IDEA BASSO18-A 18 Active Bass Reflex Subwoofer User Guide
- June 1, 2024
- iDea
Table of Contents
BASSO18-A
18” Active Bass Reflex Subwoofer
QUICK START GUIDE
Overview
BASSO Series models allow the user to choose the most adequate subwoofer for
any given situation from within a family of products with common finish,
design solutions and performance philosophy as well as shared rigging and
transport accessories.
BASSO18-A is an active 1.2 kW single 18” direct radiation subwoofer delivering
a very natural, linear response in the VLF range from 28 Hz to 180 Hz. Built
with 18 mm Premium birch plywood and fitted with a 2 mm steel grille, this
medium format medium format cabinet is finished with IDEA Aquaforce
weatherized coating to endure life on the road or stylishly integrate in any
installation.
BASSO18-A seamlessly matches with 2-way loudspeakers in LUA and EXO Series
maximizing the high-density performance of these systems for a wide range of
portable, mobile and install professional sound reinforcement applications,
from high power club sound systems and medium size live music events to rental
and touring companies.
Optional rigging accessories allow for BASSO18-A to be stacked and flown with
RF-600 rigging frame.
Features
- 1.2 kW Class-D integrated power module by Powersoft
- 24-bit high-resolution DSP with 4 preloaded presets
- Bass reflex design with 5th order tuning
- Premium European High Efficiency custom IDEA Transducers
- Flyable subwoofer
- XLR and PowerCON connectors
- Durable Aquaforce paint, available in standard textured black or white, optional RAL colors (on demand)
- Rugged and durable 18 mm birch plywood construction and finish
- 36 mm pole cup and four integrated handles
- Compatible rigging accessories (optional) for stacked and flown configurations
Applications
- High SPL A/V, portable professional sound reinforcement and touring
- Main or distributed subwoofer system in Pubs, Lounges, Bars and clubs
- Infra extension to other BASSO series subwoofers
- Broadcast Studios and Screening rooms
Technical data
| Enclosure design | Bass Reflex |
|---|---|
| Transducers | 1×18″ |
| Class D Amp Continuous Power | 1.2 kW |
| DSP | 24bit @ 48kHz AD/DA |
4 selectable active LPF cuts
SPL (Continuous/Peak)| 131/137 dB SPL
Frequency Range (-10 dB)| 28 – 100/120/150/180 Hz
Frequency Range (-3 dB)| 34 – 85/100/120/150 Hz
Dimensions (WxHXD)| 600x600x740 mm
Weight| 54.7 kg
Audio Signal Connectors Input
Output| XLR
XLR
AC Connectors| 2xNeutrik PowerCON®
Cabinet Construction| 18 mm birch plywood
Grille| 2 mm perforated weatherised steel with protective foam
Finish| Durable IDEA proprietary Aquaforce paint coating process
Handles| 4 integrated handles
Feet/Skates| 4 integrated feet
Installation| 36 mm Pole mount socket
Accessories| Riggin Frame (RF-600)
Riggin System (RS-BASSO-L)
Wheels (WH-04)
35 mm Pole (K&M-21336)
Rain Coat for power module (RC-BASSO-M+RC-BASSOD-F)
Technical drawings
Warnings on safety guidelines
- Read this document thoroughly, follow all safety warnings and keep it for future reference.
- The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel.
- No user serviceable parts inside.
- Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
- Installations, rigging and suspension operations must be done by qualified personnel.
- This is a Class I device. Do not remove Mains connector ground.
- Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations.
- Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
- Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use.
- Loudspeaker produce magnetic field even while they are not in use or even when disconnected. Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material.
- Disconnect the equipment during lightning storms and when it is not to be used for a long time.
- Do not expose this device to rain or moisture.
- Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
- Clean with a wet cloth. Do not use solvent-based cleaners.
- Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
- Refer all servicing to qualified service personnel.
- This symbol on the product indicates that this product should not be treated as household waste. Follow local regulation for recycling of electronic devices.
- IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.
Warranty
- All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices.
- The guarantee excludes damage from incorrect use of the product.
- Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
- Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
- Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement.
Declaration of conformity
I MAS D Electroacústica S.L. , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), declares that EVO55-P complies with the following EU Directives:
- RoHS (2002/95/CE) Restriction of Hazardous Substances
- LVD (2006/95/CE) Low Voltage Directive
- EMC (2004/108/CE) Electro-Magnetic Compatibility
- WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
- EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
- EN 55103-1: 1996 Electromagnetic compatibility: Emission
- EN 55103-2: 1996 Electromagnetic compatibility: Immunity
I MÁS D ELECTROACÚSTICA S.L.
Pol. A Trabe 19-20, 15350 – Cedeira, A Coruña (España)
Tel. +34 881 545 135
www.ideaproaudio.com
info@ideaproaudio.com
Specifications and product appearance may be subject to change without
notice.
IDEA_EVO55-P_UM-BIL_v4.0 | 4 – 2024
Documents / Resources
| IDEA
BASSO18-A 18 Active Bass Reflex
Subwoofer
[pdf] User Guide
BASSO18-A 18 Active Bass Reflex Subwoofer, 18 Active Bass Reflex Subwoofer,
Bass Reflex Subwoofer, Reflex Subwoofer, Subwoofer
---|---