STEALTH CAM Fusion Cellular – Verizon Brown Instruction Manual
- June 5, 2024
- STEALTH CAM
Table of Contents
- STEALTH CAM Fusion Cellular – Verizon Brown
- Camera Overview
- Camera Accessories (Not included)
- About Your Camera
- Quick Setup Guide
- Camera Setup
- LED Indicator Codes
- Software Update Guide
- Mounting Guide
- Camera Configuration
- Camera Care
- Frequently Asked Questions
- Video
- FCC COMPLIANCE
- Limited Warranty Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
STEALTH CAM Fusion Cellular – Verizon Brown
Fusion ® Instruction Manual
Powered by Stealth Cam COMMAND PRO, available on iOS
and Android, or on the web at
www.stealthcamcommand.com
Notice
To ensure the product is being utilized to its full potential, we recommend
checking the Stealth Cam COMMAND PRO app for new product updates. If your
camera is having an issue, please check Stealth Cam COMMAND PRO to determine
if you are using the latest software version.
Camera Overview
QR and IMEI Label
Camera Accessories (Not included)
Pair these Stealth Cam accessories with your Fusion ® camera to maximize your camera’s utility.
| Tree Screw Mounts: Versatile screw-in mount allows you to secure your
trail camera at various heights and angles for the desired field of view.
---|---
| Solar Power Panel: Efficiently powers your camera in all weather
conditions including cloudy days. The Solar Power Panel uses a built-in
rechargeable lithium-ion battery to provide maintenance-free operation and
prevent the natural drain of batteries over time.
| 6′ Python Lock Cable: Keep your trail camera safe from theft with this
Master Python lock. The Cut-resistant 6′ x 5/16″ braided steel cable a distant
finish.
About Your Camera
| Remote Cellular Connection
Access your camera from any location with on-the-go remote access through our
COMMAND PRO app.
---|---
| Powered by Stealth Cam COMMAND PRO
Control your camera on iOS or Android, or on the web at
www.stealthcamcommand.com.
| Retina Advanced Lowlight Sensitivity
Enhanced low light performance for extended nighttime coverage and range.
| Reflex < 0.4 Second Trigger
Ultra-fast trigger speed, never miss a crucial moment.
| Matrix Blur Reduction Technology
Advanced blur reduction dramatically reduces blur effects resulting in
sharper, clearer images.
| Geo-Tag GPS Meta-Tagging
Track and recall all your favorite locations with optional GPS tagging.
| Multi-Zone Detection
Covers multiple zones of angle and distance, maximizing the camera’s
triggering accuracy.
| Burst Rapid-Fire Mode
Rapid-fire Burst Mode, 1-6 exposures per triggering.
Quick Setup Guide
| Download the “Stealth Cam COMMAND PRO” app on iOS or Android
Navigate to the Google Play Store/iOS App Store and Install “Stealth Cam
COMMAND PRO” by Good Sportsman Marketing.
---|---
| Create a Stealth Cam Account and Sign In
Open the app and follow on-screen guides to set up your Stealth Cam Account
and sign in to app.
| Add Your Device
Press the plus sign in the top left corner of the app to begin a new device
setup. Access your QR code underneath the battery tray. Follow the directions
on-screen to set up your camera and data plan.
| Configure Your Camera
Tap on your camera within the app and select “Camera Setup” to begin
customizing your camera settings. Or, use our default configuration for a
quick setup. Alternatively, use
www.stealthcamcommand.com for camera
configuration.
Camera Setup
Battery Installation
Open the camera and lift out the battery tray by the notches provided. With
the tray removed, insert 8 new AA batteries, being careful to match the
orientation marked on the tray. After batteries are inserted, align metal
contacts and reinsert the battery tray into the camera. If you are using an
external power source, ensure that it is 12V. Other voltage levels could
damage your camera. NOTE: Do not mix new and old batteries or alkaline and
lithium batteries.
SD Card Installation
The SD card slot is located on the left side of your camera. A class 10 SD
card is recommended, use of a different card may result in unexpected results.
Insert SD card with the label facing you, as shown in the diagram on the left.
