IDea OPI40T Professional Installation Speakers User Manual
- June 1, 2024
- iDea
Table of Contents
IDea OPI40T Professional Installation Speakers
Specifications
- Tweeter Woofer Frequency Range +/-3 dB Power Handling RMS
- Sensitivity Coverage Taps
Product Information
OPI Series is a range of outdoor speakers designed for terraces, side pools, small events, and parties. With IP66 protection, ABS polymer cases, and a frequency range starting at 56 Hz, these speakers offer high-quality sound performance in tough outdoor conditions.
Unpacking
When unpacking your OPI speaker, ensure to check for any damages that may
have occurred during handling and report them immediately. Save the custom
cartons and packaging foams for future use.
Speaker Position
For optimal performance, place the speakers on the same wall facing the
listening area, spaced six to fifteen feet apart. To improve stereo image
quality, angle the speakers towards the primary listening area or place them
in a corner for better bass rendering.
Installation
Each speaker comes with a weather-resistant mounting bracket for easy
installation. Follow these steps:
- Remove the bracket from the loudspeaker.
- Use the bracket as a template to mark the mounting holes.
- Check alignment with a level before drilling pilot holes.
- Affix the speaker to the bracket using the supplied knobs.
- Ensure proper clearance from walls or ceilings and point the speaker towards the listening area.
If unsure about wall or ceiling material strength, consult your authorized dealer or installer to avoid damage.
FAQ
-
Q: Can the OPI Series speakers be used in wet environments?
A: Yes, the OPI Series speakers are designed with IP66 protection, making them suitable for outdoor use in wet conditions. -
Q: What is the recommended spacing between OPI Series speakers?
A: The recommended spacing is between six to fifteen feet apart for optimal performance. -
Q: How can I improve bass rendering with OPI Series speakers?
A: To improve bass rendering, consider placing the speakers in a corner or near a wall for better performance.
OPI Series
Professional Installation Speakers
Overview
- OPI Series is a good choice for outdoor applications due to its IP66 protection. OPI Series offers three different options: OPI40T, OPI60T and OPI80T, all of them intended to live up to demanding expectations when it comes to equipping outdoor installations like terraces, side pools and small events or parties.
- OPI Series comes in ABS polymer cases to deal with tough out-door conditions, and provides IP66 protection against external particles and water.
- With frequency ranges starting with as low as 56 Hz and RMS Powers from 60 to 140 W, OPI Series offers specifications wide enough to meet the needs of different outdoor events and situations, without sacrificing good sound pressure and performance.
Technical Data
Tweeter| OPI40T
1” (25 mm) Silk soft dome
---|---
Woofer| 4.5” (115 mm) Graphite Cone, Rubber Surround
Frequency Range +/-3 dB| 75 Hz – 20 kHz
Power Handling RMS| 60 W program, 40 W (IEEE 219)With
transformer: 40 W program, 30 W (IEEE 219)
Sensitivity| 86 dB
Coverage| H:100° – V:60°
Taps| N/A Transformer: 8 Ω, 0, 30 W, 15 W, 7.5 W, 3.75 W
Impedance| 8 Ω
Termination| Standard rotatory connector
Attachment| Brackets, waterproof cover
Dimensions (H × W × D)| 230×155×148 mm
Weight| 2.4 kg
Housing Material| ABS
Certifications| IP66 waterproof speaker
Tweeter| OPI60T
1” (25 mm) Silk soft dome
---|---
Woofer| 6.5” (165 mm) Graphite Cone, Rubber Surround
Frequency Range +/-3 dB| 57 Hz – 20 kHz
Power Handling RMS| 100 W program, 60 W (IEEE 219) With
transformer: 60 W program, 30 W (IEEE 219)
Sensitivity| 89 dB
Coverage| H:100° – V:60°
Taps| N/A Transformer: 8 Ω, 0, 40 W, 20 W, 10 W, 5 W
Impedance| 8 Ω
Termination| Standard rotatory connector
Attachment| Brackets, waterproof cover
Dimensions (H × W × D)| 285 × 195 × 180 mm
Weight| 3.2 kg
Housing Material| ABS
Certifications| IP66 waterproof speaker
Tweeter| OPI80T
0.5” (13 mm) Silk soft dome
---|---
Woofer| 8” (203 mm) Graphite Cone, Rubber Surround
Frequency Range +/-3 dB| 56 Hz – 20 kHz
Power Handling RMS| 140 W program, 80 W (IEEE 219) With
transformer: 80 W program, 50 W (IEEE 219)
Sensitivity| 90 dB
Coverage| H:130° – V:90°
Taps| N/A Transformer: 8 Ω, 0, 50 W, 25 W, 12.5 W, 6.25 W
Impedance| 8 Ω
Termination| Standard rotatory connector
Attachment| Brackets, waterproof cover
Dimensions (H × W × D)| 360 × 245 × 230 mm
Weight| 4.5 kg
Housing Material| ABS
Certifications| IP66 waterproof speaker
Unpacking
- OPI speaker follows a strict quality control regimen and all factory-sealed products leave the facility in perfect condition. If there are any damages visible or concealed they have occurred in handling and must be reported immediately to your authorized dealer.
