M2316E1 Redmi Buds 5 Wireless Earphone User Manual
- June 1, 2024
- Mi
Table of Contents
M2316E1 Redmi Buds 5 Wireless Earphone
Specifications:
- Name: Wireless Earphones
- Model: M2316E1
- Charging Case: Type-C
- Frequency Band: 2402-2480 MHz
- Battery Capacity: 480 mAh
- Max RF Output Power (EIRP):
Product Usage Instructions
Charging:
Make sure the earbuds and the charging case are adequately charged before
initial use.
Connecting with App:
- Scan the QR code to download and install Xiaomi Earbuds App on your smartphone.
- Follow the instructions on the app to connect the earbuds to your device (compatible with Android & iOS).
Touch Controls:
The touch area is located on the upper part of the earbud stem. Use the
touch controls as shown in the manual to navigate playback, calls, and other
functions.
Troubleshooting:
If you encounter any issues with connectivity or functionality, refer to
the user manual or contact customer support for assistance.
Frequently Asked Questions (FAQ):
-
Q: How do I reset the earbuds?
A: To reset the earbuds, place them in the charging case and hold the touch area for 10 seconds until the LED indicators flash. -
Q: Can I use only one earbud at a time?
A: Yes, you can use either the left or right earbud independently for mono audio playback. -
Q: How do I check the battery status?
A: The battery status of the earbuds can be checked through the Xiaomi Earbuds App on your connected smartphone.
Read this manual carefully before use, and retain it for future reference.
Connecting with App
- Scan the QR code to download and install Xiaomi Earbuds to enable more features.
- Follow the instructions on the app to connect the earbuds.
Scan the QR code to download Xiaomi Earbuds App.
Note : During the connection process, please make sure that the smartphone’s Bluetooth is enabled. Put the earbuds into the charging box, open the lid, and ensure that your smartphone is near the box.
Specifications
- Model: M2316E1
- Name: Wireless Earphones Charging Case
- Charging Port: Type-C
- Battery Capacity: 480 mAh
- Earbuds
- Wireless Range: 10 m
- (in an obstacle-free environment)
- Input: 5 V 150 mA
- Wireless Connectivity:
- Bluetooth® 5.3
- Input: 5 V 500 mA
- Output: 5 V 320 mA
- Frequency Band: 2402-2480 MHz
- Max RF Output Power(EIRP): < 20 mW
- Operating Temperature: 0 °C to 45 °C
Compatible with: This product only supports certain Android or iOS systems. For detailed information, please check the product page on www.mi.com.
Note:
Once the weather is cold outdoors and your hands become dry, the earbuds may
not function when touching them
WHAT IN BOX
OVERVIEW
HOW TO USE
Important Safety Information
- The product has a built-in battery that can not be removed or replaced. To avoid damage to the battery or the product, do not disassemble or modify the battery by yourself. The battery can only be replaced by authorized service providers and must be replaced with the same type.
- Replacement of a battery with an incorrect type may defeat a safeguard (such as catching fire, explosion and leakage of corrosive electrolyte). Do not dispose of used batteries with household waste. Disposal of this product and the used batteries shall comply with local laws and regulations.
- Do not attempt to disassemble, repair or modify the product, as this may cause fire or even completely damage the product.
- Keep the product’s indicator away from the eyes of children and animals while the product is in use Do not disassemble, puncture or crush the product nor expose it to fire.
- Please stop using the product immediately and seek medical assistance if the contact area on your skin shows signs of redness or swelling
- To prevent possible hearing loss, do not use high volume for long periods.
- This product is not a toy and may contain small parts. Please keep them out of the reach of children.
- Disposal of a battery into a fire or a hot oven or water or other liquids or mechanically crushing or cutting of a battery can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding enviornment that can result in an explosion or the leakage of flammable liquid or gas.
- To prevent possible hearing loss, do not use high volume for long periods.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- Product information and certification marks are located in the Charging Case.
- Enabling noise cancelling may affect your awareness of surrounding sounds and alarms. Ensure that you are in a safe environment before using this function.
- Do not expose the product to environments with a temperature that is too low or too high (below 0°C or above 45°C).
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.
EU DECLARATION OF CONFORMITY
Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the
radio equipment type M2316E1 complies with Directive 2014/53/EU. The full text
of the EU Declaration of Conformity is available at the following internet
address: http://www.mi.com/global/service/support/declaration.html
Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the
radio equipment type M2316E1 complies with Radio Equipment Regulations 2017.
The full text of the UKCA declaration of conformity is available at the
following internet address:
http://www.mi.com/uk/service/support/declaration.html
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISED Compliance Statements
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
RF Exposure Compliance
This equipment complies with FCC/ISED radiation exposure limits set forth for
an uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the FCC/ISED. These requirements set a SAR limit of 1.6
W/kg averaged over one gram of tissue. The highest SAR value reported under
this standard during product certification for use when properly worn on the
Head, with 0mm separation.
FCC ID: 2A3OD-M2316E1 IC: 27978-M2316E1 CAN ICES-003(B)/NMB-003(B)
Warranty Notice
As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi’s official website https://www.mi.com/en/service/warranty/. Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user’s negligence or fault are not warranted. The contact person for the after-sale service may be any person in Xiaomi’s authorized service network, Xiaomi’s authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify. Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
Complies with IMDA Standards DB106135
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>