EDIFIER XM3 Multimedia Speaker User Manual
- June 5, 2024
- Edifier
Table of Contents
EDIFIER XM3 Multimedia Speaker
Important safety instruction
- Please read the instructions carefully. Keep it in safe place for future reference.
- Use only accessories approved by the manufacturer.
- Install the instrument properly by following the instructions in the device connection section.
- Using the product in a 0-35℃ environment is recommended.
- To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
- Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing.
- Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).
- Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product.
- Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric shock.
- Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended).
- Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and is oriented to the right direction.
- Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake.
- Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately.
- Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first.
- Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning.
Excessively loud music may lead to hearing loss. Please keep the volume in a safe range. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Power warning:
- Place the product near the power outlet for easy use.
- Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can be found on the product plate.
- For safety purpose, unplug the product during lightning storms or when unused for extended periods of time.
- Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution.
- Safety warning labels on the housing or bottom of the product or power adaptor.
This symbol is to alert the user to the presence of an un-insulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons. This symbol is to warn the
user not to disassemble the enclosure of the product and there is no user-
replaceable part inside. Take the product to an authorized service center for
repair.
This symbol indicates that the product is for indoor use only. This symbol
indicates that the product is a CLASS II or double insulated electrical device
with no earth requirement. The MAINS plug is used as the disconnect device,
the disconnect device shall remain readily operable.
Unpack the box
Box Contents
Illustration
- Connect to subwoofer
- Connect to subwoofer
- Volume knob
- Bass volume knob
- Line in port
- Power indicator
- Left satellite speaker output
- Right satellite speaker output
- Power switch
- Power cable
Connection
- Connect satellite speakers to the subwoofer using a connecting cable from the satellite speakers; please note the color matching (red for right and white for left).
- Connect the subwoofer to a power source using a power cable from the subwoofer and turn on the power switch, LED light will be lit and the speaker will be on.
- Connect audio source (mobile phone, MP3/MP4 player etc) to line in port on the side panel of the subwoofer.
- Play music and adjust the volume to the desired level.
Specifications
- Power output: R/L: 12W+12W SW: 16W
- Frequency response: R/L: 185Hz-20KHz SW: 50Hz-200Hz
- Bass unit: 5 1/4 inch (148mm)
- Mid-range and treble unit: 3 1/2 inch (88mm)
- Input: Line in
There are no restrictions of use.
Troubleshooting
| Problem | Solution |
|---|---|
| No sound | • Check if the power indicator light is ON. |
• Try to turn up the volume using the volume knob.
• Ensure the audio cables are firmly connected and the input is set correctly
on the speakers.
• Check if there is a signal output from the audio source.
The XM3 does not turn on| • Check if main power is connected, or if the wall
outlet is switched on.
To learn more about EDIFIER, please visit www.edifier.com For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms. USA and Canada: service@edifier.ca South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>