EELINK MGT90 Magnetic GPS Tracker for Car User Manual

: June 5, 2024
: eeLink

Table of Contents

Product Features
Basic Specifications
Components and Accessories
SIM card Installation
Test & Installation
Setting & Inquiry
Troubleshooting
Warranty rules
Warranty Card
Documents / Resources

User Manual

MODEL： MGT90

Welcome to use our terminal， please read this manual carefully to install and operate the terminal exactly. This user manual is for reference only. If some contents and operation steps are inconsistent with those for the actual product, the latter will prevail.

Using MGT90 GPS tracker, we can position, monitor, and control the vehicle on the position server via GPRS, GPS, and the Internet. It can help customers to manage transparently, reduce costs, maintain security and raise efficiency. Now it is widely used in business traffic, logistics distribution, automobile lease, intelligent transportation, shipping market, army, and police, rescuing, Safety Supervision, and Intelligent city…

Product Features

■ Supports quad bands, i.e. 850/900/1800/1900MHz, universal in the world.
■ Built-in 14500mAh Super high-capacity zero self-discharge lithium thionyl chloride batteries, can stand up to three years( Power on once per day)
■ Strong magnetic force, can be installed on iron absorption
■ Military-grade three anti-performance, waterproof to IP67
■ GPS / LBS dual positioning, support A-GPS
■ Customize 6/12/24/48-hour work intervals in long standby mode
■ Switch to emergency mode to restore the real-time tracking mode
■ WEB platform, mobile APP, SMS remote setting mode, tracking devices
■ Support protocol can be used in multiple customer platforms
■ OTA upgrade firmware.

Basic Specifications

Voltage	3.7 VDC
Work Current	<30 mA
Standby Current	<15 uA
GPS Accuracy	5-15m
GSM Accuracy	About 100m
GPS Frequency	1575MHz
GSM Frequency	850/900/1800/1900MHz
Hot/warm/cold Start	<3s , <15s , <60s
Battery Capacity	14500 mAh
Dimensions (mm)	87(L)X41.6(W)X 12(H)
Work Temperature	-20°C-70°C
Work Humidity	20%-80%RH
Net Weight	180g
IPR	IP67

Components and Accessories

■ 2.1 Components

■ Accessories（reference pictures ）
Screwdriver Screws

SIM card Installation

Open the packing case, check if the terminal is OK and the accessories are intact, or please contact your dealer;
You need a suitable SIM card for using the terminal, contact your dealer if any questions;

Note:

The SIM card should support GPRS and GPRS should be opened.
Inquiry by call needs the SIM card supporting the calling line identification presentation.
If you enable the PIN code of the SIM card, please use your mobile phone to disable the PIN code.
Please make sure that the SIM card has a sufficient balance.

Test & Installation

4.1 Power On

Turn on the power. Move the device outdoors and make sure GPS signal is good.

4.2 LED Indicators
Red LED flickers fast when the device is searching for a GSM network, it flickers slowly when the device has registered the GSM network successfully.
Blue LED flickers fast when the device is searching for the GPS satellite signal, it flickers slowly when the device has searched the satellites and been positioned.

Red LED(indicates GSM working state)
Fast flicker| Searching for GSM network
---|---
Slow flicker| GSM/GPRS works normally
Blue LED(indicates GPS signal state)
Fast flicker| Searching GPS Satellites
---|---
Slow flicker| GPS works normally

Red and blue lights flash slowly (once per 5 seconds ), and the device works properly.

4.3 Installation
Close the bottom cover, tighten the screws, and adsorb the device to iron.

Setting & Inquiry

5.1 Web Platform & APP

5.1.1 Web Browser platform
Log in to the service platform to set or track the device, and ask your dealer for the WWW address

5.1.2 Smartphone application
Use the smartphone APP, and ask your dealer to get the installation package.
Example, the Remote set by the Android APP Client

5.2 SMS
You can write an SMS command and send it to the device to set or request the position of the device, please refer to the to get commands

Troubleshooting

6.1 Platform Cannot connect
1）Is the SIM card installed correctly? Please refer to the installation instructions.
2）Check the status of the LED indicators. If the terminal is OK, the red LED and the blue LED will intermittently and slowly flash.
3）Inquiry about the parameters of the device via commands and check the accuracy of the parameters.

6.2 No positioning
If the GPS is active, but the terminal cannot be positioned for a long time, please check the terminal:
1）If the vehicle is in a place where there is no GPS signal.
2）The GSM and GPS signal may be weakened if the device is installed in the place around the metal.

6.3 Position drift
Position drift will occur in places where the GPS signal is poor. Please move to the open places.

Warranty rules

7.1 Special statement
1）Technology change without notice.
2) If the color and appearance are inconsistent with those of the actual product, the latter will prevail.
3）Warranty card is only valid for the terminals with the following IMEI.
4）Please take care of the warranty card and show it with the original purchase receipts when enjoying the warranty service.

7.2 Warranty period
Since the date of purchase, the passive waste host has one year warranty.

7.3 After-sales
Any of the following circumstances are not covered by the warranty, but may be appropriate to pay for repair:
1）More than the warranty period.
2）Unauthorized removal or repair damaged.
3）Damage caused by improper installation, use, maintenance, and custody.
4）The IMEI label is torn or Obscured.
5）Warranty certificate and product models do not match or warranty certificate be altered.
6）Damage caused by force majeure.