When inserting an SD card you should only feel minimal resistance and a click
when the card is fully inserted.
Antenna Installation Screw on the device antenna until it is hand-tight.
The antenna must be screwed tight to ensure the camera is sealed from water.
Be careful that the antenna is not overtightened.
Power On and Check Status Power on your camera to automatically begin the
sync. After the sync is complete, press the SYNC button at any time to take
and upload a test photo to ensure your camera is functioning properly.
LED Indicator Codes
Test your camera connection at any time by pressing the SYNC button. The SYNC button will take a test photo and instantly attempt to upload it. If your camera is successful you will see the photo appear in the COMMAND PRO app. Otherwise, one of the following LED codes will display.
Successful Connection Sequence
| A flashing green Battery indicates checking the camera hardware status.
---|---
| A solid green Battery and flashing Network indicate checking the camera for
internet connection.
| A solid green Battery, Network, and flashing Account indicates checking the
camera for an account.
| 3 Solid LEDs indicate account found and the camera is successfully
registered.
| All 3 LEDs will blink green to indicate a photo upload in progress. LEDs
will turn off to indicate the camera is asleep and ready for deployment.
LED Status Codes
| Solid Red Battery indicates low battery or no SD card.
---|---
| A solid green Battery and solid red Network indicate no SIM card, low
signal, or no data plan.
| Solid green Battery, Network, and solid Red Account indicate no account
found.
Other LED Codes
| 3 alternating flashing red LEDs and 3 green LEDs indicate a software update
is
available. A brief press of the SYNC button starts the software update. After
10 seconds, normal sync starts.
---|---
| 3 flashing red LEDs indicate that the software is updating. Do not disturb
the camera as the update completes.
| Solid 3 red LEDs indicate the software update is complete. Remove and
reinsert
batteries.
Software Update Guide
To ensure the product is being utilized to its full potential, we recommend
checking the Stealth Cam COMMAND PRO app for new product updates.
Over-the-Air Upgrade
| When a software update is ready, your LEDs will alternate flashing red and
green. Press the SYNC button on your camera to begin the upgrade.
---|---
| While the update is in progress, all 3 LEDs will flash red. Do not disturb
or press any buttons on the camera while this is in place.
| 3 solid red lights indicate that the upgrade is complete. The camera will
automatically restart once the update is complete.
SD Card Local Upgrade
This method will allow you to upgrade your software without the use of data.
- Clear all files from your SD card, download software upgrade from www.stealthcamcommand.com, and insert the SD card into the camera.
- The camera will automatically detect new software and begin the process as defined above.
- If the camera does not detect new software, remove the SD card and verify that the only file present on your card is the software update file.
Mounting Guide
With the included mounting strap, you are able to mount your Fusion ®
camera to a vertical surface. To ensure that you receive optimal performance
with your Fusion ® camera, use the following guide to set your camera up to
our specifications.
An optimal camera will be set:
i. 3 ft 4 ft off the ground
ii. North Facing
iii. Angled slightly downward
The Fusion ® camera has a Field of View of 52° diagonal, with a PIR sensing
range of 80 ft.
Antenna Guide
For optimal network reception with your Fusion ® camera, use the following
antenna placement guide:
i. Mount the camera away from any type of metal.
ii. Antenna should be vertical from the camera as seen in the image on right.
iii. As much as possible, the antenna should be away from obstructions.
iv. Ensure the antenna is screwed in tight so a proper connection is made.
Camera Configuration
After your camera has been added through the Stealth Cam COMMAND PRO mobile
app, setup for your Fusion ® camera will happen entirely in the Stealth Cam
COMMAND PRO app or on the internet at
www.stealthcamcommand.com.
To begin setup, first, make sure you have created a Stealth Cam account and
have purchased a cellular data plan. After signing into the app, navigate to
the Camera Setup options screen by tapping on your camera in the app.
In the app, we offer 3 Quick Setup options based on our most popular
configurations.
Name | Quality | Timeout | Detail |
---|---|---|---|
QSET 1 | 8.0 MP | Delay | 3 Photos |
QSET 2 | 8.0 MP | The 30s | 1 Photo |
QSET 3 | 720P | The 30s | 10s Video |
You are not able to edit our provided QSETs. For alternate custom
configurations, read on for more information.
