ZEBRONICS B098XKYS8P County 3 Portable BT Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS B098XKYS8P County 3 Portable BT Speaker
Thank you for purchasing ZEB-COUNTY 3 BT speaker. Please read this user manual
carefully before operation & save it for future reference.
Note:
- Avoid the use of this product in a high temperature and high humidity environment.
- Avoid self-disassembly of the product, or it will result in the failure of the warranty.
- Please charge the product with power adaptor output rated voltage SV DC.
Features:
- Wireless BT
- Supports USB & mSD card Built-in FM Radio
- AUX Input
- Call function
- Media / Volume control Built-in Rechargeable battery
Specification:
- Output power (RMS): 3W
- BT Version: 5.0
- Driver Size: 5.7cm
- Speaker Impedance: 3
- Frequency Response: 120Hz-15kHz
- S/N Ratio: >68dB
- Max. Supported USB/mSD memory size: :32GB
Supported
- Audio formats: Mp3
- Charging time: 2H
- Playback time: 10H*
- Product dimension (W x D x H): 45x90x135mm
- Net. weight: 292g
Button Description
Button Instructions
Instructions for Use
Button functions
- Press the M button to change the input mode of the speaker.
- Short press the +/- button to change the NEXT/PREV. track or channel when in BT mode or FM mode respectively.
- Long press the +/- button to increase/decrease the speaker volume.
- Press the ► button to Play/ Pause the track being played.
- During calls, press the ► button to attend I end a call. Long press the ► button to reject an incoming call.
Charging the Speaker
- Connect the USB charging cable to the DC SV Charging port of the speaker and insert the other end into a USB power source/adapter.
- Red LED glows indicating that the battery is being charged. The Red LED will turn off once it is fully charged.
Pairing your device with Bluetooth Speaker
- Power ON the speaker until you hear the indication tone for Bluetooth mode.
- Blue LED indicates that your speaker is now ON and is in pairing mode.
- Switch ON BT on your phone or tablet and search for nearby BT devices.
- Search for the BT name “ZEB-COUNTY 3” and tap to connect it.
Micro SD/ USB mode
Connect the Micro SD card / USB device to the respective ports of COUNTY 3 and
the speaker would automatically start playing from the Micro SD card/USB
device.
AUXmode
Connect the speaker to an audio source (phone, TV, PC) using the micro USB to
3.5mm cable provided in the box. Once connected, change the speaker to AUX
mode and thereafter audio can be streamed via the speaker from the connected
source.
FM Radio mode
Once the speaker is in FM mode, press the ► button once to start scanning for
FM channels. Once the scanning is complete, press the +/- button to change
the channels. Connect the micro USB cable to the micro USB port of the
speaker, which acts as an antenna for a better signal.
TWS Connectivity
T.W.S. mode requires two units of ZEB-COUNTY 3 speakers. after entering
the BT mode, long-press the M button (on either of the two speakers) after
which, a pairing tone will be heard, indicating the interconnection between
the two speakers. Now check the phone’s BT setting for ZEB-COUNTY 3 and
connect lt to experience True Wireless Stereo.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>