STEALTH CAM STC-BT14 Brown Tine Game Camera Instruction Manual

STEALTH CAM STC-BT14 Brown Tine Game Camera Instruction Manual

Notice

To ensure the product is being utilized to its full potential, we recommend checking our website for new product updates. If your camera is having an issue, please check our website to determine you are using the latest firmware or software version.

Contact Us

TECHNICAL SUPPORT
EMAIL:
stealthcam@gsmorg.com
Please allow 48 hours for email response.

GSM, LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504

CUSTOMER SERVICE
CONTACT & HOURS
Toll Free:877-269-8490

CALL CENTER HOURS
Mon – Fri / 8 AM – 5 PM (CST)

WEBSITE
www.stealthcam.com

About Your Camera

60 Foot Detection and Flash Range
See farther with long-distance PIR sensor and LEDs.

0.7 Second Trigger Speed
Never miss a shot with lightning fast 0.7 second trigger speed.

Quick Set Options
Set up in seconds with pre-programmed options.

Burst Rapid-Fire Mode
Rapid-fire Burst Mode, multiple exposures per triggering.

18 IR LEDs
Perfectly illuminate your nighttime photos with 18 IR LED lights.

Quick Setup Guide

Insert Batteries and SD Card

Install 8 AA batteries and a class 10 SD card into camera

Mount Camera

Mount the camera at the desired location using the strap mount, Python Lock cable, Articulating Ball Joint Mount, or other desired mounting mechanism. Position the camera so that it does not face East or West directly as the rising and setting of the sun can cause false positive triggers.

Activate Camera

Set camera to desired Quick Set (QSET) or to custom configuration and place in desired vantage point to start capturing photos of game.

Camera Overview

Camera Setup

Battery Installation

To remove batteries from unit, simply open camera and slide the battery release switch to the left. Once the battery compartment is open, insert batteries into camera, being careful to match the orientation marked on your camera. After batteries are inserted, close the battery compartment and secure the battery release switch.

SD Card Installation

SD card slot is located on the bottom of the camera, above the battery compartment. Insert SD card with the label facing back of camera. Only minimal resistance should be felt as card is inserted and a click when the card is fully inserted.

Camera Configuration

This camera features 4 distinct modes of operation:

QSET 1 | QSET 2 | QSET 3 | CUSTOM |.

Each setting is activated based upon the position of the switch inside the unit.

Quick Sets

Once selected, the screen will display the Quick Set (QSET) that has been chosen and then count down from 9 to 0 seconds. When countdown has been completed camera is ready and in an active state.

See table for breakdown of Quick Set modes.

Custom Configuration

The CUSTOM setting on your camera allows you to customize every setting to fit your exact needs. To begin, move the slider to the CUSTOM position and press the menu button on the camera.

Once inside the custom settings menu, use the Up and Down arrows to scroll through the different settings. To change a setting that is displayed, press the Enter key and the setting will begin flashing. At this point use the Up and Down arrows to change the setting. When finished press the Enter button to save the change or press Menu to cancel change.

When you are finished configuring your camera’s settings, press the Menu button to return your camera to an active state.

Camera Configuration cont.

Viewing and Deleting Images

There are a few methods for viewing and deleting your files.

i. Using an SD Memory Card Reader/Viewer : You will simply need to remove the SD card from the camera and insert it into the reader to view the files; you can also delete them from this device.
ii. Using your computer : This method requires an SD card slot to be installed to your computer. Please refer to your computer’s Owner’s Manual for the proper way of viewing the files.
iii. Obtain a mobile device adapter : This will allow you to plug one end into the device, and, at the other end, insert the SD card. Please refer to the vendor’s User Manual for the proper way of viewing the files.

Frequently Asked Questions

Q: Will I lose my images and settings if the batteries die?
A: You will lose your settings but not your images. The images are stored on your external SD memory card so your images will be intact only on your card.

Q: Why is my camera taking pictures with nothing in front of it?
A: This camera is powered by motion activation. This can cause objects, like a tree branch or moving water, within the camera frame to cause the camera to take a photo.

Q: Is there a warranty that comes with my camera or an extended warranty I can purchase?
A: Your Stealth Cam Camera comes with a Limited 1-year warranty. Please contact support at 1.877.269.8490 for more information.

Q: Can I mix batteries together?
A: No, you should never mix batteries. After your camera batteries die, always install brand new batteries in your camera.

Q: Can I use rechargeable batteries in the camera?
A: Rechargeable batteries can be used but will cause battery percentage to be reported incorrectly

Camera Care

Operating Conditions

This camera is designed to function in 14°F – 104°F (-10°C – 40°C) 20%-85% relative humidity, non-condensing.

Product Care

• When not in use, store camera in a cool, dust-free, environment.
• Handle camera with care.
• Camera is weather resistant only. Do not fully submerge camera in water or other liquid. Doing so will void camera warranty.
• Only use same type of batteries to power camera. Do not mix old and new batteries.
• Do not touch camera lens directly. Clean only with soft lens cloth.
• Use damp cloth to clean. DO NOT submerge camera.
• Remove batteries when camera is not in use for an extended time.
• Do not open camera housing to access internal parts. Doing so could damage camera and void warranty.

FCC COMPLIANCE

NOTE : This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device.

Product specifications are subject to change. Good Sportsman Marketing, LLC is not responsible for any photographic or typographical errors. May be protected by one or more U.S. Patent numbers: 6,735,387 / 6,768,868 /6,834,162 / 7,149,422 / 7,308,196 / 7,593,632 / 7,710,457 / 8,895,926.

IC WARNING

This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment meets the exemption from the routine evaluation limits in section of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Limited Warranty Information

Your Stealth Cam Trail Camera is covered by a 365 Day Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not apply to units which have been damaged or abused intentionally or unintentionally. A purchase from individuals or unauthorized Internet sites such as eBay voids the warranty. Tampering with or altering the unit will void the warranty. Any unauthorized service will void warranty. A copy of your original sales receipt must be produced for any warranty service and a Return Authorization (RA) number must be obtained from customer service at 877- 269-8490 prior to returning product. Stealth Cam is not responsible for any lost untraceable packages or those without a Return Authorization at the time of return.

References

• Stealth Cam - The Leader In Trail Camera Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>