HORI 2055-50MKUS Steering Wheel Instruction Manual
- October 30, 2023
- HORI
Table of Contents
HORI 2055-50MKUS Steering Wheel Instruction Manual
Thank you for purchasing this product.
Before using this product please read the instructions carefully. After
reading the instruction manual, please keep it for reference.
How to Connect
- Make sure that direction of the modular plug is correct before connecting.
- This product can be used without the foot pedals.
This product is not a wireless controller. Turn the steering wheel to its maximum rotation position once in both directions. Press down fully into each of the L pedals and R pedals once.
- Please repeat the process when you re-connect the controller or restart the Nintendo Switch Tl’ or PC system.
Included
Platform
Nintendo Switch'”/ PC(Xinput)
Functions as PC controller through Xlnput. This product does not support
DirectJnput
Important Make sure that your Nintendo Switch™ is updated with the latest system software. May not function for titles that require motion control.
Layout
Steering Unit (Back View)
How to Mount
Option 1: Suction Cup
- Remove all dust and dirt from your tabletop before securing the controller using the five suction cups
- Attach suction cups to the steering unit when setting up.
Option 2: Clamp
- Tighten the clamp screw into the steering wheel base.
- Use the clamp to secure the steering unit to a flat, hard surface (i.e. table).
- Do not combine both securing methods as it may damage the suction cups.
- Do not affix to furniture made from glass or other fragile materials.
- Detach from furniture carefully to prevent damage to furniture or product.
Foot Pedals
Place foot pedals onto a flat surface.
Control Toggle Switch
Directional pad controls can be toggled to the directional pad, left stick, or
right stick controls. This product’s directional pad toggle function is not
guaranteed to work with all software. Please refer to the software’s
instruction book. This product does not work with Analog mode.
Button Hold function
Push and hold the Hold button to maintain the pushed state after releasing
your finger.
The button Hold function works only when the ITEM button has an ITEM function.
CAUTION
When playing Mario Kart While the Button Hold function is enabled: If you want
to use the item you pick up, press any of the ZL button/ ITEM button/ L Paddle
once to disable the Button Hold function. Then press the button again to use
the item.
Assign Mode
You can remap the function of buttons using this feature.
Programmable Buttons
ZL/ZR /LSB / RSB /ITEM/ L Paddle/ R Paddle/ L Pedal/ R Pedal
Assignable Functions
A/B/X/Y / L/ R/ZL/ZR/ LSB/ RSB/ ITEM/ L Paddle/ R Paddle
How to Adjust
- After 4 seconds of inactivity between steps, Program LED (Right) will turn off and the program mode will stop.
- During step 2, button input from the controller to the Nintendo Switch”‘ will be disabled.
- When the Program LED (Left) turns on, it indicates that a button is remapped and will not turn off until the button function is reset to default
- If you want to disable the button function, press and hold for 3 seconds the same button you pressed in step 2 at the time of step 3.
- If you pressed multiple buttons during step 3, the lost button you pressed will be assigned.
- Controller settings are stored even if the USB is disconnected.
How to reset individual buttons
Use Step 3 above to individually reset buttons to default.
How do reset all buttons/ functions to default
Quick Handling Mode
Experience quicker handling by switching the max steering output from 270 degrees to 180 degrees.
Adjustable Sens1t1v1ty
The steering wheel sensitivity is adjustable to seven levels. The Program LED
(Left) color will change to indicate the sensitivity value
Steering Unit
(The Program LED (Right) will light green when assigning buttons.)
- If you do not perform step@ after G), the Program LED (Right) will turn off after four seconds and button assignment mode will automatically end.
- During steps 2-6, only the steering unit and foot pedal input are enabled.
- Button input from the controller to the Nintendo Switch”‘ will be disabled.
- Controller settings are stored even if the USB is disconnected.
Adjustable Dead Zone
The Dead Zone is adjustable to seven levels. The program LED (Left) color will
change to indicate the dead zone value.
- If you do not perform step@ after G), the Program LED (Right) will turn off after four seconds and button assignment mode will automatically end.
- During steps 2-6, only the steering unit and foot pedal input are enabled.
- Button input from the controller to the Nintendo Switch”‘ will be disabled.
- Controller settings are stored even if the USB is disconnected.
Reset back to default settings
To simultaneously reset all of the following: Quick Handling Mode· Deed Zone
Adjustment Sensitivity Adjustment.
When Quick Handling Mode is canceled, the steering wheel input value will default to 270°. Dead zone arid sensitivity default values are set to ‘4″. If you do not perform step@ ofter G), the Program LED (Right) will turn off after four seconds end button assignment mode will automatically end.
Caution
- Never disassemble, repair, or modify this product.
- Keep the controller away from dusty or humid areas.
- Do not apply strong impact or weight on the product.
- Do not pull roughly or bend the cable of the controller.
- If the product needs cleaning, use only a soft dry cloth. Do not use any chemical agents like benzine or thinner.
- Keep this product out of the reach of children under 3.
Main Specification
THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant ta Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there ls no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference ta radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
PRODUCT DISPOSAL INFORMATION
Where you see this symbol on any of our electrical products or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for the disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste. Applicable to EU countries and Turkey only.
Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall be free of any defects in material and workmanship for a period of 90 days from the original date of purchase. If the warranty claim cannot be processed through the original retailer please contact HORI customer support directly at infous@hori.jp. Please visit http://stores.horiusa.com/policies/ for warranty details.
Warranty
For all warranty claims mode within the first 30 days after purchase, please
check with the retailer where the original purchase was made for details. If
the warranty claim cannot be processed through the original retailer or for
any other inquiries pertaining to our products, please contact HORI customer
support directly at lnfous@hori.jp. Warning, Not
suitable for children under 36 months, Long cord, Strangulation hazard. The
image on the package may differ from the actual product. The manufacturer
reserves the right ta change the product design or specifications without
notice. The wires are not to be inserted into socket outlets. The packaging
must be retained since it contains important information.
HORI & HORI logos are registered trademarks of HORI.
Download PDF:HORI 2055-50MKUS Steering Wheel Instruction
Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>