SEENDA HED-TH10-BT Wireless Headset with Microphone User Manual
- June 14, 2024
- SeenDa
Table of Contents
SEENDA HED-TH10-BT Wireless Headset with Microphone
Product Overview
Package Contents
A. Bluetooth Headset HED-TH10-BT x 1
B. USB-Dongle（Note: Another bluetooth version of the headset, without the
dongle in the package)
C. Type-C USB Charging Cable x 1
D. 1.2 m Audio Cable
E. User Manual x 1
Basic Operation
Bluetooth Pairing and Connection
A. In ‘OFF’ status, long press the MFB button 3 seconds to enter pairing mode
with the headset Blue & Red indicator light flashing alternately.
B. Search and click to connect ‘HEO-411 ’ on your phone Bluetooth list, and
the headset blue indicator flashes after successfully connected.
That means that you can play music from the headset at this time.
C. Press MFB/ volume+/ volume- on the Bluetooth headset to control the
answer/hang up a call and play/ pause of the music, next/ previous song,
volume up/ down.
Dongle Connection
Note: If the headset without dongle, please ignore this connection method
- In ‘OFF’ status, long press the MFB button 3 seconds to enter pairing mode with Blue & Red indicator light flashing alternately.
- For the first time, after plugging in and powering on(pairing directly with Bluetooth headset), the transmitter red/blue light will cross latent flash when pairing, and the transmitter blue light will keep on after pairing successfully. If pairing fails, continue pairing. (When pairing, the red and blue lights flash alternately; Matching success blue light long on)
- Second use, plug in and power on — the transmitter will connect the headset for 20 seconds (the transmitter blue light flashes three times within 20 seconds, red light flashes 10 times) , if the headset fails to connect back — red/blue light cross-flashing
LED Indicator
Charging
Please charge the HED-TH10-BT at once when the Red LED flashes.
Charging time takes about 2 hours. There will be solid and continuous LED Blue
when full charged.
Notes：
- Pls charge the HED-TH10-BT at least one time every 3 months when not in use.
- Charging when the item powered on, the headset will be automatically reset and powered off.
Product Specification
Notes Actual use time will differ from environment and music
Attention and Q & A
-
How to reconnect and operate when failed to reconnect?
A: After HED-TH10-BT connected with your mobile phone successfully, it will search and reconnect the paired device automatically when powered on. If failed, please pair and connect again. -
How to Delete paired records?
A: In ‘Power-ON’ status, long press the volume + and the volume- button for 5 seconds to clear the pairing record.
The indicator Blue and Red flash once at the same time, which means the pairing record has been cleared and the headset will not reconnect to the connected device at this time. When there are various connection problem, try clearing the pairing record.(NOTE: Please restart the headset when clearing the records. The headset will not cut connection when clearing records in connected status.) -
What’s the password for pairing?
A: Some connection devices require password for pairing, pls try 0000 -
What devices could charge for the headphone?
A: Any car charger, power bank, or PC that meets DC 5V or charging current ≧500mA could be used for this item. -
Three-way calling function operation
A: I. When new call coming during a call- Short press the MFB to answer the new call and hang up the current call;
- Double press the MFB to answer the new call and keep the current call;
- Long press the MFB for 2 seconds to reject a new call.
II. When you are on a three-party call, double press the MFB to switch audio between the current call and the standby call.
-
How to mute the microphone
A: Short press the Microphone Mute button. -
How to reset the headphone
A: Long Press both of the volume + and the volume – buttons for 5 seconds, and the red/blue lights flashing alternately.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>