CHUANGO RV-500 Robot Vacuum Cleaner User Manual
- June 5, 2024
- CHUANGO
Table of Contents
**CHUANGO RV-500 Robot Vacuum Cleaner User Manual
**
Safety Instructions
This appliance can be used by children aged from 13 years and above and persons with reduced physical, sensory or mental capab师es or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
The Robot must be used in accordance with the instructions in this user Manual. We will not be held liable or responsible for any damages or injuries caused by improper use. To reduce the risk of injury or damage, keep these fety precautions in mind when setting up, using and maintaining your Robot:
- Read all safety and operating instructions before operating your Robot
- Retain the safety and operating instructions for future reference.
- Read all warnings on your Robot, battery, Charging Dock and in the user manual
- Follow all operating and use instructions
The symbol on the product or its packaging indicates:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local authority for information regarding the collection systems available, if electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, darn aging your health and well- being. Please contact your local or regional waste authority for more information on collection, reuse and recycling programs.
Use Restrictions
- Your Robot is for indoor use only. Do not use the Robot outdoor, commercial or industrial environments.
- Before using this device, pick up objects like clothing, loose papers, pull cords for lf the device passes over a power cord and drags it, there is a chance an object (table or shelf etc.) could be pu lied
- Do not sit or stand on this device. Small children and pets should be supervised when your Robot is operating
- Store and operate your Robot in room temperature environments only
- Do not use this device to pick up anything that is burning or smoking
- Do not use this device to pick up spills of bleach, paint or other chemicals, or anything wet.
- lf the room to be cleaned contains a balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capab由ties, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person respons心e for their safety
- Children should be super\IIsed to ensure they do not play with the Robot. Cleaning and maintenance shall not be performed by children without supervision
- Do not place anything on top of your Robot.
- Be aware that the Robot moves on its own. Take care when walking in the area that the Robot is operating in to avoid stepping on忭
- Do not operate the Robot in areas with exposed electrical outlets in the floor.
Battery and Charging
- Use only rechargeable battery packs with the correct specification approved by.
- Charge using a standard outlet only. Product may not be used with any type of power converter. Use of other power converters will immediately void the warranty.
- Do Not Use a Charging Dock with a Damage cord or plug. If the cord or plug is damage , it must be serviced the manufacture or similarity qualified persons.
- Always charge and remove the battery from your Robot and accessories before long term storage or transportation
- Charge indoors only.
- Your Robot’s Charging Dock may be protected with a surge protector in the event of severe electrical storms
- Never handle the Charging Dock with wet hands
- Always disconnect your Robot from the Charging Dock before cleaning or maintaining it.
- Please ensure voltage rating for enclosed Charging Dock matches standard outlet voltage.
- Used battery packs should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations.
- Before every use, check the battery pack for any sign of damage or leakage. Do not charge damaged or leaking battery packs
- If the battery pack is leaking, contact Customer Service for dispo扫l
- The battery pack must be removed from the Robot before dispo羽l
- Do not crush or dismantle battery packs. Do not heat or place the battery pack near any heat source.
- Do not incinerate the battery pack. Do not short-circuit the battery pack.
- Do not immerse the battery pack in any liquid.
Product Overview
Robot
Status
|
Button Circular lndicator Light
---|---
Sleeping| Off
Stand by/Cleaning Returning to Charge Dock While Power Is Availab le| I Solid
Blue
Charging| Flashing Purple
Status
|
WiFi lndicator Light
---|---
Sleeping| Off
Connecting| Flashing blue
Connected| Solid Blue
Charging Dock
Get Started
Place the Charging Dock
Place the Charging Dock on a hard, level surface and again st a wall.
Charge The Dock
Connect the round connector of the adapter into the power socket on the Charging Dock and the other end into a wall outlet.
Please charge this device for 5-6 hours before use.
Install Side Brush
Attach the side brush to the bottom of Robot by pressing a brush into slot.
Turn On/Off the Robot
Turn on/a仔the power switch on the bottom of the device.
Activate the Robot
Place the Robot onto Charging Dock, and make sure the Charging Contact Pins on
the Charging Dock match up with those underneath the Robot. lf successful you
will hear a series of tones. Once the button illuminates, the Robot is ready
for use.
Start Cleaning
- Press the button once to wake up the Robot.
- Press the ****button again to start a cleaning cycle
lf the Charging Dock is inaccessible, Robot will not be able to recharge Press button or manually place the Robot on the charging dock for charging.
Boundary Strip
With the Boundary Strip, you can keep Robot away from any area or item you do
not want Robot to dean. Robot will recognize the Boundary Strip and will not
cross into the blocked-off area ldentify the area or item you do not want
Robot to get close to ]/ necessary, use scissor s to cut the Boundary Strip to
a shorter length. Be sure to correctly measure the length before cutting Apply
adhesive tape to lay the Boundary Strip flat on the floor. Make sure the stnp
1s placed FLAT on the floor
Note: If the Boonctary Stnp iS rolled up, remCNe and then re-,apply on the floor with adhesr;e tape Otherwise the Boundary Strip may not work well Be careful not to damage the floor when u11ng adhesive tape. It is not recommended le, use on careFS Keep the Boundary Strip away from objects that emit excrnwe heat.
