nordlux AC12 Ethan 2 Spot Matt White Ceiling Light Instruction Manual

: June 1, 2024
: nordlux

Table of Contents

nordlux AC12 Ethan 2 Spot Matt White Ceiling Light
Operation

nordlux AC12 Ethan 2 Spot Matt White Ceiling Light

Specifications

Class: Class II
Isolation: Double insulated
Grounding: Not required to be connected to the ground wire of the installation

Installation

Ensure the power source is turned off before installation.
Mount the lamp securely in the desired location using appropriate fixtures.
Make sure the lamp is placed away from any flammable materials.

Operation

Turn on the lamp using the designated switch or control.
Adjust the brightness or settings as needed.
Avoid looking directly into the light source to prevent eye strain.

Maintenance

Regularly clean the lamp with a soft, dry cloth to remove dust and dirt.
Check for any loose connections or damage to the lamp periodically.
Replace any faulty parts immediately to ensure safe operation.

Frequently Asked Questions (FAQ)
Q: Do I need to ground the lamp during installation?
A: No, the lamp is double insulated and does not require connection to the ground wire.

Installation

IP20: IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
Class II: The lamp is double-insulated and does not need to be connected to the vellow/green earth wire.
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
MAX 2x50W Do not exceed the maximum wattage.
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
General maintenance: Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process, and is what gives Mouth-blown glass its character and organic look. Always clean mouth-blown glass cold.

www.nordlux.com