Dongguan Trangjan Industrial P03 Micflip Finder User Manual

Trangjan Industrial P03 Micflip Finder
User Manual

Product Overview

Important tips: When pairing a device with the Find my app, the phone will link to the Apple server. Pairing may fail because of network problems. The following actions are recommended:

1. Change the phone’s network, such as switching between WiFi and mobile network;

2. Factory Reset for the device: When the device is powered on, double-click the device button. The device will beep, then immediately long press the device button for eight seconds until the device beeps for the second time and the indicator light flashes. Release the button, Factory Reset is completed.
   (Note: after long pressing the device button for 2 seconds, the device will sound “tick, tick, tick”, and the indicator light near the button flashes. Do not release it. Continue to press and hold the button until the device emits music for the second time and the indicator light flashes. Release the button).

3. Pair with Find my app.

Quick instructions

1. Turn on the device
   Press and hold the button for 5 seconds, the device will beep and turn on.

2. Pair the device
   • Open the Find My app.
   • Hold the device close to your iPhone, tap the Items tab, tap + and then Add Other Item.
   • Tap Connect.
   • Type a name for your device, and select an emoji.
   • Tap Agree to acknowledge that this item will be linked to your Apple ID.
   • Tap Finish.

3. Enable Lost Mode
   • Open the Find My app, tap the Items tab, then tap your item.
   • Under Lost Mode, tap Enable.
   • Read the instructions, tap Continue and enter a phone number or email address.
   • Confirm the information, customize the lost message, and tap Activate to complete the setup.

4. Remove the device
   • Open the Find My app, tap the Items tab, then tap your item.
   • Tap Remove Item and then tap Remove to complete the operation.

Note: After removing the device in the app, the device will beep and the light will flash six times, it will not shut down and will be in the pairing mode. If there is no re-pairing within 10 minutes, the device will leave the pairing state, and the device and app cannot be paired at this time. If you need to pair the device, you need to click the device button once, the device will ring and the light will flash once. At this point, the device enters the pairing state and can be re-paired with the app.

Main Functions

1. Locate your item
   If your missing item isn’t nearby, the Find My app can still help you track it down using the Find My network — hundreds of millions of iPhone, iPad, and Mac devices around the world. Nearby devices securely send the location of your missing device to iCloud, then you can see where it is in the Find My app. It’s all anonymous and encrypted to protect everyone’s privacy.

2. Play Sound
   • Open the Find My app, tap the Items tab, then tap your item.
   • Click Play Sound and the device will beep, so you can find the item easily.

Instructions for device button

1. Power on
   After installing the battery, long press the button for five seconds, the device will beep, the light will flash three times, and the device will be turned on.

2. Device status confirmation
   Double-click the device button, the device will beep, and the light will flash three times, indicating that the device is working. If the device does not ring, the device is off.  Long press the button for five seconds to turn it on.

3. The device enters the pairing state again
   After removing the device in the app, the device will beep and the light will flash six times, it will not shut down and will be in the pairing mode. If there is no re-pairing within 10 minutes, the device will leave the pairing state. If you want to pair a device at this time, you need to click the device button once, the device will beep, and the light will flash once. At this time, the device enters the pairing state and can be paired with the app again.

4. Factory Reset
   First, remove the item from the Find My app then, after the device is powered on, double-click the device button. The device will beep. Long press the device button for eight seconds until the device beeps and the light flashes three times. Release the button to complete the factory reset.
   The device can now be paired.

5. Power off
   When the device is on, press the device button 5 times in 2 seconds. The device will beep, the light will flash three times, and the device will be powered off.

FAQ:

1. When can the device be located?
   When an item is separated from its owner for a period of time, it can be found by other Apple devices that are part of the Find My network, and the owner can start to get  the location of the device.

2. How to confirm whether the device has been turned on?
   Double-click the device button, the device will beep, and the light will flash three times, indicating that the device is working. If the device does not ring, the device is off.  Long press the button for five seconds to turn it on.

3. How is the device designed to discourage unwanted tracking?
   If any Find My network accessory separated from its owner is seen moving with you over time, you’ll be notified in one of two ways:
   1. If you have an iPhone, iPad, or iPod touch, Find I will send a notification to your Apple device. This feature is available on iOS or iPadOS 14.5 or later.
   2. If you don’t have an iOS device or a smartphone, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when it’s moved. These features were created specifically to discourage people from trying to track you without your knowledge.

4. How is my privacy protected?
   Only you can see where your item is. Your location data and history are never stored on the item itself. Devices that relay the location of your item also stay anonymous,  and that location data is encrypted every step of the way. So not even Apple or Micflip Finder knows the location of your device or the identity of the device that helps find it.

5. How to replace the battery:

1. Open the device from the notched side.
2. Replace the battery with a new one. (Positive pole upward).
3. Assemble the device and long press the button for 5 seconds to restart it.
   

6. What is the Find My network? And how does it work?
   The Apple Find My network provides an easy, secure way to locate compatible personal items on a map using the Find My app on your iPhone, iPad, iPod touch, Mac, or the Find Items app on your Apple Watch. Simply pair your compatible product with the Apple Find My app to view it right alongside your Apple devices. If your item ever goes missing, you can put it in Lost Mode to display a message and contact information to anyone who might find it. The Find My network is encrypted and anonymous, so no one else, not even Apple or Micflip Finder, can view its location.

Regulatory Safety Information

WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN
Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus.
If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poison Information Centre for fast expert advice.

KEEP BATTERIES OUT OF REACH OF CHILDREN

• Keep in original package until ready to use
  Call a local poison control center for treatment information. Australia: 13 11 26 Canada: 1-800-268-9017(Ontario), 1-800-567-8911(BC), 1-800-463-5060 (Quebec) US: 800- 498-8666.Verify suitably. emergency call numbers for your country.

• Do not use if the compartment is not secure.

• Dispose of used button batteries promptly and safely. Flat batteries can still be dangerous.

Risk of fire and burns.
Do not recharge, disassemble, heat (-20°C +70°C)or incinerate.
Rated voltage 3V

Legal notice
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Watch, iPad, iPad, iPod touch, Mac, macOS, and watchOS are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Any problems or suggestions, please contact :
trangjan@trangjan.com. Or WhatsApp.
Scan this QR code using the WhatsApp camera to add us on WhatsApp
Service WhatsApp: +86-18902616101

http://www.micflip.net
https://wa.me/message/SZXSISOSKBDXH1?src=qr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>