App Download
Search for “Dream Catcher Life” in App Store/Google Play, then create an account and follow the in-app instruction to add the robot vacuum cleaner on your smart phone.
Care and Maintenance
To keep Robot running at peak perfomance, perform the following care procedureslf you notice Robot picking up less debris from your floor, t hen empty the bin, clean the filter and main brush. Recommended cleaning/ replacement frequen
Robot Part | Cleaning | Replacement Frequency |
---|---|---|
Dust Bin | After each use | |
Filters | Once every week | Every 2 month |
Main Brush | Once every week | Every 6-12 months |
Side Brush | Once every month | Every 3-6 months(or when visibly worn) |
Sensors | Once every month | |
Charging Pins | Once every month | |
Swivel Wheel | Once every month |
Empty Dust Bin
Press bin release button to remove the bin
Open bin’s door to empty it
Clean Filter
Remove filter by grasping the white tab
Shake off debris by tapping the filter against your trash container.
Rinse filter with water.
Air-dry the filters completely before use
Clean main brush, side brush, swivel wheel and sensors
Take out the Main Brush, clean the vacuuming aisle by a cloth.
Clean the Main Brush. Cut down the hair winded in the Main Brush with the provided deaning tool’s knife
Remove the Side Brush, use a cloth to remove the dust from the brush
Pull out the Swivel Wheel, then clean the Swivel Wheel with the cleaning tool
Dust off the Anti-Drop Sensors and Optical Sensor maintain the best performance
Troubleshooting
Any error that occurs during operation will be notified by the Robot through light status and beeps, the instruction as below.
Indication
|
Beeps
|
Err o r
|
Solution
---|---|---|---
Flashing Light| 1| Gyroscope error| Keep the Robot at a stable place to
restart and do not move the Robot
2| Bumper error| Check the bumper and remove any object that could be blocking
it.
3| Anti-Drop Sensor error| Check if the sensor dirty and clean sensor.
4| Low Power or Charging error| Robot power is too low and needs manually
charging
Solid red light| 1| Driving Wheel error| Check if the Driving Wheel is blocked
---|---|---|---
2| Side Brush error| Check if the Side Brush is blocked and clean the Side
Brush
3| Fan error| Clean up the garbage and air ducts channel
4| Main Brush error| Check if the Main Brush is entangled and clean the Main
Brush
Tips
lf the above method can not solve the problem, please try the following: Turn
off the Power Switch at the bottom of the Robot and restart.
Frequently Asked questions
Problems
|
Solutions
---|---
Robot cannot be charged activated|
- Make sure the main Power Switch is in the ON position
- Make sure the battery is fully charged
- lf you still have trouble, turn off the main Power Switch and then turn it back on
Robot stops working suddenly|
- Check if Robot is trapped or stuck on an obstade
- Check if the battery level is too low.
- lf you still have trouble, turn off the main Power Switch, wait for 2 seconds, and then turn it back on.
You can’t schedule cleaning|
- Make sure the main Power Switch on the bottom of Robot s turned on
- Make sure the time, time of day (AM/PM), and the scheduled time have been set correctly. Charging Time 300 – 360 mins
- Check if Robot’s power is too low to start cleaning
Suction power is weak|
- Check if any obstructions are blocking the suction inlet
- Empty the Dust Bin
- Clean the filters with a vacuum cleaner or a cleaning brush
- Check if the filters are wet due to water or other liquid on the floor. Air-dry the filters completely before use
Robot can’t be charged|
- Check if the indicator on the Charging Dock lights up If not, repair or replace the Charging Dock Robot can’t be
- Dust off the charging contact pins with a dry doth
- Check if you can hear a beep when robot returns to the Charging Dock, If not, repair or replace the Charging Dock
Robot can’t return to the Charging Dock|
- Remove objects within 3 ft/1 m to the left and right side and within 6 ft/2 m of the front of the Charging Dock
- When robot is in the vicinity of the Charging Dock, it will return more quickly. However, if the Charging Dock is located far away, Robot will need more time to return Please be patient as it works its way back
- Clean the charging contact pins
The Main brush doesn’t rotate.| Clean the Main Brush Check if the Main Brush
and brush guard have been installed properly.
Robot movements or travel path are abnormal|
- Clean the sensors carefully with a dry cloth
- Restart Robot by turning the power switch off and on
Specifications
Product Model
|
RV-500
---|---
Input| 19V = 0 6A
Battery Voltage| DC 14.4 V
Power Consumption| 28W
Battery Type| DC 14.4 V Li一ion 2600 mAh
Dust Collector Capacity| 0 55 L
Cleaning Time| Max 120 mins
Cleaning Time| 300 – 360 mins
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>