Little GIANT 506357 6-CIA Sump Pump User Guide

: June 15, 2024
: Little Giant

Table of Contents

Little GIANT 506357 6-CIA Sump Pump
Product Information
Product Usage Instructions
Ratings
Materials of Construction
Installation
Other Information
order-info).
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Little GIANT 506357 6-CIA Sump Pump

Little-GIANT-506357-6-CIA-Sump-Pump-product

Product Information

Specifications:

Item: 506357
Model: 6-CBA
HP: 1/3 hp
Frequency: 50/60 Hz
Phase: Single-Phase
Amps – Full Load: 9 A
Amps – Starting: 14.3 A
Full Load Watts: 720 W
Volts: 115 VAC
Cord Length: 10 ft
Pump Power Cord Type: SJTW
Pump Power Cord Gauge: 16-3
Lead Length: 10 ft
Motor Type: Submersible
Continuous Duty: Yes
Thermal Overload Protection: Yes
Protection [IP]: IP68
Maximum Flow Rate – 60Hz: 46 gpm / 2760 gph
Minimum Flow Rate – 60Hz: 10 gpm / 600 gph
Max Flow Rate – 50Hz: 40 gpm / 2400 gph
Shut-Off Minimum Head – 60Hz: 18 ft
Shut Off Height – 50Hz: 4.27 ft
Shut Off Height – 60Hz: 13 ft
Stages: 1
Max Solid Handling Size: 0.13
Switch Type: Integral Diaphragm
Motor Cooling: Oil
Liquid Max Fluid Temperature:
Pump Base Material: Plastic
Pump Body Material: Cast Bronze
Pump Volute Material: Polypropylene
Impeller Type: Non-Clog
Impeller Material: Nylon
Motor Shaft End Material: 420 Stainless Steel
Check Valve: No
Intake Screen Material: Nylon
Fasteners Material: Stainless Steel
Top Bearing Material: Bronze Sleeve
Top Bearing Type: Carbon/Ceramic, Nitrile
Seal Material: Carbon/Ceramic/Nitrile
Seal Type: None
Discharge Thread: FNPT Threaded – FNPT 1.5
Discharge Type: Screened
Discharge Suction Type: 9.5
Product Length: 7.5
Product Width: 6
Product Height: 9.5
Pump Length: 19.25 lb
Product Weight: 20.25 lb
Carton Length: 10
Carton Width: 10
Carton Height: 9
Off Level – Range: 1 – 4
On Level – Range: 7 – 10
Accessories Included: None
Accessories/Repair Kits: 108101, 928004, 106079, 909021, 108482, 599026, 599025
Electrical Agency Approvals: CSA
Standard Warranty: 36 Months

Product Usage Instructions

Installation:
To install the 6-CIA sump pump, follow these steps:

Ensure the power source is disconnected before installation.
Select a suitable location for the pump in your basement or desired area.
Ensure the pump is placed on a stable and level surface.
Connect the discharge thread to the desired outlet using a suitable connector.
If using a screen, attach it to the discharge to prevent debris from entering the pump.
Ensure the pump is securely fastened in place using appropriate fasteners.
Connect the pump power cord to a compatible power source.

Operation:
To operate the 6-CIA sump pump, follow these steps:

Ensure the pump is properly installed and connected to a power source.
Make sure the pump is submerged in the water or liquid to be pumped.
Ensure the intake screen is clear of any debris or obstructions.
Once ready, turn on the power source to activate the pump.
The pump will automatically start pumping water when the liquid level reaches the designated level.
The pump will continue pumping until the liquid level drops below the designated off-level.

Maintenance:
To maintain the 6-CIA sump pump, follow these guidelines:

Regularly inspect the pump and power cord for any signs of damage or wear.
Clean the intake screen and ensure it is free from debris or blockages.
Check the pump’s motor shaft end for any signs of corrosion or damage.
If necessary, lubricate the motor shaft end with appropriate oil.
Monitor the pump’s performance and ensure it is operating efficiently.
If any issues arise, refer to the troubleshooting section of the user manual or contact customer support.

FAQ (Frequently Asked Questions)

Q: What is the maximum flow rate of the 6-CIA sump pump?
A: The maximum flow rate of the pump is 46 gallons per minute (2760 gallons per hour) at 60Hz.
Q: Can the 6-CIA sump pump handle solids?
A: Yes, the pump has a non-clog impeller and can handle solids up to a maximum size of 0.13 inches.
Q: Does the pump come with any accessories or repair kits?
A: No, the pump does not come with any accessories or repair kits. However, compatible accessories and repair kits are available for purchase separately.
Q: What is the warranty period for the 6-CIA sump pump?
A: The pump comes with a standard warranty of 36 months.

The 6-CIA sump pump is a float-operated submersible pump intended for continuous use for dewatering and water transfer applications in residential and light industrial use. Bronze motor housing specific for use in brackish water.

Item: 506357
Model: 6-CBA

Ratings

HP	1/3 hp
Frequency	50/60 Hz
Phase	Single-Phase
Amps – Full Load	9 A
Amps – Starting	14.3 A
Full Load Watts	720 W
Volts	115 VAC
Cord Length	10 ft
Pump Power Cord Type	SJTW
Pump Power Cord Gauge	16-3
Lead Length	10 ft
Motor Type	Submersible
Continuous Duty	Yes
Thermal Overload Protection	Yes
Protection [IP]	IP68
Maximum Flow Rate – 60Hz	46 gpm / 2760 gph
Minimum Flow Rate – 60Hz	10 gpm/600 gph
Max Flow Rate – 50Hz	40 gpm/2400 gph
Shut-Off	18 ft
Minimum Head – 60Hz	4.27 ft
Shut Off Height – 50Hz	13 ft
Shut Off Height – 60Hz	18 ft
Stages	1
Max Solid Handling Size	0.13 “
Switch Type	Integral Diaphragm
Motor Cooling	Oil

Liquid

Max Fluid Temperature 140 °F

Materials of Construction

Pump Base Material	Plastic
Pump Body Material	Cast Bronze
Pump Volute Material	Polypropylene
Impeller Type	Non-Clog
Impeller Material	Nylon
Motor Shaft End – Material	420 Stainless Steel
Check Valve	No
Fasteners Material	Stainless Steel
---	---
Top Bearing Material	Bronze
Top Bearing Type	Sleeve
Seal Material	Carbon/Ceramic, Nitrile
Seal Type	Carbon/Ceramic/Nitrile

Installation

Discharge Thread	FNPT
Discharge Type	Threaded – FNPT
Discharge	1.5 “
Suction Type	Screened
Product Length	9.5 “
Product Width	7.5 “
Product Height	6 “
Pump Length	9.5 “
Product Weight	19.25 lb
Product Weight w/ Pack	20.25 lb
Carton Length	10 “
Carton Width	10 “
Carton Height	9 “
Off Level – Range	1″ – 4″
On Level – Range	7″ – 10″