ONE FOR ALL SV 9440 Ultra Thin Indoor TV Antenna Installation Guide

: June 5, 2024
: ONE FOR ALL

Table of Contents

PRODUCT SPECIFICATIONS
START
FIND LOCAL TRANSMITTER
POSITION THE ANTENNA
FIND CHANNELS
FINE TUNING
FINISH
GUARANTEE TERMS AND CONDITIONS / SAFETY
- SAFETY PRECAUTIONS:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ONE FOR ALL SV 9440 Ultra Thin Indoor TV Antenna

PRODUCT SPECIFICATIONS

Power adapter UK
Model: S003ATB0600015
Input voltage : 100-240V
Input AC frequency: 50/60Hz
Output voltage : 6.0 VDC
Output current: 0.15 A
Output power: 0.9 W
Average active effciency: 61.0 %
No-load power consumption: 0.10 W

Class II equipment. Adapter enclosure is double insulated. Risk of electric shock, do NOT open !

Power adapter EU
Model: S003ATV0600015
Input voltage : 100-240V
Input AC frequency: 50/60Hz
Output voltage : 6.0 VDC
Output current: 0.15 A
Output power: 0.9 W
Average active effciency: 61.0 %
No-load power consumption: 0.10 W

Class II equipment. Adapter enclosure is double insulated. Risk of electric shock, do NOT open !

Frequency range
UHF : 470-694 MHz

To completely remove power from the antenna, disconnect the power adaptor from the power socket.

START

FIND LOCAL TRANSMITTER

Point your antenna in the direction of the nearest transmitter for best reception and most channels possible. For closest transmitter, check www.ofa.com/antenna or look at roof aerials in your local areas. Or download the FREE OFA Assistant App.

Download the FREE antenna setup App

www.oneforall.com/assistantapp

|

POSITION THE ANTENNA

FIND CHANNELS

For detailed instructions on how to perform a channel scan, please see the manual provided with your TV.

FINE TUNING

For better signal strength and/or quality, try diff erent locations, by moving it near a window and/or rotate it at current position.

Once the antenna is adjusted for the best signal and quality carry out ANOTHER full autotune to make sure no channels were missed.

FINISH

WWW.ONEFORALL.COM/TIPS-AND-TRICKS

Hereby, Universal Electronics BV declares that the radio equipment type SV9440 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.oneforall.com/doc_sv9440

GUARANTEE TERMS AND CONDITIONS / SAFETY

UNIVERSAL ELECTRONICS warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of two (2) years from the date of original purchase. This product will be repaired or if necessary, replaced free of charge if it has been proven to be defective within the two(2) year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS

This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified / repaired by others than UNIVERSAL ELECTRONICS or if a fault is the result of accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness.

To obtain warranty service during the warranty period contact […], and please note that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes which are not related to your trade, business or profession, you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights.

SAFETY PRECAUTIONS:

For safety reasons, ensure that the power plug (to mains) is easily accessible (not blocked or covered) so it can be used to disconnect the device.
Unplug the product if intended for cleaning. Never try to dismantle the product or push any object inside. May cause short circuit or electric shock.
Clean the product by wiping with dry slightly damp cloth. This may only be dry-dusted.
Keep a minimum distance of 5 cm around the product for suffcient ventilation.
Check and ensure that the ventilation is not impeded by covering the openings with items such as newspaper, tablecloth, curtain, etc.
Do not place near open flame sources, such as lighted candles.
To reduce the risk of fire or electric shocks do not expose this apparatus to rain or moisture, dripping or splashing.
Use the product only in moderate climates (not in tropical climates). It is not advisable to place the product in direct sunlight or in extreme weather.
This product is not intended for use by children

Connect with us

facebook.com/ oneforallworldwide

|

@oneforall.worldwide

|

linkedin.com/ company/one-for-all- worldwide/

|

youtube.com/ user/oneforallproducts

---|---|---|---
| SV9440
710665
RDN-1310521
---|---