IDea BASSO36-A 18 Inch Active Bass Reflex Subwoofer User Guide

: June 5, 2024
: iDea

Table of Contents

IDea BASSO36-A 18 Inch Active Bass Reflex Subwoofer
overview
features
Applications
technical data
technical drawings
warranty

IDea BASSO36-A 18 Inch Active Bass Reflex Subwoofer

Product Information

Specifications

Model: BASSO36-A
Enclosure Design: Active Dual-18 Subwoofer
Amplifier Type: Class-D
Power Output: 3 kW
Power Supply: Universal regulated switch mode
Nominal Power Requirement: 100-240 V 50-60 Hz
Current Consumption: 2.7 A

Features

Active preset options
Cardioid configuration support
DSP for signal processing
Low pass cut settings
Compact design with dimensions: 600 mm x 1200 mm x 740 mm

Applications
The BASSO36-A subwoofer is suitable for various applications including live events, concerts, clubs, and installations where powerful bass reproduction is required.

Product Usage Instructions

Setup

Place the subwoofer in the desired location ensuring proper ventilation.
Connect the power supply to the universal regulated switch mode.
Connect your audio source to the input using appropriate cables.

overview

BASSO36-A is classic design dual 18” Direct Radiation subwoofer that meets all the expectations for this well-known industry standard solution for Touring and large venues and High-SPL applications.
This active subwoofer features an integrated amp module capable of handling up to 3.2 kW and provides a linear response typical of subwoofers from 31 Hz with both deep low frequency response and excellent im-pulse and transient definition. Thanks to a carefully designed and tuned cabined and eight symmetrical front-firing ports that allow for extremely linear excursion of woofers, maximizing their SPL response and minimizing mechanical noises and distortion.
A high-end 24bit @ 48kHz AD/DA integrated DSP board allows for quick and precise adjustments thanks to advanced limiters and FIR filters and 4 selectable Set-up presets.
Like All IDEA Loudspeakers BASSO36-A is built with the necessary structural strength and finish quality required for durable touring use. The high-quality 18 mm birch plywood enclosure coated with IDEA Aquaforce custom paint solution and a 2 mm steel front grille.

features

Compact Dual 18”
Direct Radiation design
Premium European High Efficiency custom IDEA Transducers
3.2 kW Class-D Amplifier (by Powersoft)
Integrated DSP module
Four integrated handles
Rugged and durable 18 mm birch plywood
2 mm Aquaforce coated steel grille with internal protective foam
Durable Aquaforce protective Touring-Grade paint coating

Applications

High SPL A/V portable sound reinforcement
FOH for medium size performance venues and clubs
Main system for Regional Touring and Rental Companies

technical data

Enclosure design	Bass Reflex
Transducers	2×18’’
Class D Amp Continuous Power	3.2 kW
DSP	24bit @ 48kHz AD/DA

4 selectable active LPF cuts

Output

| ****

XLR XLR

AC Connectors| 2×Neutrik PowerCON® (I/O)
Cabinet Construction| 18 mm birch plywood
Grille| 2 mm perforated weatherised steel with protective foam
Finish| Durable IDEA proprietary Aquaforce paint coating process
Handles| 4 integrated handles
Feet/Skates| 4 Skates (V/H)
Installation| 36 mm Pole mount socket (side)
Accessories| 35 mm Pole (K&M-21336) Wheels (WH-04)

COV-B36 (Protective rain cover)

RC-B36 (Protective cover for Power Module)

technical drawings

$IDea-BASSO36-A-18-Inch-Active-Bass-Reflex-Subwoofer-featured $2$$ warnings on safety guidelines

Read this document thoroughly, follow all safety warnings and keep it for future reference.
The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel.
No user serviceable parts inside.
Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
Installations, rigging and suspension operations must be done by qualified personnel.
This is a Class I device. Do not remove Mains connector ground.
Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations.
Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use.
Keep the equipment in the safe working temperature range [0º-45º] at all times.
Disconnect the equipment during lightning storms and when it is not to be used for a long time.
Do not expose this device to rain or moisture.
Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
Clean with a wet cloth. Do not use solvent-based cleaners.
Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
Refer all servicing to qualified service personnel.
This symbol on the product indicates that this product should not be treated as household waste. Follow local regula-tion for recycling of electronic devices.
IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.

warranty

All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices.
The guarantee excludes damage from incorrect use of the product.
Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement.

Declaration of conformity
I MAS D Electroacústica S.L. , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), declares that BASSO36-A complies with the following EU Directives:

RoHS (2002/95/CE) Restriction of Hazardous Substances
LVD (2006/95/CE) Low Voltage Directive
EMC (2004/108/CE) Electro-Magnetic Compatibility
WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
EN 55103-1: 1996 Electromagnetic compatibility: Emission
EN 55103-2: 1996 Electromagnetic compatibility: Immunity

I MÁS D ELECTROACÚSTICA S.L.
Pol. A Trabe 19-20, 15350 – Cedeira, A Coruña (España) Tel. +34 881 545 135
www.ideaproaudio.com
info@ideaproaudio.com
Specifications and product appearance may be subject to change without notice. Las especificaciones y aparienca del prodcuto pueden estar sujetas a cambios.
IDEA_BASSO36-A_QS-BIL_v4.0 | 4 – 2024