xantrex 818-2015 Freedom XC PRO Marine Inverter User Guide
- June 5, 2024
- xantrex
Table of Contents
818-2015 Freedom XC PRO Marine Inverter
User Guide
WHAT YOU NEED:
Download the latest firmware version from
www.xantrex.com
Computer | Internet Connection | USB Drive | Access to FREEDOM XC PRO Marine
inverter/charger
STEP 1
On a USB stick, create a folder titled exactly: FreedomX_Firmware
STEP 2
Place both FREEDOM X firmware files fcc. enc and fxcc_manifest.cbor onto the USB stick inside the FreedomX_Firmware folder.
STEP 3
Safely eject the USB from the PC.
STEP 4
Turn off all AC loads and turn off the vehicle engine. Ensure that the inverter/charger remains powered on.
STEP 5
Insert the USB into the inverter/charger unit. Upon inserting the USB stick, the FREEDOM XC PRO Marine inverter/charger LED should flash showing that the USB is recognized and the firmware is being downloaded.
STEP 6
After the LED has stopped flashing, power cycle the inverter/charger (turn the inverter/charger off and on). You should see that the LED has begun flashing again indicating that it is upgrading the FREEDOM X firmware.
STEP 7
After the LED has stopped flashing, use the inverter’s local display to view
the FREEDOM X firmware screen (U3) which should show the new firmware version
XX XX (Press the ‘scroll button’ on the inverter/charger).
Copyright © 2021 Xantrex LLC. All Rights Reserved. All trademarks are owned by
Xantrex LLC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>