STEALTH CAM Fusion X Pro Cellular Trail Camera User Guide

STEALTH CAM Fusion X Pro Cellular Trail Camera

Product Information

Specifications

• Camera Resolution: 36 Megapixel
• Video Resolution: 720p
• Trigger Speed: 0.4 SEC
• Interface: Streamlined
• Photo Burst: 1-3 photos per trigger
• Networks: Dual Networks

About Your Camera
The Fusion X Pro camera is a high-resolution camera with advanced features designed for wildlife and surveillance applications. It offers a 36-megapixel camera resolution and can record videos in 720p resolution. With a trigger speed of 0.4 seconds, you can capture fast-moving subjects without missing any action. The camera has a streamlined interface for easy setup and operation.

The Fusion X Pro camera also comes with the Command Pro app, developed by GSM, LLC. This app allows you to access your camera’s images from any device with cloud storage. It features animal recognition, allowing you to filter and sort images by animal. You can also remotely adjust your camera settings and access new filters in the photo gallery. The camera supports over-the-air updates, ensuring that you always have the latest features and improvements.

Product Usage Instructions

Get the Stealth Cam COMMAND PRO app
Download and install the Stealth Cam COMMAND PRO app developed by GSM, LLC on your device.

Create an account
Open the app and follow the on-screen guides to set up your account. This will allow you to access your camera’s images and control its settings remotely.

Screw on the antenna
Attach the provided antenna to the camera by screwing it on. Hand-tighten the antenna enough to create a water-tight seal.

Install batteries and SD memory card
Insert batteries into the battery tray following the correct polarity. Make sure not to mix different types of batteries or old and new batteries. The camera supports Class 10 SD cards up to 32GB in size. Insert the SD card into the designated slot.

Cellular Setup
After completing the initial setup, you need to pair your camera with your account using the SYNC button. Press the SYNC button on your camera, and it will flash in sequence as it pairs to your account. Each light will turn solid green when they are successfully paired. If any light turns red, refer to the error codes below for possible causes.

LED Status Guide

• Flashing Green Battery: Checking hardware & battery status
• Flashing Green Network: Checking for internet connection
• Flashing Green Account: Checking for account

Error Codes

• Solid Red Battery: No SD card, low battery, SD larger than 32GB
• Solid Red Network: No SIM card, loose SIM card, weak signal, no active data plan
• Solid Red Account: No account was found
• All LEDs Flashing Red: The software is updating. Do not turn off the camera during updates.

Test Your Camera Connection
To test your camera’s connection, press the SYNC button. This will take a test photo and attempt to upload it instantly. If the upload is successful, the photo will appear in your Command Pro app.

Camera Settings
Adjust the camera settings to suit your preferences. Here are some available settings:

• Photo Burst: Choose how many photos are taken when the camera is triggered.
• PIR Delay: Set the time interval to wait before the camera can be triggered again.
• Photo Resolution: Adjust the quality of each image. Higher quality will result in better photos but take more memory space.
• Reduce Blur: Adjust the MATRIX Blur technology to reduce the blur effect in night-time infrared shots.
  • Standard: Minimizes blur while keeping long-range night image capability.
  • Advanced: Enhances blur reduction, providing a balance between brightness and image sharpness.
• PIR Sensitivity: Control the camera’s range of detection. Higher sensitivity allows for a further range of detection.
• Camera Name: Give your camera a name to display on the Info Bar.
• DVR Mode: Enable or disable continuous recording of new images. When enabled, the camera will continuously delete the oldest recorded files to make space for new files.

FAQ

• Q: What type of batteries does the Fusion X Pro camera support?
  A: The camera supports alkaline, standard (carbon-zinc), or rechargeable batteries. However, do not mix different types of batteries or old and new batteries.

• Q: Can I use an SD card larger than 32GB?
  A: No, the camera supports Class 10 SD cards up to 32GB in size.

• Q: How can I reduce false triggers caused by moving grass and tree branches?
  A: Lowering the PIR sensitivity will reduce the occurrence of false triggers caused by moving grass and tree branches.

WHAT’S IN THE BOX

ABOUT YOUR CAMERA

COMMAND PRO APP

• Dedicated Cloud storage access images from any device
• Animal Recognition Filter and sort by animal
• Remote Camera Settings Adjust your camera settings from anywhere
• Photo Gallery Filters New filters to sort and find your pictures
• Over-the-Air Updates Your camera will keep itself up-to-date with new features

CAMERA FEATURES

• 36 Megapixel
• 720p Video Resolution
• 0.4 Sec Trigger Speed
• Streamlined Interface One button setup with SYNC
• On-Demand Images or Videos via the app
• Dual Networks Automatically connect to the network with the strongest signal
• Matrix Blur reduction technology
• 1-3 Photo Burst Multiple images per trigger

GET STARTED

1. Get the Stealth Cam COMMAND PRO app
   by GSM, LLC

2. Create an account
   Open the app and follow the on-screen guides to set up your account.

3. Screw on the antenna
   Hand-tighten your antenna enough to create a water-tight seal.

4. Install batteries and SD memory card

   • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
   • Do not mix old and new batteries.
   • Supports Class 10 SD cards up to 32GB.