Visit our mobile app Stealth Cam COMMAND PRO or
www.stealthcamcommand.com to manage your
Stealth Cam data plan and receive additional information regarding plan
options.
Camera Settings
TIME ZONE: This setting allows you to set your camera to different time
zones.
OPTIONS: Eastern | Central | Mountain | Pacific | Alaskan | Hawaiian
TIME FORMAT: This setting is used by the camera to change the display
format for the time in the Info Bar of the image.
OPTIONS: 12 hr | 24 hr NOTE: If 24-hour format is selected, previous
SETUP TIME will be adjusted and AM/PM will be removed
OPERATION MODE: This setting will change the operation mode of the
camera. Different operation modes will have different adjustment settings.
OPTIONS: PIR Photo | PIR Video
PHOTO RES: This setting will determine the megapixel (MP) resolution of
each image. A higher MP count will result in better photos and take more
memory space.
OPTIONS: 4 MP | 8 MP | 16 MP | 26 MP
VIDEO RESOLUTION: This setting will determine the quality of each video.
Higher quality will result in better videos and take more memory space. Video
records at 1280 x 720
PIR DELAY: This setting is used to determine how long the camera will
wait before reinitializing the PIR sensor after taking a photo.
OPTIONS: 00m 03s 59m 59s
PHOTO BURST: This setting determines how many photos are taken each time
the camera is activated.
OPTIONS: 1 photo 6 photos
NOTE: When the resolution is set to 26 MP, Max Photo Burst is 3 Photos
REDUCE BLUR: This setting is used to determine if the camera should use
the MATRIX Blur technology to dramatically reduce the blur effect, resulting
in more clear nighttime infrared shots.
OPTIONS: STANDARD: Minimize blurring effect in images while retaining
long-range night image capability.
ADVANCED: Enhanced blur reduction providing a balance between brightness
and image sharpness.
CAMERA NAME: This setting is used to adjust the camera name. The camera
name can be up to 13 characters long using alpha (A-Z) numeric (0-9)
characters.
DVR MODE: This setting allows you to continuously record new images.
Turning this setting ON will continuously delete the oldest recorded files to
make space for new files. When turned OFF, the camera will stop recording new
files when the SD card reaches capacity.
OPTIONS: On | Off
TEMPERATURE: This setting is used to change the temperature format on
Info Bar.
OPTIONS: Fahrenheit | Celsius
LONGITUDE and LATITUDE: This setting allows you to manually enter the
longitude and latitude of your camera.
OPERATING HOURS: This feature allows you to designate a time for the
camera to be active.
OPTIONS: 24/7: The camera is always on
SCHEDULED: Selecting this will allow you to enter a time range for the
camera to be active and operational. The camera will not take photos outside
of the defined time range.
START TIME (HH: MM): Start time for the camera to be active
END TIME (HH: MM): The time at which you want the camera to no longer be
active
INFORMATION BAR: This setting is used to tell the camera whether the Info
Bar should be displayed at the bottom of the images.
OPTIONS: On | Off
VIDEO LENGTH: This setting is used to determine the length of time, in
seconds, of a video recording OPTIONS 10 sec
ERASE CARD: This setting is used to format the SD memory card installed.
Formatting your SD card will ERASE ALL DATA PRESENT.
NOTE: After the card is formatted it is impossible to restore data that
was present on the card.
Cellular Settings
TRANSMIT FILES: This setting allows you to turn your data transmission on
and off. While data transmission is off, no photos will be sent on your
cellular data plan.
OPTIONS: On | Off
UPLOAD FREQUENCY: This setting changes how often photos are uploaded to
your phone.
NOTE: This setting has a large effect on your Data and Battery usage.
OPTIONS: INSTANT (Least Efficient): As soon as your sensor detects motion
it will take a photo and upload it.
INSTANT GROUP: Similar to instant, if motion is detected within 10
seconds of the original photo, the camera will continue to take photos until
motion ceases before uploading.
