IDea EVO55-M Dual 5 Inch Active Line Array System User Guide
- June 1, 2024
- iDea
Table of Contents
- IDea EVO55-M Dual 5 Inch Active Line Array System User Guide
- overview
- system configuration
- features
- applications
- technical data
- technical drawings
- warnings on safety guidelines
- declaration of conformity
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IDea EVO55-M Dual 5 Inch Active Line Array System User Guide
overview
EVO 55 System 4-element line-array cluster is a unique profes- sional
install sound reinforcement solution that offers excellent modularity and
versatility.
This very compact 4-element array cluster (smaller than a typi- cal 15” 2-way
loudspeaker) will always deliver SPL and coverage beyond the physical size of
the system, while it can be rigged and operated with minimal logistical
resources. It can be pole mounted, stacked and flown very easily by only
operator.
EVO 55 elements features HF assembly with a 1” compres- sion driver and a
proprietary wave-guide design and a dual-5”
woofer configuration for the LF section. These premium-quality, high-
performance European transducers a dedicated passive crossover filter allow
for a natural, linear response throughout the useful frequency range spectrum
without any processing of the system.
The integrated weatherised steel rigging structure and stacking, transport and
rigging accessories make EVO 55 System a really plug-and-play professional
sound reinforcement solution
system configuration
The active EVO 55-M element features a 1.4 kW Class-D amp and DSP power
module by Powersoft so one EVO 55-M element powers 3 EVO 55-P
elements, as shown in the diagram on the left, with the dedicated SpeakON NL-4
cable links included with every EVO 55-M.
Depending on the scale of the application, a medium-sized EVO 55-M system
can be easily split into smaller clusters for mobile and portable solutions.
features
- 2-Way Dual 5” Ported Compact Line-Array elements
- Powersoft Class-D 1.4 kW power module
- Active 1.4 kW version powers 3 EVO 55-P passive elements
- Premium European High Efficiency custom IDEA Transducers
- Proprietary IDEA High-Q 4-slot line-array waveguide
- Dedicated transport /storage/rigging accessories and flying frame
- Staked and flown configurations with BASSO 24t F400, with active and passive versions
applications
- High SPL A/V portable sound reinforcement
- FOH for small to medium size performance venues and clubs
- Ultra-compact High SPL installed sound reinforcement
technical data
EVO 55-M (x1) | EVO 55-P (x3) | |
---|---|---|
Enclosure design | 5˚ Trapezoidal | |
LF Transducer | 2 × 5” High Performance Woofers | |
HF Transducer | 1 × 1” Compression Driver | |
Amp/DSP Module | 1.4 kW | – |
Power Handling (RMS) | – | 300 W |
Nominal Impedance | – | 16 Ohm |
SPL (Continuous/Peak) per element | 121/127 dB SPL | |
SPL (Continuous/Peak) 4-element system | 125/131 dB SPL | |
Frequency Range (-10 dB) per element | 69 – 19000 Hz | |
Frequency Range (-3 dB) per element | 95 – 17000 Hz | |
Connectors | 2 × XLR + 2 × PowerCON + 2 × NL-4 | 2 x NL-4 |
Cabinet Construction | 12/15 mm Birch Plywood | |
Grille | 1.5 mm perforated weatherised steel with protective foam | |
Finish | Durable IDEA proprietary Aquaforce High Resistance |
paint coating process
Rigging Hardware| High-resistance, coated steel integrated 4-point rigging hardware
(internal splay angles: 0˚-1.25˚-2.5˚-5˚)
Dimensions (WxHxD)| 416 × 154 × 396 mm| 416 × 154 × 334 mm
Dimensions (WxHxD) System| 416 × 622 × 396 mm
Weight – per element| 15.8 kg| 13.3 kg
Weight – System| 55.7 kg (122.8 lb)
Handles| 2 integrated handles
Accessories
| Rigging frame (RF EVO 55) Rigging frame stack (RF EVO 55 STK)
Pole adaptor (PA EVO 55)
Extensible pole with hand crank (P21338)
technical drawings
warnings on safety guidelines
- Read this document thoroughly, follow all safety warnings and keep it for future reference.
- The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations mustbe done by qualified and authorized personnel.
- No user serviceable parts
- Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized
- Installations, rigging and suspension operations must be done by qualified
- This is a Class I Do not remove Mains connector ground.
- Only use accessories specified by IDEA , complying with maximum loads specifications and following local safetyregulations.
- Read the specifications and connection instructions before proceeding to connect the system and use only cablingsupplied or recommended by IDEA. Connection of the system should be done by qualified personnel.
- Professional sound reinforcement systems can deliver high SPL levels that may result in hearing Do not stand close to the system while in use.
- Loudspeaker produce magnetic field even while they are not in use or even when Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material.
- Keep the equipment in the safe working temperature range [0º-45º] at all
- Disconnect the equipment during lightning storms and when it is not to be used for a long
- Do not expose this device to rain or
- Do not place any objects containing liquids, such as bottles or glasses, on the top of the Do not splash liquids on the unit.
- Clean with a wet Do not use solvent-based cleaners.
- Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when
- Refer all servicing to qualified service
- This symbol on the product indicates that this product should not be treated as household Follow local regula- tion for recycling of electronic devices.
- IDEA declines any responsibility from misuse that may result in malfunction or damage of thewarranty
- All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acousti- cal parts and 2 years from date of purchase for electronic devices.
- The guarantee excludes damage from incorrect use of the
- Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres.
- Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee
- Return the damaged unit, at shipper’s risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement.
declaration of conformity
I MAS D Electroacústica S.L. , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), declares that EVO55-M complies with the following EU Directives:
- RoHS (2002/95/CE) Restriction of Hazardous Substances
- LVD (2006/95/CE) Low Voltage Directive
- EMC (2004/108/CE) Electro-Magnetic Compatibility
- WEEE (2002/96/CE) Waste of Electric and Electronic Equipment
- EN 60065: 2002 Audio, video and similar electronic Safety requirements.
- EN 55103-1: 1996 Electromagnetic compatibility: Emission
- EN 55103-2: 1996 Electromagnetic compatibility: Immunity
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>