CELLULAR SETUP

LED STATUS GUIDE
Press SYNC. Your camera will flash in sequence as it pairs to your account.

Each light will turn solid green when they are successful. If a light turns red, use the following error codes for possible causes.

ERROR CODES

• All LEDs Flashing Red: The software is updating. Do not turn off the camera during updates.

TEST YOUR CAMERA CONNECTION
By pressing the SYNC button. This will take a test photo and instantly attempt to upload it. If successful, the photo will appear in your Command Pro app.

CAMERA SETTINGS

• PHOTO BURST: Choose how many photos are taken when the camera is triggered.
• PIR DELAY: How long to wait before the camera can be triggered again?
• PHOTO RESOLUTION: The quality of each image. A higher quality will result in better photos and more memory space.
• REDUCE BLUR: Adjusts the MATRIX Blur technology to dramatically reduce the blur effect, resulting in more clear night-time infrared shots.
  • STANDARD: Minimize blur, while keeping long-range night image capability.
  • ADVANCED: Enhance blur reduction providing a balance between brightness and image sharpness.
• PIR SENSITIVITY: Control the camera range. Higher sensitivity allows a further range of detection. Note: Lower PIR sensitivity will reduce the occurrence of False Triggers such as moving grass and tree branches.
• CAMERA NAME: Give your camera a name to display on the Info Bar.
• DVR MODE: This setting allows you to continuously record new images.
  • ON: continuously delete the oldest recorded files to make space for new files.
  • OFF: stop recording new files when the SD card reaches capacity.
• OPERATING HOURS: Choose a specific timeframe for the camera to be active.
  • 24/7: The camera is always on.
  • SCHEDULED: Enter a time range for the camera to take photos.
  • START TIME (HH: MM): Start time for the camera to be active.
  • END TIME (HH: MM): End time for the camera to be active.
• ERASE CARD: Format the SD memory card. Formatting your SD card will ERASE ALL DATA PRESENT. After the card is formatted it is impossible to restore data that was present on the card.

CELLULAR SETTINGS

• ON DEMAND: Enables the camera to take On-Demand Captures from within the app. NOTE: this greatly reduces battery life.
• TRANSMIT FILES: Turn your data transmission on and off. While data transmission is off, no photos will be sent on your cellular data plan. The camera will still check in once a day on your daily upload time for setting updates.
• UPLOAD FREQUENCY: Change how often photos are uploaded to your phone. This setting has a large effect on your Battery and Data usage. Note: When using the app to change settings, the camera will receive those changes the next time it is scheduled to upload.
  • INSTANT: The camera takes a photo and uploads it every time it senses motion.
  • INSTANT GROUP: If motion is detected within 10 seconds of taking a photo, the camera will continue to take photos until motion ceases before uploading that batch.
  • HOURLY: Upload photos every hour.
  • TWICE PER DAY: Upload photos twice per day, based on upload time. Note: if the upload is set to 5:00 PM, the camera will upload at 5 AM and 5 PM.
  • ONCE PER DAY: Upload photos once per day, based on upload time.
  • UPLOAD TIME: Set the time for your camera to upload photos.
  • NOTE: your camera will take a daily test photo each day at the set upload time. This photo will be indicated with a “D” in the info bar.
• IMEI: This number is used to reference your physical camera.
• ICCID: This number is used to reference your camera’s SIM card.

FCC STATEMENT

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:
Changes or modifications not expressly approved by the party responsible could void the user’s authority to operate this device.

IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment meets the exemption from the routine evaluation limits in the section of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Product specifications are subject to change. Good Sportsman Marketing, LLC is not responsible for any photographic or typographical errors.

May be protected by one or more U.S. Patent numbers: 6,735,387 / 6,768,868 /6,834,162 / 7,149,422 / 7,308,196 / 7,593,632 / 7,710,457 / 8,895,926.

SUPPORT

Please complete your warranty registration online:
www.gsmoutdoors.com/product-warranty-registration.

Scan for warranty information, product support, & FAQ

CONTACT US

TECH SUPPORT EMAIL

• [email protected] Please allow 48 hours for an email response.

CUSTOMER SERVICE

• Toll-Free: 1.888.508.5922 Mon – Fri / 8 AM – 5 PM (CST)

GSM, LLC
P.O. Box 535189
Grand Prairie, Texas 75053

References

• Product Warranty Registration - Register Your Purchase - GSM Outdoors

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>