HOURLY: The camera will upload photos every hour.
TWICE PER DAY: The camera will upload twice per day, based on upload
time. i.e. If the upload time is set to 5:00 PM, the camera will upload at
5:00 AM and 5:00 PM
ONCE PER DAY (Most Efficient): The camera will upload photos once per
day, based on upload time.
UPLOAD TIME: This setting will allow you to set the time that you would
like your camera to upload photos.
NOTE: Your camera will take a Daily Test Photo each day at the set Upload
Time. This photo will be indicated with a “D” in the info bar.
IMEI: This number is used to reference your physical camera.
ICCID: This number is used to reference your camera’s SIM card.
Camera Care
Operating Conditions
This camera is designed to function in 14°F – 104°F (-10°C – 40°C) with
20%-85% relative humidity, non-condensing.
Product Care
- When not in use, store the camera in a cool, dust-free, environment.
- Handle the camera with care.
- The camera is weather-resistant only. Do not fully submerge the camera in water or other liquid. Doing so will void the camera warranty.
- Only use the same type of battery to power the camera. Do not mix old and new batteries.
- Do not touch the camera lens directly. Clean only with a soft lens cloth.
- Use a damp cloth to clean. DO NOT submerge the camera.
- Remove batteries when the camera is not in use for an extended time.
- Do not open the camera housing to access internal parts. Doing so could damage the camera and void the warranty.
Notice
The camera is an active electronic device. Attempting to service internal
parts may expose you to dangerous voltages and other risks.
Frequently Asked Questions
General Troubleshooting
Q: What does formatting my SD card do?
A: Formatting your SD card will PERMANENTLY ERASE all files present on your
card. Formatting a card can resolve a variety of odd errors that may be
preventing your camera from working properly and should be used as one of the
first troubleshooting steps.
Images already uploaded to the COMMAND PRO app will NOT be affected.
Q: How do I format my SD card?
A: To format your card, first power off your camera and wait 10 seconds. Hold
down the SYNC button, and power on your camera. Continue holding the SYNC
button until you see all 3 LEDs flash red, at this point your card will be
formatted.
Q: I was receiving photos before, and I am not anymore.
A: This could be caused by several things. First, press the sync button and
ensure all 3 LEDs light up green, if an LED shows red, see below. Next, log
onto your COMMAND PRO account and make sure your camera is in an ACTIVE status
on a cellular plan. If the above does not resolve your issue, please call
support at 1.888.508.5922 for further assistance.
General Troubleshooting (cont.)
Q: Why is my battery LED ( ) showing red?
A: Your battery LED indicates that there is a hardware issue with your
batteries or your SD card. To resolve this issue, place fresh batteries in
your camera and/or format your SD card.
Q: Why is my network LED ( ) showing red?
A: Your network LED indicates that there is an issue with your camera
connecting to our app over the AT&T or Verizon network. Please first ensure
your camera is attached to a cellular data plan, then ensure you are in a
location with strong 4G cellular service with your camera’s carrier.
Occasionally, this issue can also be solved by formatting your SD card and
removing and reinserting your SIM card.
Q: Why is my account LED ( )showing red?
A: Your account LED indicates that there is an issue with your camera
connecting to your Stealth Cam COMMAND PRO account. Please ensure that you see
your camera on your account in the app and that the IMEI and ICCID numbers on
your QR code sticker match what is seen in the app.
Camera Hardware
Q: Will I lose my images and settings if the batteries die?
A: No, the images are stored on your external SD memory card so your images
will be intact only on your card. Your settings are saved on your app.
Q: Why is my camera taking pictures with nothing in front of it?
A: This camera is powered by motion activation. This can cause objects, like a
tree branch or moving water, within the camera frame to cause the camera to
take a photo.
Q: Is my camera waterproof?
A: No, your camera is weather resistant but not waterproof.
Q: Is there a warranty that comes with my camera or an extended warranty I
can purchase?
A: Your Stealth Cam Camera comes with a Limited 1-year warranty. Please
contact support at 1.888.508.5922 for more information.
Q: Can I mix batteries together?
A: No, you should never mix batteries. After your camera batteries die, always
install brand new batteries in your camera.
