KRAMER PT-102VN 1:2 Video DA Composite Video User Manual
- June 14, 2024
- Kramer
Table of Contents
- Step 1: Check what’s in the box
- Step 2: Install the PT-102VN
- Step 3: Connect the inputs and outputs
- Step 4: Connect the power
- Step 5: Operate the PT-102VN
- Introduction
- Getting Started
- Overview
- Connecting the PT-102VN
- Technical Specifications
- LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KRAMER PT-102VN 1:2 Video DA Composite Video User Manual
This guide helps you install and use your product for the first time. For more
detailed information, go to http://www.kramerelectronics.com/support/product
downloads.asp to download the latest manual or scan the QR code on the left.
Step 1: Check what’s in the box
- PT-102VN 1: 2 Video DA
- 1 Power supply (12V DC)
- 4 Rubber feet
- 1 Quick Start sheet
Save the original box and packaging materials in case you need to return your PT-102VN for service.
Step 2: Install the PT-102VN
Attach the rubber feet and place on a table or mount the PT-102VN in a rack (using an optional RK-4PT rack adapter).
Step 3: Connect the inputs and outputs
Always switch off the power on each device before connecting it to your **PT- 102VN.
**
Step 4: Connect the power
Connect the 12V DC power adapter to the PT-102VN and plug the adapter into the mains electricity.
Step 5: Operate the PT-102VN
Using a small screwdriver, adjust the EQ. and LEVEL as needed.
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14: Collaboration.
Congratulations on purchasing your Kramer PT-102VN 1:2 Video DA, which is ideal for the following typical applications:
- Video duplication studios
- CCTV and home theater use
- Rental and staging applications
- Any professional display system requiring an identical picture on several monitors
Getting Started
We recommend that you:
- Unpack the equipment carefully and save the original box and packaging materials for possible future shipment
- Review the contents of this user manual
Go to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
Achieving the Best Performance
To achieve the best performance:
- Use only good quality connection cables (we recommend Kramer high-performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
- Do not secure the cables in tight bundles or roll the slack into tight coils
- Avoid interference from neighboring electrical appliances that may adversely influence signal quality
- Position your Kramer PT-102VN away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
Safety Instructions
Caution: There are no operator
serviceable parts inside the unit
Warning: Use only the Kramer Electronics input power wall adapter that is
provided with the unit
Warning: Disconnect the power and unplug the unit from the wall before
installing
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Overview
The Kramer PT-102VN is a distribution amplifier for composite video or SDI signals. It takes one input, provides correct buffering and isolation and distributes the signal to two identical outputs. Specifically, the PT- 102VN:
- Accepts a single input and distributes it to 2 identical outputs using BNC connectors
- Has a bandwidth of 430MHz, ensuring that it remains transparent even in the most critical applications
- Has gain and equalization (EQ.) controls to compensate for cable losses
- Is ideally suited to work with the Pico TOOLS™ PT-102AN 1:2 Audio DA
Defining the PT-102VN 1:2 Video DA
This section defines the **PT-102VN.
Figure 1: PT-102VN 1:2 Video DA**
# | Feature | Function |
---|---|---|
1 | OUT 1 BNC Connector | Connects to composite video acceptor 1 |
2 | OUT 2 BNC Connector | Connects to the composite video acceptor 2 |
3 | ON LED | Illuminates when receiving power |
4 | EQ. Trimmer | Adjusts the cable compensation equalization level(using a |
small screwdriver)
5| LEVEL Trimmer| Adjusts the video signal level for outputs 1 and 2(using
a small screwdriver)
6| INPUT BNC Connector| Connects to the composite video source
7| 12V DC| +12V DC connector for powering the unit
Connecting the PT-102VN
Always switch off the power to each device before connecting it to your PT-102VN. After connecting your PT- 102VN, connect its power and then switch on the power to each device.
