Yamaha TW-E3A Truely Wireless Earphones User Manual

YAMAHA TW-E3A Truly Wireless Earphones

Introduction

Thank you for purchasing this Yamaha product.

• For correct and safe use of this product, be sure to first read this manual and the separate “Safety Brochure”.
• After reading this manual, keep it together with the warranty card in a safe place for future reference.

A. Product, Accessory and Part Names

• Earphones (L, R)
  ***** The microphone is built in.

• Function key

• Indicator

• Charging case

• Charging connector

• Eartips (SS, S, M, L) 1 set each
  ***** The M-size eartips are attached.

• Silicone Sleeve (S, M) 1 set each
  ***** The S-size silicone sleeves are attached.

• USB power cable

• Startup Guide

• User’s Guide (Basic) (this manual)

• Safety Brochure

Preparation

B. Charging

To charge the charging case and earphones, connect the included USB power cable to the charging connector on the charging case and to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).

• The indicator is lit in orange during charging and goes off when charging is completed.
• Charging takes about two hours. When charged, the earphones can play back continuously for approximately 6 hours.

C. Making a Bluetooth® connection

When using the earphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.

■ Pairing

1. Remove the right earphone from the charging case.
   ***** The indicator on the right earphone flashes alternately in blue and red, and the earphone enters pairing standby mode.

2. Remove the left earphone from the charging case.

3. Operate the connected Bluetooth device to display the Bluetooth setting screen.

4. Select “Yamaha TW-E3A R” from the displayed screen.
   When pairing has completed, the indicator lights up in blue for 20 seconds.
   If pairing has not completed within two minutes, it will be considered to have failed, and the indicator goes off.
   To try pairing again, turn the earphones off, then on again.

**■ Registering another Bluetooth device/ Perform pairing operations

again**

For details about paring, refer to the this website.

■ Turning on

Remove the earphones from the charging case. Otherwise, press the function key on each earphone (left and right) for two seconds.

• When the earphone turns on, the indicator lights up in blue (for one second).

■ Turning off

Place the earphone in the charging case. Otherwise, press the
function key on each earphone (left and right) for five seconds.

• When the earphone turns off, the indicator lights up in red (for one second).

Basic operations

Listening to music

Play: Press the function key on either the left or right earphone once.
Pause: During playback, press the function key on either the left or right earphone once.
Raise the volume: Press the function key on the right earphone twice.
Lower the volume: Press the function key on the left earphone twice.
Skip to the next song: Hold down the function key on the right earphone for two seconds.
Go back to the beginning of the song, or skip to the previous song: Hold down the function key on the left earphone for two seconds.

Using the phone

Receive a phone call: When a phone call comes in, press the function key on the right earphone once.
End a phone call: During the phone call, press the function key on the right earphone once.
Raise the conversation volume: Press the function key on the right earphone twice.
Lower the conversation volume: Press the function key on the left earphone twice.
Ignore a call:  When a phone call comes in, hold down the function key on the right earphone for two seconds.

Specifications

Bluetooth version: Version 5.0
Supported profiles: A2DP, AVRCP, HFP, HSP
Supported codecs: SBC, AAC, Qualcomm® aptX™
RF Output Power: Class 2
Maximum communication range: Approximately 10 m (without interference)
Number of devices that can be registered: Up to 3 devices
Internal rechargeable battery: Lithium-ion battery
Charging time Earphones: Approximately 2 hours Charging case: Approximately 2 hours
Continuous playback time Approximately 6 hours
Charging frequency from
charging case
Approximately 3 times
Charging temperature 5 – 40 °C

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.

Yamaha TW-E3A Truely Wireless Earphones User Manual – Optimized PDF
Yamaha TW-E3A Truely Wireless Earphones User Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>