SEECODE 20188 Car Cup Cooler and Heater User Manual

SEECODE 20188 Car Cup Cooler and Heater

Seecode Cup Cooler Heater

This document is protected by copyright. Any reproduction or reprint, even in parts, and any reproduction of the illustrations, even in a changed state, is strictly prohibited without the written consent of the manufacturer.

Information on environmental protection

• The packaging material used is recyclable. Dispose of packaging material which is no longer needed in accordance with the locally applicable regulations.
• This product must not be disposed of in the normal household waste within the European Union.
• Dispose of the device via the communal collecting points.

Guarantee/Warranty

The warranty period is 24 months from the date of purchase. This inclu-des a 6-month guarantee from the date of purchase. The territorial scope of the warranty protection is Europe-wide. The proof of purchase is valid as proof of this. The product has been thoroughly checked for quality and functionality before dispatch. The guarantee is excluded in the following cases:

• in the event of modifications to the system without our approval
• in the case of use other than that stated above
• in the event of damage caused by falling

When making a claim under the guarantee/warranty, please return the complete product in transport-safe packaging to the point of sale from which the product was purchased. Describe the detected defect in the product and enclose the original proof of purchase with the shipment. The seller reserves the right to remedy the defect before refunding the purchase price. Necessary transport costs will be reimbursed to the customer if a justi-fied claim under the statutory guarantee/warranty is established. The use of the legal rights for defects is free of charge. These are not restricted by the guarantee. Symbols used
WARNING
Is used for a possible dangerous situation which could lead to serious injuries or death. Follow the instructions given here in order to avoid danger. A note marks additional information which facilitates the handling of the product.

Intended use

The device is only intended for cooling and heating beverages. Any other use or use beyond what is specified is regarded as not intended.

Warning
The device can be dangerous in the case of unintended use and / or different use:

• Only use the device as intended.
• Comply with the procedures described in these operating instruc-tions.
• Claims of any kind due to damages as a result of unintended use are excluded.
• This risk is borne exclusively by the operator.

Limitation of liability
All technical information, data and notes for connection and operation contained in these operating instructions correspond to the latest status during printing and are carried out to the best of our knowledge, taking into consideration our experience and knowledge up to now. No claims can be derived from the data, illustrations, and descriptions in these operation instructions. The manufacturer does not assume any liability for damages due to non-compliance with the operating instructions, non-intended use, improper repairs, unauthorized changes or use of unauthorized spare parts.

Basic safety information

• Check the device for any visible external damage before use. Do not put into operation a damaged or fallen device.
• Persons, who are not in a position to safely operate the product due to their physical, mental or motor skills, may only use the device under supervision or instruction by a responsible person.
• Children are only allowed to use the device under supervision.
• The device may only be repaired by authorized specialized companies or the customer service. Improper repairs can lead to significant dangers for the user, and to the expiry of the warranty claim.
• Protect the device from moisture and the penetration of fluids.
• Avoid direct sun radiation

Requirements concerning the installation site
For a safe and faultless operation of the device, the installation site has to meet the following requirements:

• The device has to be placed on a firm, flat and horizontal base.
• Do not place the device in a hot, wet or very wet environment or near flammable material.

Unpacking

• Take the device and the operating instructions out of the cardboard box.
• Remove all packaging materials and protective films from the device before first use, especially, where applicable, the protective film at the bottom side of the device.
• Store the original packaging during the warranty and / or guarantee period of the device so that you can dispatch the device in case 28 CAN EN of warranty and / or guarantee properly packed. Transport damages will cause to the expiration of any guarantee rights.

Checking the scope of delivery
Check the content for completeness and visible damages. Immediately inform your supplier about any incomplete or damaged delivery.

Product overview

Accessories

• 1 x Charging cable for the cigarette lighter
• 1 x Instruction Manual

Specifications

• Connector: 12V / 3A
• Power: 36W
• Measurements: 105 x 105 x 183 mm (LxBxH)
• Diameter outside (top): 97,3 mm
• Diameter outside (bottom): 74,9 mm
• Diameter inside: 68,3 mm
• Weight: 473 g

Operating Instruction

1. Plug the charging cable into the Seecode Cup Cooler Heater and the other end into the cigarette lighter socket of your car or any other similar connector.
2. Please choose one of the following modes:
3.  Press the cooling function button to cool beverages. The button turn lightly blue.
4.  Press the heating function to warm up beverages. The button turn lightly red.
5. To switch off the device, click on the respective mode again.

Note:

• For a good result, use bottles, cans, cups, etc. that fit perfectly in the holder.
• For regular beverages, the average cooling and heating time is about 30 minutes or more.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>