You can connect your PT-102VN:
- As a 1:2 video DA (see Section 4.1)
- To a 4x1VB 4×1 High Resolution Video Switcher to increase the number of inputs (see Section 4.2)
- To two 105VB 1:5 High Resolution Video DA units to increase the number of outputs (see Section 4.3)
Connecting the PT-102VN 1:2 Video DA
To connect the PT-102VN 1:2 Video DA, as the example in Figure 2 illustrates, connect the following:
- Connect a composite video source (for example, a composite video player) to the INPUT BNC connector.
- Connect the two OUT BNC connectors to up to two composite video acceptors, as follows:
- Connect the OUT 1 connector to video acceptor 1 (for example, a projector)
- Connect the OUT 2 connector to video acceptor 2 (for example, a display)
- Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity.
- If required, adjust the output signal level and/or cable compensation equalization level.
Figure 2: Connecting the PT-102VN 1:2 Video DA
Increasing the Inputs
When it is necessary to handle more than one input, you can increase the number of inputs for example, from one to four, by connecting the Kramer 4x1VB 4×1 High Resolution Video Switcher (a mechanical switcher that lets you select any input to route to one output via its INPUT SELECTOR buttons. Alternatively, you could connect the PT-102VN to a video switcher with more than four inputs) in addition to the PT-102VN 1:2 Video DA, as the example in Figure 3 illustrates:
- Connect up to four sources to the four IN connectors of the 4x1VB.
- Connect the OUTPUT connector of the 4x1VB to the INPUT connector of the PT-102VN.
- Connect the OUT connectors of the PT-102VN to up to two acceptors.
- Select the desired input via the INPUT SELECTOR switch of the 4x1VB.
- Connect the 12V DC power adapter to the power socket of the PT-102VN and connect the adapter to the mains electricity
- Adjust the output signal level and/or cable compensation equalization level of the PT-102VN, if required.
Figure 3: Increasing the Inputs – Connecting a 4:2 DA
Increasing the Outputs
The PT-102VN can be cascaded with other high quality distribution amplifiers to distribute a video source to more than two outputs. For example, you can increase the number of outputs from two to ten, by connecting a PT-102VN 1:2 Video DAunit to two Kramer 105VB 1:5 High Resolution Video DA units, forming a 1:10 DA, as the example in Figure 4 illustrates:
To form a 1:10 DA, do the following:
- Connect a source to the INPUT BNC connector of the PT-102VN.
- Connect the OUT 1 BNC connector of the PT-102VN to the INPUT BNC connector of the first 105VB.
- Connect the OUT 2 BNC connector of the PT-102VN to the INPUT BNC connector of the second 105VB.
- Connect the five OUT BNC connectors of the first 105VB to the video acceptors 1 to 5, and connect the five OUT BNC connectors of the second 105VB to five video acceptors as well.
- Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity (for the PT-102VN and both 105VB units).
- Adjust the output signal level and/or cable compensation equalization level of the PT-102VN, if required.
Figure 4: Increasing the Outputs – Connecting a 1:10 DA
Technical Specifications
INPUTS: | 1 composite video, 1Vpp /75W on a BNC connector |
---|---|
OUTPUTS: | 2 composite video, 1Vpp /75W on BNC connectors |
MAX. OUTPUT LEVEL: | 2Vpp |
BANDWIDTH (-3dB): | 430MHz |
DIFF. GAIN: | 0.05% |
DIFF. PHASE: | 0.05Deg |
K-FACTOR: | <0.05% |
S/N RATIO: | 76.1dB |
CONTROLS: | Level: -1.2dB to +6dB, EQ.: 0 to + 7.5dB @50MHz via trimmers |
COUPLING: | AC |
POWER CONSUMPTION: | 12V DC, 35mA |
OPERATING TEMPERATURE: | 0° to +40°C (32° to 104°F) |
STORAGE TEMPERATURE: | -40° to +70°C (-40° to 158°F) |
HUMIDITY: | 10% to 90%, RHL non-condensing |
DIMENSIONS: | 6cm x 6.5cm x 2.5cm (2.36″ x 2.56″ x 1″) W, D, H |
WEIGHT: | 0.14kg (0.31lbs) approx. |
INCLUDED ACCESSORIES: | Power supply, mounting bracket |
OPTIONS: | RK-4PT 19″ rack adapter |
Specifications are subject to change without notice at http://www.kramerelectronics.com
LIMITED WARRANTY
The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below:
What is covered
This limited warranty covers defects in materials and workmanship in this product
What is Not Covered
This limited warranty does not cover any damage, deterioration or malfunction resulting from any alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, accident neglect, exposure to excess moisture, fire, improper packing and shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature. This limited warranty does not cover any damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by Kramer Electronics to make such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product. This limited warranty does not cover cartons, equipment enclosures, cables or accessories used in conjunction with this product.
