GM34-CW Cooler Master 34-Inch Curved Gaming Monitor User Guide
- June 6, 2024
- COOLER MASTER
Table of Contents
GM34-CW Cooler Master 34-Inch Curved Gaming Monitor
INSTRUCTIONS
Please read the following instructions carefully.
-
To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord. Spray a non-solvent cleaning solution onto a rag and clean the screen gently. -
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
-
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
-
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature
-
Store the LCD monitor in a room with a temperature of -20° to 60° C (- 4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
-
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
- Monitor-to-PC signal cable is frayed or damaged.
- Liquid spills onto the LCD monitor or the monitor is exposed to rain.
- The LCD monitor or case is damaged.
PACKAGE CONTENTS
CONNECT THE MONITOR TO THE SUPPORT BASE
INSTALLATION OF THE WALL-MOUNTED BRACKET
EXTERNAL CONTROL BUTTONS
Press any of the buttons to enter the quick navigation menu, i.e., to activate the Quick Mode
1
| OSD menu|
- Press the button to enter the OSD menu to activate the Quick Mode
- After entering the OSD menu, press the button to enter submenu
---|---|---
2
| Quick button for in-game crosshairs|
- Press the button under the Quick Mode to turn on in-game crosshairs
- When the OSD menu is activated, press the button for Down
3
| Quick button for Scene Mode|
- Press the button to quickly switch between the Game and Graphic Scene Mode
- When the OSD menu is activated, press the button for Up
4
| Quick button for HDR|
- Press the button under the Quick Mode to switch to HDR to turn on/off the Signal Mode
- When the OSD menu is activated, press the button to return to the last menu/exit the OSD menu
5
| Power button| Turn on/off the monitor. Blue indicates the power is on.
Flashing blue light indicates the monitor is under Standby Mode
FreeSync
Switch to the Game Mode to activate FreeSync+HDR
This function enables the graphic source supporting FreeSync to adjust the
screen refresh rate of the monitor in a dynamic manner based on the energy-
saving typical content frame rates.
It is almost able to totally prevent screen tearing and stuttering display.
Note:
- DP: 3440 x 1440 can support 144Hz, Adaptive Sync
- HDMI: 3440 x 1440 can support 100Hz, Adaptive Sync
SPECIFICATIONS
LCD panel|
Drive system
|
TFT Color LCD
---|---|---
Size
|
34″
Pixel pitch
| 0.23175(H) – 0.23175(V)
Brightness|
400nits(Max.)
Contrast
| 3000:1
Viewing angle|
178(Horizontal)178(Vertical)
Response time
| 1ms (MPRT), OD 4ms (G to G)
Panel type|
VA
Horizontal frequency| 71.52- 214.56 KHz
Vertical frequency| 48-165Hz
Display colors| 16.7 million colors
Max resolution|
DP 1.4: 3440x1440144Hz
HDMI 2.0: 3440 x 1440 100Hz
Power consumption| AC input power consumption| 54W Typical,80W Max
Standby power consumption (Max)| Standby50.5W
Input connector| DP (only for DP model) HDMI (only for HDMI model)
Input video signal| DP signal (only for DP input model)
HDMI signal (only for HDMI input model)
Speakers| 3Wx2
Audio effect| Audio output (only for audio output model)
Input| 100-240V AC, 50/60Hz 2A
Environmental conditions| Operating temperature: 0°C~40°C
Storage temperature: -20 °C -60 °C
Operating humidity: 10~85%RH
Machine size| 808.65520.82263.9mm
Weight (Net)| 6.2 kg/Unit (Net)
Machine specifications|
Inclination: -5 ° to 15 °
Rotation: Left or right rotation by 45°
Height adjustable: Lift support base with 100mm travel Removable monopod: Yes
If you have any question regarding use of the monitor, please visit:
https://www.coolermaster.com/warranty
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>