HORI PS4-052 Racing wheel APEX for PlayStation Instruction Manual
- June 5, 2024
- HORI
Table of Contents
HORI PS4-052 Racing wheel APEX for PlayStation
Mounting Racing Wheels & Pedals
Please contact the manufacturer directly for information about specific racing wheel cockpits and stands.
- PS4-052 Racing wheel APEX for PlayStation®4
- PS4-142 wireless Racing wheel APEX for PlayStation®4
Racing Wheel Unit
- This product uses a clamp instead of screws for mounting.
- The racing wheel can be attached to a hard surface that has a thickness of 6mm~45mm.
- Please refer to Image 2 for reference. This product will not properly attach to a surface that exceeds 6mm~45mm.
Clamp Attachment
Pedal Unit
- This product uses a clamp instead of screws for mounting.
- A strap may be needed to properly attach the racing wheel to the racing wheel cockpit.
- Footrest (stored)
- Footrest (is use)
AB04-001 Racing wheel Overdrive for Xbox Series X|S
- This product uses a clamp instead of screws for mounting.
- The racing wheel can be attached to a hard surface that has a thickness of 6mm~45mm.
- Please refer to Image 2 for reference. This product will not properly attach to a surface that exceeds 6mm~45mm
Clamp Attachment
- This product uses a clamp instead of screws for mounting.
- A strap may be needed to properly attach the racing wheel to the racing wheel cockpit.
AB05-001 Force feed back Racing wheel DLX for Xbox Series X|S
- This product can be attached to a racing cockpit compatible with M6 bolts.
- Two M6 bolts are needed to attach this product to a racing wheel cockpit.
- The length of the M6 bolt can be the thickness of the fixed surface + 10 mm to 25 mm.
- If wider bolts are used, there is a risk that the inside of the product may be damaged, or it may not properly attach. Please refer to the image below
M6 Bolt
Clamp Attachment
- The racing wheel can be attached to a hard surface that has a thickness of 6mm~45mm.
- Please refer to Image 2 for reference. This product will not properly attach to a surface that exceeds 6mm~45mm.
Pedal Unit
- This product can be attached to a racing cockpit compatible with M6 bolts.
- Three M6 bolts are needed to attach this product to a racing wheel cockpit.
- The length of the M6 bolt can be the thickness of the fixed surface + 10 mm to 25 mm.
- If wider bolts are used, there is a risk that the inside of the product may be damaged, or it may not properly attach. Please refer to the image below.
M6 Bolt
Documents / Resources
| HORI
PS4-052 Racing wheel APEX for
PlayStation
[pdf] Instruction Manual
PS4-052 Racing wheel APEX for PlayStation, PS4-052, Racing wheel APEX for
PlayStation
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>