Without limiting any other exclusion herein, Kramer Electronics does not warrant that the product covered hereby, including, without limitation, the technology and/or integrated circuit(s) included in the product, will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used.
How Long Does this Coverage Last
Seven years as of this printing: please check our Web site for the most cument and accurate warranty information
Who is Covered Only the original purchaser of this product is covered under this limited warranty. This limited warranty is not transferable to subsequent purchasers or owners of this product
What Kramer Electronics will do Kramer Electronics will, at its sole option, provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty.
-
Elect to repair or facilitate the repair of any defective parts within a reasonable period of time, free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition. Kramer Electronics will also pay the shipping costs necessary to fretum this product once the repair is complete.
-
Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially
the same function as the original product. -
Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited arranty.
What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party must be insured during shipment, with the insurance and shipping authorized to repair Kramer Electronics products, this product charges prepaid by you. If this product is returned uninsured, you assume all risks of loss or damage during shipment. Kramer Electronics will not be responsible for any costs related to the removal or re-installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product, any adjustment of user controls or any programming required for a specific installation of this product
How to Obtain a Remedy under this Limited Warranty
To obtain a remedy under this limited warranty, you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you. For a list of authorized Kramer Electronics resellers and/or Kramer Electronics authorized service providers, please visit our web site at www.kramerelectronics.com or contact the Kramer Electronics office nearest you.
In order to pursue any remedy under this limited warranty, you must possess an original, dated receipt as proof of purchase from an authorized Kramer Electronics reseller. If this product is returned under this limited warranty, a return authorization number, obtained from Kramer Electronics, will be required. You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product.
If it is decided that this product should be returned directly to Kramer Electronics, this product should be properly packed, preferably in the original carton, for shipping. Cartons not bearing a return authorization number will be refused.
Limitation on Liability
THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW. KRAMER IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING ELECTRONICS FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY. Some countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or indirect damages, or the limitation of liability to specified amounts, to the above limitations or exclusions may not apply to you.
Exclusive Remedy
TO THE MAXIMUM EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW, KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW, THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW. IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A “CONSUMER PRODUCT UNDER THE MAGNUSON. MOSS WARRANTY ACT (15 USCA §2301, ET SEQ.) OR OTHER APPICABLE LAW, THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU, AND ALL IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDINGWARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE, SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW.
Other Conditions
This limited warranty gives you specific legal rights, and you may have other rights which vary from country to country or state to state.
This limited warranty is void if (i) the label bearing the serial number of this product has been removed or defaced, () the product is not distributed by Kramer Electronics or (iii) this product is not purchased from an authorized Kramer Electronics reseller. If you are unsure whether a seller is an authorized Kramer Electronics reseller, please visit our Web site at www.kramerelectronics.com or contact a Kramer Electronics office from the list at the end of this document, Your rights under this limited warranty are not diminished if you do not complete and retum the product registration form or complete and submit the online product registration form. Kramer Electronics thanks you for purchasing a Kramer Electronics product. We hope it will give you years of satisfaction.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>