HORI Device Manager for Xbox Series X Instruction Manual
- June 6, 2024
- HORI
Table of Contents
Instruction Manual
Thank you for purchasing this product.
Before using this product please read the instructions carefully.
After reading the instruction manual, please keep it for reference.
Caution
Caution
Parents/Guardians:
Please read the following information carefully.
- This product contains small parts. Keep away from children under 3 years old.
- Keep this product away from small children or infants. Seek medical attention immediately if any small parts are swallowed.
- Long cord. Strangulation hazard.
- Keep the product away from dusty or humid areas.
- Do not use this product if it has been damaged or modified.
- Do not get this product wet. This may cause an electric shock or malfunction.
- Do not place this product near heat sources or leave it under direct sunlight for an extended period. Overheating may cause malfunction.
- Do not touch the metal parts of the USB plug.
- Do not apply strong impact or weight on the product.
- Do not pull roughly or bend the cable of the product.
- Do not disassemble, modify or attempt to repair this product.
- If the product needs cleaning, use only a soft dry cloth. Do not use any chemical agents like benzene or thinner.
- Do not use this product for anything other than its intended purpose. We are not responsible for any accidents or damages in the event of use other than the intended purpose.
Included
Platform
Xbox Series X|S / Xbox One / Windows 10
| System requirements | USB Port, Internet Connection |
|---|
- Functions as PC controller through XInput.
This product does not support DirectInput.
Important
Before using this product with the Xbox Series X|S / Xbox One system, please read the included instructions carefully.
Please check that your Xbox Series X|S / Xbox One is updated to the latest system firmware.
This product is designed for the Xbox Series X|S, but it can also be used with the Xbox One and Windows 10 by following the instructions in this manual.
Layout
Steering unit
Foot pedals
How to attach Clamp
- Tighten the clamp into the steering unit base with the clamp screw.
- Use the clamp to secure the steering unit to a flat, hard surface (i.e. table).
- Do not attach to furniture made from glass or other fragile materials.
- Carefully detach from furniture to prevent damage to furniture or product.
3. Assemble the foot pedal as shown in the image below.
How to Connect
- Connect the foot pedal unit modular connector to the steering unit modular connection port.
- Set the Mode Toggle Switch to the appropriate setting then connect the USB cable.
- Do not press on any buttons when connecting the USB cable.
- Check the connector direction before inserting.
【”MODE-1″】(For Xbox Series X|S) - “MODE-1” may not function depending on the software. If that happens, please toggle to “MODE-2”.
【” MODE-2″】(If “MODE-1” does not function correctly for Xbox Series X|S or when connecting to a Windows 10 PC)
Do not turn the steering wheel while you are connecting or turning on the Xbox Series X|S. It is calibrating the center position of the steering wheel when connecting.
Quick Release
Your controller cord has a quick release. This is a safety feature designed to
reduce the chance of the Xbox Series X|S / Xbox One console or computer
falling when the cord is pulled. If the console or computer falls and hits
someone, especially a small child, it could cause a serious injury.
To reduce the risk of injuries or damage to the console or computer, it is
important to use the controller and the quick release properly. Use the
controller connector, not the quick release, to routinely connect and
disconnect the controller. If the quick release disconnects, simply reconnect
it by aligning the grooved indentations and pressing the two parts completely
together.
The controller will not work unless the quick release is connected properly.
Never tape, glue, or otherwise prevent the quick release from pulling apart.
The quick-release reduces but does not eliminate, the risk of the computer or
console being pulled off its surface.
To further reduce the risk:
- Do not allow anyone to pull on the controller or controller cord in a way that causes the computer or console to move.
- Do not allow controller cords to become crossed or tangled with one another.
Download App
『HORI Device Manager for Xbox Series X』
- Search for “HORI” on the Microsoft Store.
- Install the “HORI Device Manager for Xbox Series X” App.
About Profile
The Profile Button is used to toggle between profiles (profiles are adjusted
via the HORI Device Manager for Xbox Series X). Profiles will switch when the
Profile Button is pressed.
The following features can be adjusted in the app:
- Quick Handling Mode
- Dead Zone Adjustment
- Sensitivity Adjustment
- Assign Mode
- Profile
- D-Pad/Analog Stick Toggle Switch
The Profile LED will change based on the Profile setting.
| Profile Set | Profile LED |
|---|---|
| 1 | Green |
| 2 | Red |
| 3 | Blue |
| 4 | White |
Main Features
S teering unit
External Dimensions| 280×243×268mm
Steering Diameter| 280mm
Angle of Rotation| 270°
Weight| 1.4kg
Cable Length| 3.0m
Foot pedals
External Dimensions| 225×300×148mm
Weight| 0.9kg
Cable Length| 1.5m
THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The normal function of the product may be disturbed by strong electromagnetic
interference. If so, simply reset the product to resume normal operation by
following the instruction manual (How to connect). In case the function does
not resume, please relocate to an area that does not have electromagnetic
interference to use the product.
The wires are not to be inserted into socket outlets.
The packaging must be retained since it contains important information.
PRODUCT DISPOSAL INFORMATION
EU and Turkey only
Where you see this symbol on any of our electrical products or packaging, it
indicates that the relevant electrical product or battery should not be
disposed of as general household waste in Europe. To ensure the correct waste
treatment of the product and battery, please dispose of them in accordance
with any applicable local laws or requirements for the disposal of electrical
equipment batteries. In so doing, you will help to conserve natural resources
and improve standards of environmental protection in the treatment and
disposal of electrical waste. Applicable to EU countries and Turkey only.
US
Warranty
HORI warrants to the original purchaser that the product purchased new in its
original packaging shall be free of any defects in material and workmanship
for a period of 90 days from the original date of purchase. If the warranty
claim cannot be processed through the original retailer please contact HORI
customer support directly at [email protected]. Please
visit http://stores.horiusa.com/policies/ for warranty details.
EU
Warranty
For all warranty claims made within the first 30 days after purchase, please
check with the retailer where the original purchase was made for details. If
the warranty claim cannot be processed through the original retailer or for
any other inquiries pertaining to our products, please contact HORI customer
support directly at [email protected].
- The image on the package may differ from the actual product.
- The manufacturer reserves the right to change the product design or specifications without notice.
- Microsoft, Xbox, Xbox “Sphere” Design, Xbox Series X|S, Xbox One, Windows are trademarks of the Microsoft group of companies.
- HORI & HORI logo are registered trademarks of HORI.
MADE IN CHINA
Ages 6+