- Carefully remove the speaker from the box, take caution as the size often deceives the actual weight. Save all custom cartons and packaging foams for future use. They are rather expensive and may come in handy for future upgrades.
Pack contents:
- 1 speaker
- 1 mounting bracket
- 1 user manual
Speaker Position
-
OPI speakers are perfect for patios, decks, swimming pool decks, porches or any other place where exposure to the elements makes conventional loudspeaker usage unsuitable.
To achieve the best performance from your speakers, place the pair on the same wall facing the listening area and space them six to fifteen feet apart. -
For a higher quality stereo image, angle down, or toe in, the speakers toward the primary listening area. This is especially important in installations that place the speakers well above ear level. You can improve the bass rendering by placing the speakers in a corner or near a wall.
Installation
- Each speaker is supplied with a weather-resistant “C” type mounting bracket. This bracket attach to the speaker with the supplied knobs that threading on the top and bottom studs protruding from the cabinet. This allows the speaker to be angled to the left or right when mounted vertically, or up and down when mounted horizontally.
- After deterring the desired location and orientation of your speakers, remove the bracket from the loudspeaker and use it as a template to mark the location of the mounting holes. Check the alignment of the holes with a torpedo level before drilling the pilot hole.
- Affix the speaker to the bracket with the supplied knobs. Be sure to leave enough clearance between the end of the bracket and any adjacent wall or ceiling for installation of the knobs, point the speaker toward the listening area.
- If you are not sure about the material or strength of the wall or ceiling, please contact your authorized dealer or installer to avoid any damage.
- WARNING Choose dowels according to your wall or ceiling material (wood, concrete…) that can support the weight of the speaker. We highly recommend the use of a torpedo level in order to check the good alignment (vertical or horizontal) of the speaker.
Connections
Connect the speaker terminals to the matching terminals of your amplifier: the “+”of the speaker (red) with the “+”of the amplifier, and the“-”of the speaker (black)with the “-”of the amplifier.
Speaker terminals:
Use
- The speakers require a run-in period before they deliver their best performance. They must get adapted to the temperature and humidity conditions of their environment. This breaking-in period depends on the encountered conditions and can last several weeks. However, you can shorten this period by letting your loudspeakers operate for about twenty hours at moderate volume, playing standard musical programmes.
- WARNING Long sun and/or bad weather exposure can damage your speakers. We recommend placing the speakers in a sheltered location (under a canopy for instance) and to remove them in the winter. Although these speakers have been designed to be weather-resistant, they are not suitable for complete immersion in water.
Warnings On Safety Guidelines
- Read this document thoroughly, follow all safety warnings and keep it for future reference.
- The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel.
- No user serviceable parts inside.
- Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
- Installations, rigging and suspension operations must be done by qualified personnel.
- Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations.
- Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
- Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use.
- Loudspeaker produce magnetic field even while they are not in use or even when disconnected. Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material.
- Disconnect the equipment during lightning storms and when it is not to be used for a long time.
- Do not expose this device to rain or moisture.
- Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
- Clean with a wet cloth. Do not use solvent-based cleaners.
- Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
- Refer all servicing to qualified service personnel.
- This symbol on the product indicates that this product should not be treated as household waste. Follow local regula-tion for recycling of electronic devices.
- IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.
Warranty
- All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices.
- The guarantee excludes damage from incorrect use of the product.
- Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
- Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
- Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement.
Declaration Of Conformity
I MAS D Electroacústica S.L. , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), declares that OPI40T, OPI60T and OPI80T com-ply with the following EU Directives:
- RoHS (2002/95/CE) Restriction of Hazardous Substances
- LVD (2006/95/CE) Low Voltage Directive
- EMC (2004/108/CE) Electro-Magnetic Compatibility
- WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
- EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
- EN 55103-1: 1996 Electromagnetic compatibility: Emission
- EN 55103-2: 1996 Electromagnetic compatibility: Immunity
I MÁS D ELECTROACÚSTICA S.L.
Pol. A Trabe 19-20, 15350 – Cedeira, A Coruña (España) Tel. +34 881 545 135
www.ideaproaudio.com
info@ideaproaudio.com
Specifications and product appearance may be subject to change without notice.
IDEA_OPI-series_UM-BIL_v4.0 | 3 – 2024
Documents / Resources
| IDea
OPI40T Professional Installation
Speakers
[pdf] User Manual
OPI40T, OPI60T, OPI80T, OPI40T Professional Installation Speakers, OPI40T,
Professional Installation Speakers, Installation Speakers, Speakers
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>