be assembled.
- Lance/nozzle connectors
- Lever arm accessories
ASSEMBLY
Small parts stored inside. 
OPERATION AND USE
MAINTENANCE
CLEANING THE BACKPACK SPRAYER:
Press the trigger on the sprayer handle to release the pressure remaining
through the lance. Unscrew tank cap, if the outside of the cap is dirty,
thoroughly clean the area around the thread and thread O-ring. Clean the inlet
filter and tank cap in clean water. Empty the tank and fill with clean water
(with detergent added to the water if necessary).
Spray the water out of the backpack sprayer until the tank is empty (This
cleans the nozzle and valves). Leave the backpack sprayer open and allow it to
dry.
CLEANING THE FILTER IN THE SPRAYER HANDLE:
Unscrew the union nut and pull the hose with filter out of the sprayer handle.
Rinse the filter under running water and reattach the sprayer handle.
CLEANING THE PUMP:
lf the pump does not provide pressure after cleaning your backpack sprayer you
must also clean the pump. Push out the locking ring (using a screwdriver, for
example) and pull the joint rod out of the pump. Unscrew the union ring and
pull out the pump. Inspect the pump O-ring and install a new O-ring if
necessary. Pull out the inner part of the pump and the gasket. Clean all pump
parts and gaskets with water (and detergent). Reassemble the pump in the
reserve order.
NOTE:
When assembling the pump ensure that the pump gaskets are seated properly
after installation and are not squashed.
At least once a year clean pump thoroughly, re-grease or lubricate all moving
parts.
WARNING:
When assembling and servicing, carefully insert the pump piston without
forcing, so as not to damage the gasket.
CONTACTS
-
DRAPER TOOLS LIMITED,
Hursley Road, Chandler’s Ford,
Eastleigh, Hampshire. SO53 1YF. U.K. -
Helpline: (023) 8049 4344
-
Sales Desk: (023) 8049 4333
-
Internet: www.drapertools.com
-
E-mail: sales@drapertools.com
-
Sales Fax: (023) 8049 4209
-
General Enquiries: (023) 8026 6355
-
Service/Warranty Repair Agent
For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>