eeLink GPT46 GPS Tracker Installation Guide
- June 5, 2024
- eeLink
Table of Contents
eeLink GPT46 GPS Tracker
Locate Your IMEI
On the side of your GPT46, take note of the IMEI. This is needed to activate your tracker. If you already have a username and password, please skip stepping 4.
Activate Your Tracker
Visit http://www.sky200.com and click the “Activation” button in the upper right. Fill out all the information, including the IMEI that is printed on the side of your tracker.
Charge
See page 2 for charging instructions.
Begin Tracking
You can now log into the tracking system from a computer by visiting http://www.sky200.com and login in with your username and password. You can also download our mobile app by visiting the app store and searching for “LoneStar Tracking”.
Power ON Your Tracker
Your new GPT is shipped powered OFF. To turn on your tracker, press and hold the button on the front of the Retriever for 3 seconds until the LEDs turn ON momentarily.
CONTACT
- https://www.eelinktech.com
- Toll-Free 008615989326996
- eMail: apple@eelinktech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>