Q: Can I use rechargeable batteries in the camera?
A: Rechargeable batteries will cause incorrect battery percentages for the
camera in the app. We do not recommend using rechargeable batteries.
Stealth Cam COMMAND PRO and Cellular
Q: Do I need to have my phone next to my camera while it syncs?
A: No, you can sync your camera remotely from your phone. However, we
recommend syncing in the proximity of your phone to verify sync was
successful.
Q: I have a new phone. Is it necessary to re-sync the camera or will it
still be displayed once I download the App?
A: It is not necessary to re-sync your camera to your new device. Your camera
will be displayed on your account once you download the “Stealth Cam COMMAND
PRO”
app and log in with your credentials.
Q: My camera showed that it synced successfully, why do I not see it on my
app?
A: In order to connect to our app, your cell phone will need to have 4G/LTE
reception or a Wi-Fi connection. If you are in a remote location, there is
likely not enough data
coverage to properly use our app.
Q: Why does my monthly bill higher than my plan cost?
A: You have likely incurred data overages. Data charges are incurred after you
reach your plan’s allotted data limit. For more information on rates visit
www.stealthcamcommand.com.
What is the difference between the Fusion Cellular and Fusion Cellular Brown?
The Fusion Cellular Brown is a new model that has been designed to be more discreet. It features a brown camouflage pattern on the camera housing, and a brown strap that attaches to the tree.
Does the Fusion Cellular Brown come with a brown strap?
Yes, it does.
What are the dimensions of the Fusion Cellular Brown?
The dimensions are 4.5″ x 4.5″ x 3″.
What is the battery life of the Fusion Cellular Brown?
The battery life is up to 12 months in standby mode, and up to 6 months when actively taking pictures or videos.
How do I change out the SD card in my Fusion Cellular Brown?
You can change out your SD card by removing the back panel of your camera. To do this, you will need to unscrew two screws on the bottom of your camera using a Phillips head screwdriver. Once you have removed these two screws, you can slide off your camera’s back panel. To insert or remove an SD card, simply slide it into or out of the SD card slot until it clicks into place. You can then reattach your back panel by sliding it back onto your camera and replacing the two screws you removed earlier.
Video
To ensure optimal performance of your Stealth Cam camera, it is best to always check for periodical free software updates on Stealth Cam COMMAND PRO or at www.stealthcamcommand.com.
FCC COMPLIANCE
GSM, LLC
STC-FATWX V2
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
IC WARNING
This device contains license-exempt transmitter(s) that comply with
Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. This equipment meets the exemption from the routine evaluation limits in the section of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
Product specifications are subject to change. Good Sportsman Marketing, LLC is
not responsible for any photographic or typographical errors.
May be protected by one or more U.S. Patent numbers: 6,735,387 / 6,768,868 /
6,834,162 / 7,149,422 / 7,308,196 / 7,593,632 / 7,710,457 / 8,895,926.
Limited Warranty Information
Your Stealth Cam scouting camera is covered by a 365 Day Limited Warranty on
parts and labor from the date of original purchase, and purchases must be made
through an authorized dealer. The warranty covers defects in workmanship and
materials. The warranty does not apply to units, which have been damaged or
abused intentionally or unintentionally. Purchase from individuals or
unauthorized Internet sites such as eBay voids the warranty.
Tampering with or altering the unit will void the warranty.
Any unauthorized service will void the warranty.
A copy of your original sales receipt must be produced for any warranty
service and a Return Authorization (RA) Number must be obtained from customer
service at 1.888.508.5922 prior to returning the product. Stealth Cam is not
responsible for any lost untraceable packages or those without a Return
Authorization at the time of return.
Contact Us
TECHNICAL SUPPORT EMAIL:
wirelesstechsupport@gsmorg.com
Please allow 48 hours for an email response.
GSM, LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504
CUSTOMER SERVICE CONTACT & HOURS
Toll-Free: 1.888.508.5922
CALL CENTER HOURS
Mon Fri / 8 AM 5 PM (CST)
WEBSITE
www.stealthcam.com
www.stealthcamcommand.com