IDea BASSO21 21 Inch Direct Radiation Multipurpose Subwoofer User Guide

IDea BASSO21 21 Inch Direct Radiation Multipurpose Subwoofer

Specifications

• Model: BASSO21
• Bass Reflex: 21”
• Components: Riggin Frame (RF-600), Riggin System (RS-BASSO-L), Wheels (WH-04), 35 mm Pole (K&M-21336)
• Dimensions: 600 mm x 950 mm x 600 mm
• Manufacturer Contact: Tel. +34 881 545 135, www.ideaproaudio.com, info@ideaproaudio.com
• Disclaimer: Specifications and product appearance may be subject to change without notice.
• Model Number: IDEA_BASSO21_QS-BIL_v4.0 | 4 – 2024

Assembly

1. Attach the Riggin Frame (RF-600) to the Riggin System (RS-BASSO-L).
2. Insert the 35 mm Pole (K&M-21336) into the designated slot on the system.
3. Secure the Bass Reflex 21” component onto the frame.

Setup

1. Place the assembled unit in the desired location.
2. Ensure the Wheels (WH-04) are locked in place for stability.
3. Adjust the height and angle of the system as needed for optimal performance.

Maintenance
Regularly inspect all components for wear and tear. Clean the system using a damp cloth and avoid harsh chemicals that may damage the finish.

FAQ
Q: Can I use the BASSO21 outdoors?
A: The BASSO21 is designed for indoor use. Exposure to outdoor elements may damage the components.

overview

• Many key factors are to be considered when configuring the subwoofer section of a loudspeaker system to perfectly match each application: size/weight, logistic and operational setups, SPL needs, LF extension, cost limitations, as well as sound engineer preferences (depending on different the type and size of the event) or audio program characteristics and regional style taste for subwoofer mixes.
• BASSO Series models allow the user to choose the most adequate subwoofer for any given situation from within a family of products with a common finish, design solutions and performance philosophy as well as shared rigging and transport accessories.
• BASSO21 is a high-density single 21” direct radiation subwoofer that delivers a very natural, linear response in the VLF range from 25 Hz up to 140 Hz. Built with 18 mm Premium birch plywood and fitted with a 2 mm steel grille, this medium format medium format cabinet is finished with IDEA Aquaforce weatherized coating to endure life on the road or stylishly integrate in any installation.
• BASSO21 seamlessly matches with 2-way loudspeakers in LUA and EXO Series maximizing the high-density performance of these systems for a wide range of portable, mobile and install professional sound reinforcement applications, from high power club sound systems and medium size live music events to rental and touring companies. BASSO21 can be (on demand) served with BASSO rigging structures, allowing for stacked and flown configurations.

Features

• Rugged and durable 18 mm birch plywood construction and finish
• Bass reflex design
• Premium European High Efficiency custom IDEA Transducers
• 8 Ohm Passive
• Dual Neutrik NL4 connectors
• Durable Aquaforce paint, available in standard textured black or white, optional RAL colors (on demand)
• Turn-key Factory Amplifier/DSP dedicated configurations
• 36 mm pole cup and four integrated handles
• Compatible rigging accessories (optional) for stacked and flown configurations with EVO systems

Applications

• High SPL A/V, portable professional sound reinforcement and touring
• Main or distributed subwoofer system in Pubs, Lounges, Bars and clubs
• Infra extension to other BASSO series subwoofers
• Broadcast Studios and Screening rooms

Technical data

Connectors

+/-1

+/-2

| 2×Neutrik speakOn NL-4 in parallel Input

Parallel signal

Cabinet Construction| 18 mm Plywood
Grille| 2 mm perforated weatherised steel with protective foam
Finish| Durable IDEA proprietary Aquaforce paint coating process
Handles| 4 integrated handles
Feet/Skates| 4 rubber feet
Installation| 36 mm Pole mount socket
Accessories| Riggin Frame (RF-600) Riggin System (RS- BASSO -L) Wheels (WH-04)

35 mm Pole (K&M-21336)

Technical drawings

warnings on safety guidelines

• Read this document thoroughly, follow all safety warnings and keep it for future reference.
• The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel.
• No user serviceable parts inside.
• Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer.
• Installations, rigging and suspension operations must be done by qualified personnel.
• Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations.
• Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
• Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use.
• Loudspeaker produce magnetic field even while they are not in use or even when disconnected. Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material.
• Disconnect the equipment during lightning storms and when it is not to be used for a long time.
• Do not expose this device to rain or moisture.
• Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit.
• Clean with a wet cloth. Do not use solvent-based cleaners.
• Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
• Refer all servicing to qualified service personnel.
• This symbol on the product indicates that this product should not be treated as household waste. Follow local regulations for recycling of electronic devices.
• IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment.

warranty

• All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices.
• The guarantee excludes damage from incorrect use of the product.
• Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
• Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair.
• Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement.

Declaration of conformity
I MAS D Electroacústica S.L. , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), declares that BASSO21 complies with the following EU Directives:

• RoHS (2002/95/CE) Restriction of Hazardous Substances
• LVD (2006/95/CE) Low Voltage Directive
• EMC (2004/108/CE) Electro-Magnetic Compatibility
• WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
• EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements.
• EN 55103-1: 1996 Electromagnetic compatibility: Emission
• EN 55103-2: 1996 Electromagnetic compatibility: Immunity

I MÁS D ELECTROACÚSTICA S.L.
Pol. A Trabe 19-20, 15350 – Cedeira, A Coruña (España) Tel. +34 881 545 135
www.ideaproaudio.com
info@ideaproaudio.com
Specifications and product appearance may be subject to change without notice. Las especificaciones y aparienca del prodcuto pueden estar sujetas a cambios.
IDEA_BASSO21_QS-BIL_v4.0 | 4 – 2024

References

• IDEA Pro Audio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>