logitech Zone Wired Earbuds with Noise Cancelling Mic User Guide

: June 5, 2024
: Logitech

Table of Contents

KNOW YOUR PRODUCT
WHAT’S IN THE BOX
HEADSET IN-LINE CONTROLS AND INDICATOR LIGHT
LOGI TUNE
DIMENSION
SYSTEM REQUIREMENTS
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LOGITECH ZONE WIRED EARBUDS
Setup Guide

KNOW YOUR PRODUCT

IN-LINE CONTROLLER

WHAT’S IN THE BOX

Wired earbuds with M size eargels and 3 .5mm connector
In-line controller with USB-C connector
USB-A adapter
Travel bag
Replaceable eargels (1 pair per XS/S/L size)
User documentation

CONNECTING THE EARBUD

Connect via 3.5mm

Unplug the 3 .5mm connector from the in-line controller .
Plug the 3 .5mm connector into your mobile or tablet 3 .5mm port.

Note: Compatibility may depend on device models . Mic and audio quality will convert to analog with a 3 .5mm connector.

Connect via USB-C

Plug the 3 .5mm connector into the controller .*
Then plug the USB-C connector into your computer USB-C port.

Note: Compatibility may depend on device models.

Connect via USB-A

Plug the 3 .5mm connector into the controller .*
Plug the USB-C connector into the USB-A adapter.
Plug the USB-A connector into your computer USB-A port.

Note: Only use the USB-A adapter with the provided earbuds.

Make sure 3 .5mm connector is fully inserted into the controller.

EARBUD FIT

Earbuds are marked ‘L’ and ‘R’ for the left and right ears. Earbuds are fitted with medium size eargels out of the box.
Slightly move the earbud around to be securely positioned in your ear.
If your earbuds are not comfortable, change to alternative-sized eargels. See the next section for the replacement steps.
• Try a small size if you feel too much pressure on your ear, or a large size if the earbuds are too loose.
• Note that you may use different sized eargels in each ear as your ears may not be the same size.
Move the slider at the Y-joint up and down to adjust the cable length.

REPLACING THE LARGER

Hold the body of the earbud with one hand.
With the other hand, gently pull the whole largely away from the body of the earbud .
Grab alternative-sized eargels. Please find the size inside the large.
Gently stretch the eagle onto the earbud, until there is no gap between the large and the body of the earbud.

HEADSET IN-LINE CONTROLS AND INDICATOR LIGHT

TEAMS version

Button| Usage| Indicator Light|

Action

+

| Volume| No light| Short press to volume up

–

| Short press to volume down

Note: Teams activities are only functional when Teams is running on an unlocked PC or Mac .

UC version

Button

| Usage| Indicator Light|

Action

+

| Volume| No light| Short press to volume up

–

| Short press to volume down

Voice assistant functionality may depend on device models.

LOGI TUNE

Logi Tune helps boost your earbud performance with periodic software and firmware updates.
Learn more and download Logi Tune at: www.logitech.com/tune

DIMENSION

Earbuds:
Height x Width x Depth: 23 .4 mm x 23 .1 mm x 27 .3 mm
Weight: 0 .033 Kg
Adapter:
Height x Width x Depth: 24 .5 mm x 15 .4 mm x 8 .6 mm

SYSTEM REQUIREMENTS

Works with Windows, Mac, or Chrome™ based computers and Android™ or iOS-based mobile devices via available 3 .5 mm, USB-C, or USB-A port. 3 .5 mm connector compatibility may depend on device models. Functionality for mobile devices with USB-C depends on device models.

TECHNICAL SPECIFICATIONS

Input Impedance: 16 Ohms
Sensitivity (headphone): 117dB SPL/1mW/1KHz (driver level)
Sensitivity (microphone): Dual mic configuration each with -38dBV/Pa (mic component level)
Frequency response (Headset): 20-15kHz
Frequency response (Microphone): 100-8kHz
Cable length: 1 .45 m