bea-fon FLEXY1F Smart Home Indoor Security Camera User Manual
- September 3, 2022
- bea-fon
Table of Contents
bea-fon FLEXY1F Smart Home Indoor Security Camera
What‘s in the Box
Caution
Please note the EU General Data Protection Regulation (GDPR)
Surveillance and privacy laws vary by jurisdiction. Before using this product,
review all relevant laws in your jurisdiction to ensure that your use does not
violate any applicable laws Bea-fon Mobile GmbH assumes no responsibility for
the consequences of false using.
Description
Install
- Stick the adhesive tape in the middle of camera bottom.
- Put the camera on the clean plane.
Connect
Download
Beafon Home App is available for both iOS and Android OS. Search the name
„Beafon Home“ in App Store or Google Play, or scan the QR-Code to download the
App.
Support
Set up router
The router supports the 2.4GHz WiFi (doesn‘t support the 5GHz). Before
connecting to the WiFi network, please set the parameters of the router, and
record the SSID and password of your WiFi.
Registration
Step 1
Open the Beafon Home App, click „Register“, read the „Privacy Policy“ and
click „Agree“.
Step 2
Input a legal and valid Mobile number or Email address and click „Continue“.
Input Verification Code, then log in the app.
QR Code Configuration
Step 1
Open the BeafonHome App, click „Create family“, and you can customize the
Family name and related settings.
Step 2
Continue to click „Security & Sensor“ >> „Smart Camera“,and then choose „Add
Device“ or „+“,ready to add camera.
Step 3
In „Add Device“ this interface,continue to click „next step“,and then you
should input your WiFi‘s passwords.
Note:
- The camera only supports a 2.4GHz WiFi network.
- The number of bits in the SSID and passwords of the router should not exceed 24 digits.
Step 4
In this interface,you should scan the QR code in your phone with the camera,
when the camera comes out „dong dong dong“. And you can complete the
configuration in about 30s.
Step 5
When connecting, you should make sure your router, mobile, and camera are as
close as possible. When the camera is added successfully, click „ „ you could
also DIY the camera‘s name.
Settings
In the „ FLEXY 1F “ interface, click „ „, and you can set the camera’s common functions.
FAQ
Q: The camera cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, if not, it is better to reset the camera and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset camera only resets the network configuration of the camera, but
cannot change the configuration in the App, remove the camera in your account,
need to add it again.
Q: How to cut the camera network to another router?
A: First remove and reset the camera in your App account and then configure
your camera again by the App.
Q: Why doesn‘t the camera identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can‘t be identified when the internet environment is not good.
Q: Why I can‘t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
Video flip
Flip your video stream vertically anytime for maximum flexibility.
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high-capacity SD card storage or Cloud Storage.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
General Safety Instructions
Read the instructions before using for the first time!
- Do not operate the device beyond the specified temperature, humidity, or power source values.
- Mount the device securely on vertical surfaces (solid walls/doors) that are not prone to vibrations or shocks. Avoid excessive moisture, strong dust, and aggressive vapors.
- Do not install the devices in the vicinity of heat sources such as radiators, stoves or in the vicinity of entertainment electronics devices (e.g. TVs, stereo receivers, amplifiers).
- Handle the device carefully. Do not hit or shake as this may damage the device.
- Do not try to open or repair the device yourself – it is essential that you contact your dealer!
- In the event of disposal, the device must be disposed of separately from household waste in an environmentally friendly manner (old device collection point for electronics/batteries) (in accordance with the Electrical and Electronic Equipment Act)
- Use only a mild detergent and wipe gently with a soft cloth. Do not use strong or abrasive cleaning agents..
IMPORTANT: Only private areas may be recorded with the camera (picture and sound)! Any orientation in public space is strictly forbidden within the meaning of the law!
Detailed Technical Data
Camera
Image sensor : 1/2, 9 “2Megapixel CMOS
Resolution : 1920 (H) x1080 (V) = Full HD
Shutter speeds : 1/25 ~ 1 / 100s
Exposure: Color 0.01Lux @ F1.2 Black / White 0.001Lux @ F1.2
Infrared night sensor : up to 10 meters
Night mode : Automatic (ICR) – color / black and white
Contrast : DWDR (Digital Wide Dynamic Range)
Lens: 3.6mm @ F2.0 105 ° wide angle
Video & Audio
Compression: H.264
Bit rate : 32Kbps ~ 2Mbps
Audio: integrated loudspeaker and micro 2-way
Network
Alarm trigger: intelligent motion detection
Connection protocols: HTTP, DHCP, DNS, TCP / IP, RTSP
Connection: 2.4G Wi-Fi (IEEE802.11b / g / n)
Maximum transmission line
WiFi 2.4GHz: 0.04W
Supported software : iOS 8 or newer, Android 4.2 or newer
Security: user authentication, encrypted connection
General
Operating temperature: – 20 to 50 ° C
Power supply: DC 5V / 1A
Consumption: 4.5W max.
Storage: MicroSD card slot (max 128GB)
Dimensions: 54x50x106mm
Net weight: approx. 55g
Declaration of Conformity
Hersteller: Bea-fon Mobile GmbH Enzing 4, 4722 Peuerbach, Austria
Importeur: Bea-fon Mobile GmbH
Website: www.beafon.com
Modell: Mini 11S / FLEXY 1F / BEASH-1F-W
Artikelbeschreibung: IP Camera
Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan,Jiangsu province, China has issued the following EU-type examination certificates (Zertifikat Nr.: AOC RSHA190624001 -02 / AOC RSHA190624001-03) and RoHS-Zertifikat (Report Nr.: SZ4200713-10180E) issued. The object of the declaration described above complies with the relevant harmonization legislation of the Union: EU Directive 2014/30/EU, EU Radio Equipment Directive 2014/53/EU (RED) and RoHS Directive(EU) 2015/863 amending Annex II to Directive 2011/65/EU The manufacturer/importer is solely responsible for issuing this declaration of conformity: Test standards:
EMC Directive 2014/30/EU
Radio Equipment Directive 2014/53/EU
Documents / Resources
| bea-
fon FLEXY1F Smart Home Indoor Security
Camera
[pdf] User Manual
FLEXY1F, Smart Home Indoor Security Camera, FLEXY1F Smart Home Indoor Security
Camera, Indoor Security Camera, Security Camera, Camera
---|---